您的购物车
😊 Product added to cart successfully
Product removed to cart successfully
1
/
/
2
BMW C1 125CC Service Repair Manual 1999 ONWARD
- 常规价格
- $16.99
- 促销价
- $16.99
- 常规价格
-
- 单价
- / 单价
🏷️ Basic Information Identification Make: BMW Model: C1 125 Model Variant: 125cc Scooter Applicable Model Years: 1999 onwards Codes Chassis Code: Not specified in product data, typically 'K' series for...
20 people are viewing this right now
类型: Motorcycle
厂商:
斯库: 549066
无法加载取货服务可用情况
共享
🏷️ Basic Information
Identification
Make:
BMW
Model:
C1 125
Model Variant:
125cc Scooter
Applicable Model Years:
1999 onwards
Codes
Chassis Code:
Not specified in product data, typically 'K' series for scooters
Engine Code:
Not specified in product data, likely a single-cylinder 4-stroke
👋 Introduction
Market Position
Positioning:
The BMW C1 was a unique urban scooter offering a high level of safety and comfort for its class, akin to a small car for urban mobility.
Competitive Analysis
Competitors:
Competed with other premium scooters and small-displacement motorcycles in the urban mobility segment, but its unique safety cage design set it apart.
Key Features
Unique Selling Points:
Integrated safety cage, optional seatbelt, weather protection, car-like driving position.
Manual Purpose
Purpose:
To provide owners and technicians with the necessary information to perform all maintenance, diagnostics, and repairs on the BMW C1 125.
📋 Manual Details
Coverage Areas
Coverage:
Comprehensive service and repair for BMW C1 125cc scooters from 1999 onwards.
Page Count
Page Count:
Not specified in product data, but described as 'highly detailed'.
Manual Type
Type:
Service Repair Workshop Manual
Language
Language:
English (presumed, standard for service manuals of this type)
Format
Format:
Factory Type PDF
📖 Manual Coverage
Systems Covered
Engine Mechanical:
Engine disassembly, assembly, inspection, timing, valve adjustment, piston, rings, crankshaft, connecting rod.
Engine Management:
Fuel injection system, ignition system, sensors, ECU diagnostics, emission control systems.
Cooling System:
Radiator, coolant, water pump, thermostat, hoses, fan.
Fuel System:
Fuel tank, fuel pump, fuel filter, fuel lines, fuel injector cleaning/replacement.
Exhaust System:
Exhaust manifold, muffler, catalytic converter, lambda sensors.
Transmission:
Automatic transmission (CVT), belt replacement, clutch inspection, variator service.
Brakes:
Hydraulic brake system, brake fluid, master cylinders, calipers, brake pads, brake discs, ABS (if equipped).
Suspension:
Front forks, rear shock absorber, linkage, bearings, seal replacement.
Steering:
Handlebar assembly, steering stem, bearings, adjustments.
Electrical System:
Battery, charging system (alternator/stator, regulator/rectifier), starter motor, lighting, horn, wiring diagrams.
Bodywork And Frame:
Panel removal and installation, seat, fairings, chassis inspection, structural repairs.
Wheels And Tires:
Tire replacement, wheel balancing, bearing maintenance, rim inspection.
Procedures Included
Preventative Maintenance:
Oil changes, filter replacements, spark plug service, chain/belt adjustments, brake checks.
Troubleshooting:
Diagnostic procedures for common problems, fault code interpretation (if applicable).
Repair Procedures:
Step-by-step instructions for all major mechanical and electrical repairs.
Rebuilding:
Engine and transmission rebuilding procedures.
Diagnostic Charts:
Flowcharts for diagnosing specific issues.
Wiring Diagrams:
Detailed electrical schematics for all systems.
Technical Depth
Depth:
Comprehensive, covering everything from basic fluid checks to complete engine overhauls and advanced electrical diagnostics.
📊 Manual Specifications
File Format
Format:
PDF (Portable Document Format)
Searchable:
Likely searchable text within the PDF (standard for factory manuals).
Print Quality
Quality:
Factory type, implies high resolution for clear diagrams and text.
Binding Type
Binding:
N/A (Digital PDF format)
Paper Type
Paper Type:
N/A (Digital PDF format)
⚙️ Engine Specifications
Primary Engine
Type:
Four-stroke single-cylinder engine.
Displacement:
125 cc (Cubic Centimeters).
Bore X Stroke:
Not specified in product data, typically around 52mm x 50mm for 125cc BMW engines of this era.
Compression Ratio:
Not specified in product data.
Cooling System:
Liquid-cooled.
Performance
Horsepower:
Approximately 15 HP (Horsepower) at around 7500 RPM (typical for this class).
Torque:
Approximately 12 Nm (Newton-meters) at around 6000 RPM (typical for this class).
Fuel System
Induction:
Electronic Fuel Injection (EFI).
Fuel Type:
Unleaded gasoline (Petrol), minimum Octane rating typically 95 RON.
Fuel Tank Capacity:
Approximately 9-10 Liters.
🔧 Transmission
Standard
Type:
Automatic Continuously Variable Transmission (CVT).
Optional
Optional Transmission:
N/A (CVT was standard).
Features
Drive Type:
Belt drive to rear wheel.
Fluid Type:
Specific CVT transmission fluid (e.g., SAE 75W-90 or similar, refer to manual for exact specification).
📐 Dimensions
Exterior
Length:
Approx. 2000 mm.
Width:
Approx. 700 mm (excluding mirrors).
Height:
Approx. 1300 mm (to top of windshield/cage).
Weights
Dry Weight:
Approx. 160-180 kg (depending on equipment).
Gross Vehicle Weight Rating:
Not specified in product data, typically around 300-320 kg.
🛡️ Safety Features
Ratings
Crash Protection:
Designed with a safety cell (roll cage structure) providing superior protection compared to conventional scooters. Mentioned optional seatbelt.
Active Features
Braking System:
Front and rear disc brakes. Optional ABS (Anti-lock Braking System) was available on some models.
Passive Features
Occupant Protection:
Integrated safety cage, deformable front section, potential for airbag deployment on certain configurations.
Lighting:
Headlight, taillight, brake lights, turn signals.
💡 Technology Features
Infotainment
Features:
Basic instrumentation: speedometer, tachometer, fuel gauge, temperature gauge. No advanced infotainment systems were typically fitted.
Driver Assistance
ABS:
Optional ABS system available on some models, a significant technological feature for scooters of that era.
Connectivity
Features:
N/A (No modern connectivity features like Bluetooth or app integration).
🔧 Maintenance
Service Intervals
Oil Change Interval:
Every 5,000 - 10,000 km or annually (refer to specific manual for exact interval and conditions).
Spark Plug Replacement:
Typically every 10,000 - 15,000 km.
Belt Replacement:
Recommended every 20,000 - 30,000 km, inspection at shorter intervals.
Fluid Specifications
Engine Oil Type:
Fully synthetic motorcycle engine oil, SAE 10W-40 or 15W-50 (API SG or higher, JASO MA/MA2).
Engine Oil Capacity:
Approximately 1.3 - 1.5 Liters (with filter change).
Coolant Type:
Ethylene glycol-based coolant with corrosion inhibitors (BMW recommends specific formulations).
Brake Fluid Type:
DOT 4 high-performance brake fluid.
Known Issues
Common Problems:
Potential for variator pulley wear, electrical connector corrosion, thermostat issues, and aging fuel lines.
Maintenance Considerations:
Due to its unique design, specific attention to the safety cage structure and its associated components is necessary.
📚 Vehicle History
Brand Heritage
Heritage:
BMW Motorrad has a long history of producing innovative and high-quality motorcycles and scooters since the early 20th century.
Model Evolution
C1 Introduction:
The BMW C1 was first introduced in 2000, with the 125cc model being a key variant for European markets requiring lower licensing requirements.
Design Philosophy:
Developed to address urban commuting safety concerns and provide a weather-protected, agile alternative to cars and conventional scooters.
Production
Production Period:
Produced from 2000 to 2003.
Manufacturing Location:
Primarily manufactured in Italy by a BMW subsidiary or partner.
🏆 Awards & Recognition
Recognitions
Awards:
The C1 received accolades for its innovative safety features and urban commuter concept, though market acceptance was varied.
Ratings
Safety Ratings:
Demonstrated significantly higher crash test safety performance compared to conventional scooters due to its safety cell.