Engine Service:
All engine diagnostics, disassembly, inspection, repair, and reassembly for V6 variants.
Transmission Service:
Automatic Transmission (e.g., 42LE) and Manual Transmission (if applicable) service, diagnostics, and overhaul.
Chassis Systems:
Suspension, steering (including power steering), brakes (including ABS and parking brake), and wheel/tire service.
Electrical Systems:
Complete wiring schematics, diagnostic procedures for all electrical components, including lighting, instruments, power accessories, and multiplex communication.
Body And Interior:
Body panel repair, door mechanisms, interior trim, seats, glass, mirrors, and external components.
HVAC And Comfort:
Air conditioning system service, climate control, heater core, and related components.
Engine Control System:
Detailed coverage of the Powertrain Control Module (PCM), sensors (e.g., crankshaft position, camshaft position, oxygen sensors), actuators, and diagnostic trouble codes (DTCs).
Fuel Service Specifications:
Fuel pump pressure, injector flow rates, fuel filter replacement procedures, and related specifications.
Emission Control:
EGR system, evaporative emission control (EVAP) system, catalytic converter operation, and emission testing procedures.
Intake Exhaust Cooling:
Intake manifold, exhaust system components, cooling system (radiator, water pump, thermostat, hoses), and heater core service.
Lube System:
Engine oil lubrication system, oil pump, oil filter, oil pan, and related components.
Ignition Starting Charging:
Ignition system (spark plugs, coils, wires), starting system (starter motor, solenoid), and charging system (alternator, regulator).
Transfer Propeller Shaft Drive Shaft Differential:
If applicable for AWD variants or specific configurations, coverage of these drivetrain components.
Axle Suspension:
Front and rear suspension components (struts, shocks, control arms, bushings), wheel bearing replacement, and axle service.
Tire And Wheel:
Tire pressure specifications, wheel alignment procedures, balancing, and mounting.
Brake Control:
Brake fluid specifications, bleeding procedures, master cylinder, brake booster, and ABS control module.
Parking Brake:
Operation, adjustment, and service of the parking brake system.
Steering Column:
Steering column assembly, ignition switch, tilt/telescope mechanisms, and related components.
Power Steering:
Power steering pump, rack and pinion assembly, hydraulic lines, fluid, and steering wheel.
Supplemental Restraint System:
Detailed explanation of airbag system operation, diagnostic procedures for sensors, control modules, and airbag unit replacement with safety precautions.
Seat Belt:
Service and inspection of seat belt retractors, buckles, and anchor points.
Engine Immobilizer:
If equipped, diagnostic and repair procedures for the factory engine immobilizer system.
Cruise Control:
Component testing, troubleshooting, and adjustment of the cruise control system.
Wiper And Washer:
Wiper motor, linkages, blades, washer pump, fluid reservoir, and nozzle service.
Door Lock:
Power door locks, central locking systems, actuator repair, and keyless entry integration (if applicable).
Meter Audio Visual:
Instrument cluster (gauges, warning lights), trip computer, and factory audio system components.
Horn:
Horn operation, wiring, and replacement.
Windshield Glass Mirror:
Windshield replacement, sealant application, mirror housing service, and heated mirror operation (if applicable).
Instrument Panel:
Removal and installation of instrument panel components, including airbags, HVAC controls, and switches.
Seat:
Seat track adjustment, seat frame repair, power seat mechanisms, and seat heating elements.
Engine Hood Door:
Hood latch mechanism, hinges, springs, and door hinge service, adjustment, and alignment.
Exterior And Interior:
Body panels, bumpers, fenders, quarter panels, door panels, headliner, carpet, and trim component service.
Supplemental Restraint System:
Airbag system diagnostics, service, and safety precautions.
Maintenance Procedures:
Scheduled maintenance, fluid changes, filter replacements, lubrication, tune-ups, and inspection points.
Diagnostic Procedures:
Step-by-step diagnostic routines for identifying malfunctions using symptom-based troubleshooting and OBD-II (if applicable).
Repair Procedures:
Detailed instructions for component removal, repair, replacement, and reassembly for all vehicle systems.
Troubleshooting Guide:
Comprehensive troubleshooting charts and diagnostic flowcharts for common and uncommon issues.
Depth Of Coverage:
Factory-level detail, covering everything from basic maintenance to complete engine and transmission overhauls, including electrical system diagnostics and component-level repair.
Wiring Schematics Detail:
Comprehensive and detailed wiring diagrams for all electrical systems, including engine control, body control modules, lighting, and accessories.
Oil Change Interval:
Typically 3,000 to 7,500 miles (4,800 to 12,000 km) or 3 to 6 months, depending on driving conditions and oil type. Refer to manual for specific recommendation.
Timing Belt Replacement:
For 3.0L V6 (100 series), typically around 60,000 - 100,000 miles (96,000 - 160,000 km). For 3.5L V6 (ES/EG), it's a timing chain, not a belt, requiring no periodic replacement.
Engine Oil Type:
Refer to manual for specific viscosity grade (e.g., 5W-30, 10W-30) and API service classification.
Transmission Fluid Type:
ATF+3 or ATF+4 (or equivalent specification) for the 42LE automatic transmission. Check manual for exact fluid type.
Coolant Type:
Ethylene Glycol based coolant, typically a 50/50 mix with distilled water. Refer to manual for specific Mopar coolant specification.
Intake Manifold Gasket Leaks:
Common on earlier V6 engines, leading to coolant or vacuum leaks. The manual provides diagnostic and repair procedures.
Automatic Transmission Issues:
Potential for torque converter shudder or internal wear. Manual offers troubleshooting and repair guidance.
Power Window Motors:
Some models experienced premature failure of power window regulators and motors. Manual details replacement procedures.
Climate Control Actuators:
Failure of mode or blend door actuators can cause HVAC system issues. Manual covers diagnosis and replacement.