Engine Mechanical:
Complete disassembly, inspection, repair, and reassembly of all engine components (e.g., cylinder head, block, pistons, crankshaft, camshaft).
Engine Management:
Fuel injection, ignition system, sensors, actuators, engine control module (ECM) diagnostics and calibration.
Fuel System:
Fuel pump, fuel injectors, fuel pressure regulator, fuel lines, fuel tank, throttle body operation and servicing.
Cooling System:
Radiator, water pump, thermostat, hoses, coolant flow, flushing and refilling procedures.
Lubrication System:
Oil pump, oil filter, oil pan, oil passages, lubrication schedules, oil type specifications.
Transmission Manual:
Clutch operation, gear selection, internal components, servicing and repair procedures for manual transmissions.
Transmission Automatic:
Torque converter, valve body, planetary gear sets, transmission control module (TCM) diagnostics, fluid type and capacity, servicing.
Drivetrain:
Transfer case operation, front and rear drive shafts, universal joints, axle assemblies, differential servicing.
Suspension System:
Front and rear suspension components (struts, shocks, control arms, coil springs), alignment specifications.
Steering System:
Power steering pump, steering gear/rack and pinion, tie rods, steering column, alignment procedures.
Brake System:
Front and rear brake calipers/drums, master cylinder, brake lines, ABS system operation and diagnostics, fluid specifications.
Electrical System Overview:
Battery, charging system (alternator), starting system (starter motor), lighting, accessories.
Body Electrical:
Power windows, door locks, mirrors, interior lighting, horn, wipers, cruise control.
Instrumentation And Gauges:
Speedometer, tachometer, fuel gauge, temperature gauge, warning lights, diagnostic indicators.
Climate Control:
HVAC system operation, blower motor, evaporator, condenser, refrigerant, troubleshooting.
Emission Control:
Catalytic converter, oxygen sensors, EGR system, evaporative emission control (EVAP) system, diagnostic trouble codes (DTCs).
Chassis Body:
Frame construction, body panels, doors, hood, tailgate, glass replacement, interior trim.
Routine Maintenance:
Oil and filter changes, fluid level checks and top-offs, spark plug replacement, air filter replacement.
Troubleshooting Guides:
Systematic diagnostic procedures for common and uncommon issues across all major vehicle systems.
Component Replacement:
Step-by-step instructions for replacing major and minor components (e.g., water pump, starter, alternator, brake pads).
Rebuilding Procedures:
Detailed instructions for rebuilding major assemblies like engines and transmissions.
Diagnostic Trouble Code Interpretation:
Explanation of DTCs and recommended diagnostic steps.
Torque Specifications:
Precise torque values for critical fasteners throughout the vehicle.
Alignment Procedures:
Front and rear wheel alignment specifications and adjustment procedures.
Electrical Component Testing:
Testing methods for sensors, actuators, switches, and other electrical components.
Wiring Harness Repair:
Guidance on diagnosing and repairing damaged wiring harnesses.
Special Tool Requirements:
Identification of specific tools required for certain repair procedures.
Depth Of Coverage:
Comprehensive, covering from basic maintenance to complete engine and transmission overhauls. Suitable for DIY enthusiasts and professional mechanics.
Diagram Quality:
High-quality, detailed diagrams and exploded views for clear visual guidance.
Instruction Style:
Easy-to-read, step-by-step instructions.
Service Intervals Oil Change
Oil And Filter Interval:
Every 3,000 to 5,000 miles or 6 months, whichever comes first (refer to manual for exact recommendation).
Service Intervals Coolant
Coolant Flush Interval:
Every 30,000 miles or 2 years (refer to manual for exact recommendation).
Service Intervals Transmission
Automatic Transmission Fluid Change:
Every 30,000 to 50,000 miles (refer to manual for exact recommendation).
Service Intervals Spark Plugs
Spark Plug Replacement Interval:
Every 30,000 to 60,000 miles depending on plug type (refer to manual for exact recommendation).
Engine Oil Type 4.0L:
API SJ or SL, SAE 10W-30 (check manual for specific viscosity and certifications).
Engine Oil Type 2.5L:
API SJ or SL, SAE 5W-30 or 10W-30 (check manual for specific viscosity and certifications).
Coolant Type:
Ethylene glycol-based coolant, meeting Chrysler MS-12106 specifications.
Automatic Transmission Fluid Type:
ATF+3 or ATF+4 (check manual for exact specification).
Common Issue Cooling System:
Leaking heater core, radiator failure, thermostat sticking.
Common Issue Electrical:
Idle Air Control (IAC) valve issues, power window motor failures, alternator problems.
Common Issue Suspension Steering:
Worn ball joints, tie rod ends, and steering box play.
Common Issue Engine 4.0L:
Oil filter adapter O-ring leaks, rear main seal leaks, cracked cylinder heads (less common in '95 models).