Engine Mechanical:
Detailed repair procedures, specifications, and troubleshooting for all engine variants.
Engine Performance:
Engine tuning, diagnostics, and performance adjustments.
Fuel System:
Fuel injection, pumps, injectors, lines, and evaporative emissions control.
Ignition System:
Spark plugs, coils, ignition control modules, and timing.
Cooling System:
Radiator, water pump, thermostat, hoses, and fan operation.
Exhaust System:
Catalytic converter, mufflers, pipes, and emissions controls.
Transmission Automatic:
Overhaul, repair, torque converter, and electronic controls for automatic transmissions.
Transmission Manual:
If applicable, repair and specifications for manual transmissions.
Drivetrain:
Axles, driveshafts, CV joints, and differential components.
Suspension System:
Front and rear suspension, shock absorbers, struts, control arms, and alignment specifications.
Steering System:
Power steering pump, rack and pinion, tie rods, and steering column.
Brake System:
Hydraulic system, ABS, calipers, rotors, pads, lines, and bleeding procedures.
Wheel And Tire:
Wheel specifications, tire sizes, and rotation recommendations.
Body Exterior:
Body panels, doors, latches, hinges, glass, and exterior trim.
Body Interior:
Seats, dashboard, trim panels, carpeting, and climate control components.
Electrical System:
Battery, charging system, starter, lighting, and accessory circuits.
Lighting System:
Headlights, taillights, interior lights, and bulb types.
Instrumentation And Gages:
Dashboard gauges, warning lights, and sensor diagnostics.
Audio And Navigation:
Radio, speakers, and navigation system (if equipped) repair and diagnostics.
Climate Control System:
HVAC system, A/C, heater core, blower motor, and refrigerant handling.
Safety Systems:
Airbags, seatbelts, and related component diagnostics.
Engine Control Module:
ECM/PCM diagnostic procedures, sensor inputs, and output commands.
Anti Lock Braking System:
ABS module, wheel speed sensors, and hydraulic modulator troubleshooting.
Traction Control System:
TCS operation, diagnostics, and component testing.
Routine Maintenance:
Oil changes, filter replacements, fluid checks, and lubrication.
Scheduled Maintenance:
Detailed schedules for inspections, replacements, and servicing at specified intervals.
Troubleshooting:
Systematic diagnostic procedures for identifying and resolving common and complex issues.
Repair Procedures:
Step-by-step instructions for disassembling, repairing, and reassembling all major vehicle components.
Diagnostic Trouble Codes:
Explanation of DTCs, their potential causes, and recommended diagnostic steps.
Wiring Diagrams:
Comprehensive electrical schematics for all vehicle systems.
Component Testing:
Instructions for testing individual components using multimeters and specialized tools.
Specifications And Tolerances:
All essential technical data, torque values, clearances, and measurements.
Torquing Procedures:
Correct torque specifications for all fasteners, from engine bolts to wheel nuts.
Rebuilding Procedures:
Detailed instructions for rebuilding major components like engines and transmissions.
Body Repair:
Procedures for dent repair, panel replacement, and structural integrity checks.
Depth:
Comprehensive and in-depth, covering everything from basic maintenance to full engine/transmission overhauls and advanced diagnostics.
Diagnostics:
Advanced diagnostic procedures using scan tools and live data interpretation.
Wiring Schematics Detail:
High-resolution, clear wiring diagrams for all electrical systems.
Oil Change Interval:
Every 3,000-7,500 miles or 3-6 months, depending on oil type and driving conditions (consult manual for specific recommendation).
Air Filter Replacement:
Every 12,000-15,000 miles or annually.
Spark Plug Replacement:
Approximately 60,000-100,000 miles for platinum-tipped plugs, depending on engine.
Transmission Fluid Service:
Every 30,000-60,000 miles (recommended flush/change).
Coolant Flush:
Every 30,000-50,000 miles or every 2-3 years.
Engine Oil Type:
API Certified SAE 5W-30 or 10W-30 (check owner's manual for specific viscosity based on temperature range).
Engine Oil Capacity:
Approximately 4.5 - 5.0 quarts (with filter) for V6 engines.
Power Steering Fluid:
Mopar Power Steering Fluid or equivalent (ATF+4 may be specified for some).
Brake Fluid Type:
DOT 3 or DOT 4.
Coolant Type:
Chrysler HOAT (Hybrid Organic Acid Technology) 50/50 mixture with distilled water.
Common Problems Engine:
Head gasket leaks (especially on earlier 3.3L V6), intake manifold gasket leaks, oil filter housing leaks.
Common Problems Transmission:
Torque converter shudder or failure, transmission fluid leaks.
Common Problems Suspension:
Worn control arm bushings, ball joints, and tie rod ends; premature strut/shock absorber wear.
Common Problems Electrical:
Faulty power window motors, door lock actuators, blower motor resistor, and instrument cluster issues.
Common Problems HVAC:
A/C compressor failure, evaporator core leaks, blend door actuator failures.
Common Problems Body:
Rust on rocker panels, wheel wells, and rear quarter panels; sliding door track issues.
