Primary Coverage:
Comprehensive workshop service and repair
Engine Coverage:
Full engine overhaul, diagnostics, and tuning
Transmission Coverage:
Automatic transmission service and repair
Drivetrain Coverage:
Transfer box, drive shafts, final drive
Suspension Steering Coverage:
Front and rear suspension, steering system components
Braking System Coverage:
Hydraulic and mechanical brake system diagnostics and repair
Electrical System Coverage:
Charging, starting, lighting, body control unit, data buses
Body And Interior Coverage:
Doors, interior trim, seats, sunroof, windows, wipers/washers
HVAC Coverage:
Air conditioning system service and repair
Safety Features Coverage:
Restraint systems (airbags, seatbelts), security systems
Infotainment Coverage:
Entertainment and information systems
Driver Assistance Coverage:
Driving aids
Estimated Page Count:
Likely over 1000 pages (typical for comprehensive factory manuals)
Type:
Factory Workshop Service Repair Manual
Format:
Digital Download (implied by 'FAST DOWNLOAD')
Engine Management:
Engine Management System (ECU, sensors, actuators)
Fuel Delivery:
Fuel Delivery System (pump, injectors, lines)
Cooling:
Cooling System (radiator, thermostat, water pump)
Exhaust:
Manifolds and Exhaust System
Transfer Case:
Transfer Box (viscous coupling unit, differentials)
Propeller Shafts:
Drive and Propeller Shafts (CV joints, U-joints)
Final Drive:
Final Drive (differentials, axles)
Steering Components:
Steering (rack and pinion, power steering pump)
Suspension Components:
Suspension (struts, shocks, bushings, linkages)
Brake System Components:
Brakes (discs, pads, calipers, ABS)
Restraint Systems:
Restraint Systems (airbags, seat belts, SRS module)
Door Mechanisms:
Doors (latches, locks, regulators, exterior panels)
Interior Trim:
Interior Trim Components (panels, dashboard, console)
Seat Mechanisms:
Seats (adjustment, heating, airbags)
Sunroof Operation:
Sunroof (motors, tracks, switches)
Air Conditioning System:
Air Conditioning (compressor, refrigerant, controls)
Wipers Washers:
Wipers and Washers (motors, blades, fluid system)
Charging Starting:
Charging and Starting (alternator, starter motor, battery)
Lighting System:
Lighting (headlights, taillights, interior lighting, wiring)
Body Control Module:
Body Control Unit (BCU functions and diagnostics)
Communication Buses:
Communication Data Buses (CAN, LIN protocols)
Security System:
Security (alarms, immobilizer, central locking)
Window Mechanisms:
Windows (power regulators, switches)
Entertainment Info:
Entertainment and Information Systems (audio, navigation)
Driver Aids:
Driving Aids (ABS, traction control, hill descent control if applicable)
Instruments:
Instruments (gauges, warning lights, dashboard cluster)
Maintenance Procedures:
Scheduled maintenance, fluid changes, filter replacements
Diagnostic Procedures:
Troubleshooting guides, fault code interpretation, symptom-based diagnosis
Repair Procedures:
Step-by-step repair instructions for all covered systems
Overhaul Procedures:
Engine and transmission overhaul procedures
Removal Installation:
Removal and installation of major components and sub-assemblies
Adjustment Calibration:
Adjustment and calibration procedures (e.g., throttle body, sensors)
Electrical Wiring Diagrams:
Comprehensive electrical wiring diagrams
Depth:
Factory-level technical detail suitable for professional technicians and advanced DIYers
Diagnostics Level:
In-depth diagnostics, including electrical system troubleshooting and ECU data interpretation
Specifications Data:
Detailed torque specifications, clearances, fluid capacities, and electrical values
Length Approx:
4,160 - 4,185 mm (163.8 - 164.8 inches)
Width Approx:
1,785 - 1,800 mm (70.3 - 70.9 inches)
Height Approx:
1,745 - 1,780 mm (68.7 - 70.1 inches)
Curb Weight Range Approx:
1,450 - 1,600 kg (3,197 - 3,527 lbs)
Towing Capacity Approx:
1,500 - 2,000 kg (3,307 - 4,409 lbs) (Varies by engine/market)
Oil Change Interval:
Typically 10,000 miles or 12 months, whichever comes first (refer to manual for exact specification)
Timing Belt Interval:
For K-series engines with timing belts, replacement is critical. Check manual for specific mileage (e.g., 60,000-80,000 miles) or time intervals.
Transmission Fluid Interval:
Automatic transmission fluid change recommended every 30,000-50,000 miles (refer to manual)
Engine Oil Specification:
Refer to manual for specific viscosity grade (e.g., 5W-30, 10W-40) and API/ACEA specifications.
Coolant Specification:
Ethylene Glycol-based coolant, typically a 50/50 mix with distilled water. Refer to manual for specific type (e.g., OAT or HOAT).
Brake Fluid Specification:
DOT 3 or DOT 4 brake fluid
Transmission Fluid Specification Automatic:
Refer to manual for specific ATF specification (e.g., ATF T-IV, Dexron III/VI equivalent)
K Series Head Gasket:
The K-series engines are known for potential head gasket failures, especially if cooling system maintenance is neglected. The manual will detail inspection and replacement procedures.
Vcu Failure:
The Viscous Coupling Unit (VCU) in the transfer box can fail due to overheating or wear, leading to poor 4WD performance. Manual covers inspection and replacement.
ABS Sensors:
ABS wheel speed sensors can be prone to failure or contamination, affecting ABS and traction control operation. Manual provides diagnostic steps.
Body Control Module Issues:
BCU can experience issues affecting various electronic functions; manual details diagnostics and potential reset procedures.