Mazda Speed 3 2010 2 261 cc I4 turbo Service Repair Manual

常规价格: $17.99
促销价: $17.99
常规价格
单价: 单价

🏷️ Basic Information Identification Make: Mazda Model: MazdaSpeed 3 Year: 2010 Chassis Code: BK Engine Code: L3-VDT 👋 Introduction Market Position Market Segment: Compact performance hatchback (hot hatch). Target Audience:...

18 people are viewing this right now

类型: Car

斯库: 91975

标签: 2010 Car Cars Mazda Misc Speed 3

产品多属性

Description

🏷️ Basic Information

Identification

Make:

Mazda

Model:

MazdaSpeed 3

Year:

Chassis Code:

Engine Code:

L3-VDT

👋 Introduction

Market Position

Market Segment:

Compact performance hatchback (hot hatch).

Target Audience:

Enthusiast drivers, performance car owners, DIY mechanics.

Competitive Analysis

Key Competitors:

Volkswagen GTI, Subaru WRX, Mitsubishi Lancer Ralliart, Honda Civic Si.

Key Features

Performance Focus:

Emphasizes the sporty nature and high-performance tuning capabilities of the MazdaSpeed 3.

Technical Accuracy:

Provides manufacturer-sourced technical data for accurate repairs and maintenance.

📋 Manual Details

Coverage Areas

Manual Type:

Service and Repair Manual

Language:

English

Format:

Digital (likely PDF, based on description)

Page Count:

Not specified in product description, but typically 1000+ pages for a comprehensive service manual.

📖 Manual Coverage

Systems Covered

Engine Mechanical:

Complete overhaul, assembly, disassembly, cylinder head, block, pistons, connecting rods, crankshaft, lubrication system, cooling system.

Engine Performance:

Turbocharger system, fuel injection, ignition system, emissions control systems (catalytic converter, EVAP).

Transmission Manual:

Disassembly, assembly, clutch, gearshift mechanism, torque specifications.

Transmission Automatic:

Not applicable for this model/trim (Speed 3 is typically manual only).

Drivetrain:

Front-wheel drive system, CV joints, driveshafts, differential.

Suspension:

Front and rear suspension components, struts, shock absorbers, control arms, bushings, alignment specifications.

Steering:

Power steering system, steering rack, tie rods, column, hydraulic components.

Brakes:

Front and rear brake systems (disc brakes), ABS, EBD, brake fluid specifications, bleeding procedures, caliper and rotor replacement.

Electrical System:

Battery, charging system (alternator), starting system, wiring diagrams, fuses, relays, lighting systems.

Electronics Controls:

ECU, sensors (MAP, MAF, O2, etc.), actuators, immobilizer system, keyless entry.

Body Exterior:

Body panels, doors, hood, trunk, bumpers, glass, seals, exterior trim, paint repair.

Body Interior:

Dashboard, seats, upholstery, door panels, trim, carpets, HVAC system components, SRS airbag system.

Procedures Included

Scheduled Maintenance:

Oil changes, filter replacements, fluid checks and top-offs, spark plug replacement, belt inspections.

Troubleshooting:

Diagnostic trouble codes (DTCs), common symptoms and causes, guided fault finding.

Repair Procedures:

Step-by-step instructions for component removal, replacement, and reassembly.

Diagnostics:

On-Board Diagnostics (OBD-II) system operation, sensor testing, component function tests.

Specifications Data:

Torque values, clearances, pressures, electrical resistance, fluid capacities.

Wiring Diagrams:

Detailed electrical circuit diagrams for all major systems.

Technical Depth

Depth Level:

Comprehensive: Covers basic maintenance to complex component overhauls and diagnostics.

Diagnostics Capability:

Advanced: Includes guidance on using diagnostic tools and interpreting sensor data.

Repair Complexity:

Suitable for DIY enthusiasts with mechanical aptitude and professional technicians.

📊 Manual Specifications

File Format

File Type:

Likely PDF

Searchability:

Assumed to be text-searchable if a digital format.

Print Quality

Illustrations:

Typically includes high-quality diagrams, illustrations, and photographs.

Binding Type

Binding:

If printed: Spiral-bound or perfect-bound for durability.

Paper Type

Paper Quality:

If printed: High-quality, durable paper suitable for workshop environments.

⚙️ Engine Specifications

Primary Engine

Engine Type:

Inline 4-cylinder, turbocharged, DOHC, 16-valve.

Displacement:

2.3 L (2261 cc)

Bore X Stroke:

87.5 mm x 94.0 mm

Compression Ratio:

8.5:1

Fuel Delivery:

Sequential Electronic Fuel Injection (SFI) / Direct Injection (DI) - *Confirm specific system for 2010 model.*

Turbocharger:

Garrett GT2560R (or similar, depending on exact spec) with intercooler.

Performance

Horsepower:

263 hp @ 5500 rpm

Torque:

280 lb-ft @ 3000 rpm

Redline:

Approx. 6700 rpm

Fuel System

Recommended Fuel:

Premium Unleaded Gasoline (91+ octane)

Fuel Tank Capacity:

15.5 gallons (58.7 liters)

🔧 Transmission

Standard

Type:

6-speed Manual Transmission

Optional

Type:

Not available

Features

Limited Slip Differential:

Standard (Helical Type)

Transmission Fluid Type:

Mazda GL-4 SAE 75W-90 Gear Oil (or equivalent)

Transmission Fluid Capacity:

Approx. 2.3 liters (check manual for exact specification)

📐 Dimensions

Exterior

Length:

177.1 inches (4498 mm)

Width:

70.1 inches (1780 mm)

Height:

57.7 inches (1465 mm)

Wheelbase:

104.3 inches (2650 mm)

Front Track:

60.6 inches (1539 mm)

Rear Track:

60.4 inches (1534 mm)

Weights

Curb Weight:

Approx. 3,200 - 3,250 lbs (1451 - 1474 kg)

Gross Vehicle Weight Rating:

Not specified, but typically around 4300 lbs.

Cargo

Cargo Volume Rear Seats Up:

Approx. 15.1 cu ft (428 liters)

Cargo Volume Rear Seats Down:

Approx. 42.8 cu ft (1212 liters) with rear seats folded.

🛡️ Safety Features

Ratings

NHTSA Overall Rating:

Not explicitly available for all model years, but generally good ratings for its class.

IIHS Front Crash Rating:

IIHS Side Impact Rating:

IIHS Roof Strength Rating:

Active Features

Standard, 4-wheel disc brakes with ABS.

Electronic Brake-force Distribution.

Traction Control:

Standard, Dynamic Stability Control (DSC) with Traction Control System (TCS).

Passive Features

Airbags:

Front airbags, front side-impact airbags, side curtain airbags.

Seatbelts:

3-point front and rear seatbelts with pretensioners and load limiters.

Tire Pressure Monitoring:

Standard (TPMS).

💡 Technology Features

Infotainment

Audio System:

Bose premium audio system (optional), CD/MP3 player, AM/FM radio.

Connectivity:

Auxiliary audio input jack, optional SiriusXM Satellite Radio.

Navigation:

Optional GPS Navigation system.

Driver Assistance

Cruise Control:

Standard.

Keyless Entry:

Standard.

Automatic Climate Control:

Optional.

🔧 Maintenance

Service Intervals

Oil Change Interval:

Every 5,000 miles (8,000 km) or 6 months, whichever comes first, or every 7,500 miles with synthetic oil and filter.

Air Filter Replacement:

Inspect every 15,000 miles (24,000 km), replace as needed.

Cabin Air Filter:

Replace every 15,000 miles (24,000 km) or annually.

Spark Plug Replacement:

Approximately every 75,000 miles (120,000 km) for iridium-tipped plugs.

Coolant Flush:

First flush at 100,000 miles (160,000 km), then every 50,000 miles (80,000 km).

Fluid Specifications

Engine Oil:

SAE 5W-30 Synthetic (API SN or higher, ILSAC GF-5 or higher)

Engine Oil Capacity:

5.0 US quarts (4.7 liters) with filter change.

Coolant:

Mazda Genuine Super Long Life Coolant (Blue) or equivalent (50/50 mixture).

Brake Fluid:

DOT 3 or DOT 4

Power Steering Fluid:

Mazda Genuine Power Steering Fluid (or equivalent Dexron III ATF for older models, verify for 2010)

Known Issues

Engine Pinging Detonation:

Can occur under heavy load if low octane fuel is used or carbon buildup exists. Manual addresses ECU tuning and intake cleanliness.

Clutch Wear:

Some early models experienced faster clutch wear due to aggressive driving. Manual provides clutch inspection and replacement procedures.

Turbo Oil Line Leaks:

Potential for oil leaks from the turbocharger oil supply and return lines. Manual details inspection and replacement.

Fuel Injector Clogging:

Direct injection engines can be prone to injector fouling over time. Manual will have cleaning and replacement procedures.

📚 Vehicle History

Brand Heritage

Mazda Performance Legacy:

Mazda's long history of sporty vehicles, particularly the 'MazdaSpeed' performance sub-brand.

Model Evolution

Mazdaspeed3 Generation:

Second generation (BK chassis) of the Mazdaspeed3, an evolution of the first generation (2007-2009).

Changes From Previous Gen:

Refined styling, improved interior, chassis enhancements for better handling, updated engine management.

Production

Production Years:

2007-2013 (for the Mazdaspeed 3).

Manufacturing Location:

Hofu, Yamaguchi, Japan.

🏆 Awards & Recognition

Recognitions

Car And Driver 10Best:

MazdaSpeed 3 was frequently recognized on Car and Driver's 10Best lists during its production run, highlighting its performance and value.