您的购物车
😊 Product added to cart successfully   Product removed to cart successfully
你的购物车是空的!
继续购物
1 / 2

Daihatsu Cuore-Mira L701 1998-2003 Repair Service Manual

常规价格
$16.99
促销价
$16.99
常规价格
🏷️ Basic Information Identification Make: Daihatsu Model: Cuore / Mira Chassis Code: L701 Model Years Covered: 1998, 1999, 2000, 2001, 2002, 2003 👋 Introduction Market Position Segment: Subcompact / Kei...
28 people are viewing this right now
类型: Car
厂商:
斯库: 464264
Daihatsu Cuore-Mira L701 1998-2003 Repair Service Manual
🏷️ Basic Information
Identification
Make:
Daihatsu
Model:
Cuore / Mira
Chassis Code:
L701
Model Years Covered:
1998, 1999, 2000, 2001, 2002, 2003
👋 Introduction
Market Position
Segment:
Subcompact / Kei car (in Japan)
Target Audience:
Budget-conscious consumers, city dwellers, first-time car buyers, markets valuing fuel efficiency and compactness.
Competitive Analysis
Key Competitors:
Suzuki Alto, Mitsubishi Minica, Honda Life, Nissan Pino/Cervo, Toyota Passo/Duo (depending on market).
Key Features
Vehicle Philosophy:
Affordability, fuel economy, maneuverability, and practical interior space for its size.
Manual Value Proposition:
Provides in-depth technical knowledge for maintaining and repairing a reliable, yet potentially complex, small vehicle, empowering owners and independent workshops.
📋 Manual Details
Coverage Areas
Primary Markets:
Global (primarily Asia, Europe)
Regions Specific:
Likely specific to markets where L701 was prevalent, may include JDM and export variants.
Page Count
Estimated Pages:
Typically 500-1000+ pages for a comprehensive factory-level repair manual.
Manual Type
Type:
Repair Service Manual
Classification:
Workshop Manual / Factory Service Manual (FSM) equivalent
Language
Language:
English
Format
File Format:
PDF
Delivery Method:
Instant Download
📖 Manual Coverage
Systems Covered
Engine:
Detailed diagnostics, repair, and overhaul procedures for gasoline engines. Specific engine codes would be required for precise coverage, but typically includes timing belt/chain, lubrication, cooling, fuel injection, ignition systems.
Transmission:
Coverage for manual and potentially automatic transmissions, including clutch, gear shifting mechanisms, lubrication, and diagnostic procedures.
Drivetrain:
Front-wheel drive components, including axles, CV joints, and differential (if applicable).
Suspension:
Front and rear suspension systems, including shock absorbers, struts, control arms, springs, and alignment specifications.
Steering:
Steering rack, tie rods, power steering system (if equipped), and steering angle sensor calibration (if applicable).
Brakes:
Front and rear braking systems (likely disc front, drum rear), including brake calipers, pads, rotors, master cylinder, brake lines, and ABS diagnostics (if equipped).
Electrical System:
Comprehensive wiring diagrams, component locations, fuse/relay identification, battery, charging system (alternator, starter), lighting, instrumentation, and accessory circuits.
Body And Chassis:
Body panel removal/installation, interior trim, doors, glass, bumpers, and chassis structural information. May include rust repair or corrosion prevention guidelines.
HVAC:
Heating, ventilation, and air conditioning system diagnostics and repair, including refrigerant handling (with proper safety precautions).
Fuel System:
Fuel tank, fuel pump, fuel lines, fuel injectors, and evaporative emissions control system.
Cooling System:
Radiator, water pump, thermostat, cooling fans, and heater core. Coolant types and capacities.
Procedures Included
Maintenance:
Scheduled maintenance tasks, fluid changes, filter replacements, lubrication points, and inspections.
Disassembly Assembly:
Step-by-step instructions for dismantling and reassembling major components and sub-assemblies.
Troubleshooting:
Diagnostic flowcharts and symptom-based troubleshooting guides for common problems.
Repair:
Detailed repair procedures for specific components and systems, often with torque specifications and special tool requirements.
Cleaning Reinstalling:
Instructions for cleaning parts before reassembly and proper installation techniques.
Technical Depth
Depth:
Comprehensive, suitable for professional technicians, but also accessible to advanced DIY mechanics with basic knowledge.
Diagnostic Capabilities:
Covers on-board diagnostics (OBD-I/OBD-II if applicable), diagnostic trouble codes (DTCs), and sensor data interpretation.
Special Tools:
Lists required special tools and equipment for specific repair procedures.
📊 Manual Specifications
File Format
Printability:
Full Printable
Searchability:
Likely text-searchable if properly indexed PDF.
Zoom Capability:
Yes (Zoom IN/OUT)
Software Requirements:
Adobe PDF Reader, WinZip
Compatibility:
All Versions of Windows & Mac
Binding Type
Digital Binding:
N/A (Digital PDF)
Paper Type
Digital Paper Type:
N/A (Digital PDF)
⚙️ Engine Specifications
Primary Engine
Engine Family:
Daihatsu EF-series
Displacement:
Typically 659cc (for JDM kei car regulations), or slightly larger for export models (e.g., 1.0L).
Cylinder Configuration:
Inline 3-cylinder (I3)
Aspiration:
Naturally Aspirated (NA) or Turbocharged (for certain variants, especially in Japan).
Performance
Horsepower Range:
Approximately 50-65 hp for NA, 64+ hp for turbocharged JDM models.
Torque Range:
Typically 55-70 Nm for NA variants.
Fuel System
Fuel Delivery:
Electronic Fuel Injection (EFI)
Fuel Type:
Unleaded Gasoline
Engine Management
Ignition System:
Distributorless Ignition System (DIS) or Distributor-based (depending on specific engine variant).
🔧 Transmission
Standard
Type:
5-speed Manual Transmission (MT)
Optional
Type:
3-speed or 4-speed Automatic Transmission (AT)
Features
Drivetrain Layout:
Front-Wheel Drive (FWD)
Gear Ratios:
Specific gear ratios are detailed within the manual, crucial for performance tuning and diagnostics.
Fluid Specifications
Manual Transmission Fluid:
Likely GL-4 SAE 75W-90 or 80W-90 gear oil. Specific recommendation found in manual.
Automatic Transmission Fluid:
Dexron II or equivalent ATF. Specific recommendation found in manual.
📐 Dimensions
Exterior
Length:
Approx. 3395 mm (for JDM kei car regulations)
Width:
Approx. 1475 mm (for JDM kei car regulations)
Height:
Approx. 1450 mm (for JDM kei car regulations)
Wheelbase:
Approx. 2360 mm
Weights
Curb Weight:
Approx. 700-800 kg (varies by specification)
Gross Vehicle Weight Rating:
Refer to vehicle's compliance plate; typically around 1100-1200 kg.
🛡️ Safety Features
Ratings
Crash Test Results:
Likely limited public data for this era and segment. Specific regional safety ratings (e.g., Euro NCAP, JNCAP) would be detailed in relevant sections of the manual if available.
Active Features
ABS:
Optional on many variants.
E Brake:
Mechanical parking brake.
Passive Features
Airbags:
Driver airbag standard on some later models and higher trims; passenger airbag optional or unavailable.
Seatbelts:
Three-point front seatbelts with pre-tensioners (on some models), two-point rear belts.
Body Structure:
Designed with crumple zones to absorb impact energy, though less advanced than contemporary larger vehicles.
💡 Technology Features
Infotainment
Audio System:
Basic AM/FM radio with cassette player or CD player (optional). Speaker configurations vary.
Dashboard Features:
Analogue speedometer, tachometer (optional), fuel gauge, engine temperature gauge, warning lights.
Driver Assistance
Parking Aids:
Rear parking sensors were a rare optional addition, not standard.
Connectivity
Connectivity Features:
Very basic, primarily limited to standard automotive electrical connections. No Bluetooth or USB connectivity from factory.
🔧 Maintenance
Service Intervals
Oil Change:
Typically every 5,000-10,000 km or 6-12 months, depending on driving conditions. Refer to manual for exact recommendation.
Air Filter Replacement:
Every 15,000-30,000 km or as needed based on inspection.
Spark Plug Replacement:
Depending on plug type (copper, platinum, iridium), intervals can range from 30,000 km to 100,000 km.
Timing Belt Replacement:
Crucial maintenance item. For EF-series engines, typically 80,000-100,000 km or 5-7 years. Failure can cause catastrophic engine damage.
Fluid Specifications
Engine Oil:
API SG/SH/SJ or higher, viscosity grade SAE 10W-30 or 10W-40 is common. Check manual for specific approval and viscosity.
Coolant:
Ethylene glycol-based antifreeze, typically a 50/50 mix with distilled water. Long-life types may be specified. Manual will confirm.
Brake Fluid:
DOT 3 or DOT 4 glycol-based brake fluid.
Known Issues
Common Wear Items:
Clutch wear, suspension bushings, exhaust system corrosion, aging rubber hoses and seals.
Engine Idling Instability:
Can be due to dirty throttle body, vacuum leaks, or worn idle air control valve (IACV).
Oil Leaks:
Common from valve cover gasket, oil pan gasket, and crankshaft seals due to age.
Rust And Corrosion:
Areas like wheel arches, rocker panels, and floor pans are susceptible, especially in regions with road salt.
📚 Vehicle History
Brand Heritage
Daihatsu Focus:
Daihatsu has a long history of producing small, economical, and reliable vehicles, often catering to specific market needs for compact transportation.
Model Evolution
L700 Series Context:
The L701 is part of the L700 series, a significant generation for Daihatsu's small car offerings, representing a modern evolution of the Cuore/Mira lineage.
Platform Sharing:
Daihatsu's expertise in microcar technology allowed for efficient platform sharing and component reuse, contributing to affordability.
Production
Manufacturing Location:
Primarily Japan, with potential for assembly in other regions under license or for export markets.
🏆 Awards & Recognition
Recognitions
Awards:
While the L701 itself may not have specific widely publicized awards, Daihatsu vehicles of this era were often recognized for their value, fuel efficiency, and reliability in their respective segments.
Sale

Unavailable

Sold Out