Engine Mechanical:
Engine assembly, disassembly, cylinder head, block, pistons, crankshaft, camshafts, valve train.
Engine Fuel System:
Fuel injection system (MPI), fuel pump, injectors, fuel pressure regulator, fuel filter replacement.
Engine Ignition System:
Ignition coils, spark plugs, crank angle sensor, camshaft position sensor, ignition timing.
Engine Cooling System:
Radiator, water pump, thermostat, coolant hoses, fan system, troubleshooting overheating.
Engine Lubrication System:
Oil pump, oil filter, oil pan, oil pressure monitoring, oil cooler (if equipped).
Forced Induction:
Turbocharger (TD05H-16G), intercooler, boost control system, wastegate, blow-off valve.
Exhaust System:
Exhaust manifold, catalytic converter, mufflers, exhaust sensors (O2).
Transmission Manual:
5-speed and 6-speed (RS models) manual transmission, clutch system, gearbox overhaul, gear ratios.
Transmission AWD:
Advanced All-Wheel Control (AWC) system, Active Center Differential (ACD), electronically controlled viscous coupling (VCU), rear differential.
Suspension Front:
MacPherson strut, control arms, anti-roll bar, steering knuckle, wheel bearing replacement.
Suspension Rear:
Multi-link independent suspension, trailing arms, shock absorbers, springs, alignment specifications.
Brakes Front:
Brembo 4-piston calipers, vented rotors, brake pad replacement, caliper service.
Brakes Rear:
Brembo 2-piston calipers, vented rotors, brake pad replacement, caliper service.
Steering System:
Power steering system, steering rack, tie rod ends, steering column, alignment procedures.
Electrical System:
Battery, charging system (alternator), starter motor, lighting system, wiring diagrams.
ECU Tuning Diagnostics:
Engine Control Unit (ECU) diagnostics, sensor data interpretation, fault codes (DTCs) and troubleshooting charts.
Body Exterior:
Body panels, doors, hood, trunk, bumpers, trim, glass replacement.
Body Interior:
Seats, dashboard, center console, door panels, headliner, carpet replacement.
Climate Control:
HVAC system, air conditioning (A/C) compressor, refrigerant, heater core, blower motor, climate control module.
Safety Systems:
Airbag system, SRS (Supplemental Restraint System) components and diagnostics, seat belts.
Routine Maintenance:
Oil and filter change, air filter replacement, fuel filter replacement, spark plug replacement, coolant flush, brake fluid flush.
Troubleshooting:
Diagnostic procedures for all major systems, fault code interpretation, step-by-step troubleshooting flowcharts.
Major Repairs:
Engine rebuilds, transmission overhauls, turbocharger replacement, suspension component replacement, brake system service.
Component Replacement:
Detailed instructions for replacing individual parts and assemblies across all vehicle systems.
Electrical Diagnostics:
Wiring diagrams for all circuits, troubleshooting electrical faults, component testing.
Suspension Alignment:
Front and rear wheel alignment specifications and adjustment procedures.
A C Service:
Refrigerant handling, leak detection, component replacement, system evacuation and charging.
Body Work:
Panel removal and installation, door adjustment, glass replacement.
Depth Level:
Comprehensive - covers everything from basic maintenance to complete engine and transmission rebuilds.
Diagnostic Tools:
Information on diagnostic trouble codes (DTCs) and sensor readings, implying use of scan tools.
Torque Specifications:
Detailed torque values for all fasteners and critical components.
Clearances Tolerances:
Specific engine and mechanical clearances and tolerances for assembly.
Oil Change Interval:
Every 3,750 miles or 6 months, whichever comes first (severe use).
Spark Plug Replacement:
60,000 miles
Timing Belt Replacement:
60,000 miles (or per manual recommendation, critical component)
Engine Oil:
API SG or SH, SAE 5W-30 or 10W-30 (check manual for specific viscosity based on temperature)
Coolant:
Mitsubishi DiaQueen Super Long Life Coolant (Green) or equivalent ethylene glycol-based coolant.
Brake Fluid:
DOT 3 or DOT 4
Transmission Fluid Manual:
API GL-4, SAE 75W-85 or 75W-90 (specific Mitsubishi specs).
Transfer Case Fluid:
API GL-5, SAE 75W-90 (specific Mitsubishi specs).
Rear Differential Fluid:
API GL-5, SAE 75W-90 (specific Mitsubishi specs).
Engine Oil Consumption:
Some models can exhibit increased oil consumption, particularly if driven hard or poorly maintained. Monitor oil levels diligently.
Clutch Wear:
Performance driving can lead to premature clutch wear. Regular inspection and maintenance are key.
Ayc Pump Failure:
The AYC pump can fail over time, affecting the active yaw control system. Proper fluid maintenance is important.
Turbocharger Maintenance:
Requires proper warm-up and cool-down cycles to prevent premature turbo failure. Regular oil changes are critical.