Engine Mechanical:
Comprehensive engine removal, installation, disassembly, inspection, and reassembly of all components, including the cylinder block, cylinder head, pistons, crankshaft, camshafts, valves, timing system.
Fuel System:
Fuel injection system diagnostics, fuel pump, fuel injectors, fuel filter, fuel lines, evaporative emission control (EVAP) system.
Lubrication And Cooling:
Oil pump, oil filter, oil pan, oil cooler (if equipped), radiator, water pump, thermostat, coolant passages, cooling fan.
Intake And Exhaust:
Intake manifold, throttle body, exhaust manifold, catalytic converter, muffler, exhaust pipes, emission control systems.
Engine Electrical:
Ignition system (spark plugs, coils, wiring), starting system (starter motor, solenoid), charging system (alternator, voltage regulator), engine control module (ECM) wiring diagrams, sensors (crankshaft position, camshaft position, throttle position, MAF, O2).
Transmission Manual:
Manual transmission removal, installation, internal component inspection, gear shift mechanism, clutch operation, clutch disc, pressure plate, flywheel.
Drive Train:
Driveshaft, differential, rear axle, wheel bearings, CV joints (if applicable).
Steering:
Power steering system, steering rack, power steering pump, fluid, steering column, linkage.
Suspension:
Front and rear suspension components, shock absorbers, springs, control arms, ball joints, sway bars, bushings, alignment specifications.
Brakes:
Front and rear brake systems, brake discs, brake pads, calipers, master cylinder, brake lines, brake fluid, ABS system diagnostics (if equipped).
Bodywork And Exterior:
Body panel removal and installation, doors, hood, trunk lid, bumpers, convertible top mechanism, trim pieces, glass replacement.
Interior:
Dashboard removal, seats, interior trim panels, carpeting, HVAC controls, audio system.
Electrical System General:
Battery, charging system, lighting system (headlights, taillights, interior lights), fuses, relays, wiring harnesses, diagnostic trouble codes (DTCs).
Climate Control:
HVAC system operation, blower motor, evaporator, condenser, refrigerant, A/C controls.
Routine Maintenance:
Oil and filter changes, air filter replacement, spark plug replacement, coolant flush, brake fluid flush, differential fluid change, transmission fluid change, tire rotation.
Troubleshooting:
Diagnostic procedures for common problems, symptom-based troubleshooting guides, interpretation of diagnostic trouble codes (DTCs).
Repair Procedures:
Step-by-step instructions for major component repairs and replacements, including engine, transmission, brakes, suspension, and electrical systems.
Installation:
Procedures for installing replacement parts and accessories.
Depth Of Coverage:
Covers basic maintenance to complete engine and transmission overhauls, including detailed diagnostic information and component specifications.
Oil Change Interval:
Every 5,000 miles or 6 months (whichever comes first), using synthetic oil recommended.
Spark Plug Replacement:
Approx. 60,000 miles (OEM recommendations may vary; iridium plugs recommended for longevity).
Coolant Flush:
Every 2 years or 30,000 miles.
Engine Oil Type:
API SG, SH, or SJ certified SAE 5W-30 or 10W-30 (synthetic recommended).
Engine Oil Capacity:
4.2 US quarts (4.0 liters) with filter change.
Coolant Type:
Mazda/Motorcraft Orange Antifreeze/Coolant (50/50 mix with distilled water).
Transmission Fluid Type Manual:
GL-4 SAE 75W-90 Gear Oil.
Brake Fluid Type:
DOT 3 or DOT 4.
Oil Consumption:
Some engines may experience increased oil consumption with age, particularly if not maintained properly.
Rear Main Seal Leaks:
Can develop leaks over time, requiring transmission removal for replacement.
Soft Top Wear:
The vinyl rear window can yellow or crack; fabric tops require cleaning and conditioning.
Rust Prone Areas:
Rocker panels, wheel wells, and frame rails can be susceptible to rust, especially in regions with harsh winters or coastal environments.
Alternator Failure:
Alternators can be a common failure point, especially with high mileage.
