Engine Mechanical:
Complete overhaul procedures for the 2.4L DOHC engine, including cylinder head, block, pistons, connecting rods, crankshaft, timing system (belt/chain, tensioners, guides), valve train (camshafts, lifters, valves, springs).
Engine Management:
ECM/PCM operation, sensor inputs (MAP, TPS, O2, ECT, CKP, CMP), actuator outputs (injectors, ignition coils, EVAP canister purge valve, EGR valve), fuel injection strategies, emissions control systems, diagnostic trouble codes (DTCs), powertrain control module (PCM) diagnosis.
Fuel System:
Fuel pump operation, fuel filter replacement, fuel pressure testing, fuel injectors (diagnosis, cleaning, replacement), fuel tank and lines, EVAP system diagnosis.
Cooling System:
Radiator, water pump, thermostat, coolant hoses, cooling fan operation, coolant capacity and type, system pressure testing.
Lubrication System:
Oil pump, oil pan, oil filter replacement, oil pressure testing, oil type and capacity.
Exhaust System:
Exhaust manifold, catalytic converter, muffler, oxygen sensors, exhaust gas recirculation (EGR) system.
Ignition System:
Spark plugs, ignition coils, ignition timing, dwell angle (if applicable), coil-on-plug (COP) system diagnosis.
Starting Charging:
Starter motor operation, battery testing, alternator output testing, charging system diagnosis.
Transmission:
Operation of the automatic transmission (likely a 4-speed or 5-speed depending on specific configuration), fluid type and capacity, filter replacement, torque converter operation, gear shift control, transmission control module (TCM) diagnosis, manual transmission overhaul (if applicable).
Driveline:
Front-wheel drive (FWD) components, CV axles, differential, wheel bearings.
Suspension:
MacPherson struts, control arms, ball joints, sway bars, bushings, wheel alignment specifications.
Steering:
Power steering system (hydraulic or electric), steering column, tie rods, rack and pinion assembly, steering angle sensor.
Brakes:
Front and rear disc brakes, ABS system operation, brake fluid type and bleeding procedures, parking brake system.
Body Electrical:
Lighting systems (headlights, taillights, interior lights), power windows, power locks, mirrors, wipers, horn, fuse box locations and functions, relay functions, body control module (BCM) functions.
HVAC:
Air conditioning system operation, refrigerant type, compressor, evaporator, condenser, heater core, blower motor, cabin air filter replacement, climate control system diagnosis.
Interior Exterior:
Removal and installation of interior panels, seats, dashboard components, exterior body panels, bumpers, doors, liftgate.
Diagnostics Troubleshooting:
Systematic diagnostic procedures, symptom-based troubleshooting guides, flowcharts, use of diagnostic scan tools, interpretation of live data.
Maintenance:
Scheduled maintenance tasks, oil and filter changes, air filter replacement, spark plug replacement, coolant flushes, brake fluid changes, transmission fluid and filter changes, cabin air filter replacement.
Repair:
Detailed step-by-step instructions for component removal, repair, and reinstallation. Examples include engine rebuilds, transmission overhaul, suspension component replacement, brake caliper replacement, electrical component repair.
Troubleshooting:
Diagnostic flowcharts and symptom-based troubleshooting guides for various issues, including engine performance problems, electrical faults, HVAC issues, and drivability concerns.
Diagnostics:
Procedures for using diagnostic scan tools to read and clear diagnostic trouble codes (DTCs), monitor live data streams, and perform actuator tests.
Specifications:
Torque specifications for all fasteners, critical clearance measurements, electrical component resistance values, and fluid capacities.
Wiring Diagrams:
Comprehensive electrical wiring diagrams for all vehicle systems, including power distribution, grounds, sensor inputs, actuator outputs, and diagnostic connector pinouts.
Depth:
Comprehensive, covering basic maintenance to complete engine and transmission rebuilds, including in-depth diagnostics and component-level repair.
Oil Change Interval:
Typically every 5,000 - 7,500 miles (8,000 - 12,000 km) or 6-12 months, whichever comes first. Consult manual for specific recommendation.
Air Filter Replacement:
Every 15,000 - 30,000 miles (24,000 - 48,000 km), or as needed based on driving conditions.
Spark Plug Replacement:
Typically every 60,000 - 100,000 miles (96,000 - 160,000 km) for iridium or platinum plugs. Consult manual for type and interval.
Coolant Replacement:
Every 30,000 - 60,000 miles (48,000 - 96,000 km) or 2-4 years. Consult manual for specific coolant type and interval.
Transmission Fluid Change:
Every 30,000 - 60,000 miles (48,000 - 96,000 km). Manual specifies procedures and fluid type.
Engine Oil Type:
API SM or SN, ILSAC GF-4 or GF-5. Viscosity SAE 5W-20 or 5W-30 (check owner's manual for precise recommendation).
Engine Oil Capacity:
Approximately 4.5 - 4.8 quarts (4.3 - 4.6 liters) with filter change.
Coolant Type:
Ethylene glycol-based coolant with deionized water. Typically a long-life coolant (e.g., orange or pink).
Transmission Fluid Type:
SP-III (for automatic transmissions) or appropriate gear oil for manual transmissions. Consult manual for exact specification.
Brake Fluid Type:
DOT 3 or DOT 4.
Engine Issues:
Potential for oil consumption in higher mileage units, occasional issues with the crank position sensor, PCV system clogging.
Transmission Issues:
Some reports of rough shifting or delayed engagement in automatic transmissions, typically related to fluid condition or solenoids.
Suspension Issues:
Wear of front control arm bushings and ball joints, leading to clunking noises and alignment issues.
Electrical Issues:
Intermittent issues with power window motors or switches, occasional failure of the body control module (BCM).
HVAC Issues:
Compressor clutch failure, leaks in the AC system, blower motor resistor failure.