Engine Mechanical:
Engine assembly, cylinder head, block, pistons, crankshaft, camshaft, timing system, lubrication system, cooling system, intake and exhaust manifolds, seals and gaskets.
Engine Performance:
Engine control module (ECM) operation, fuel injection, ignition system, emissions control systems (EVAP, EGR, catalytic converter), turbocharger (if applicable).
Transmission Manual:
Clutch system, manual transmission assembly, gearshift linkage, lubrication.
Transmission Automatic:
Automatic transaxle assembly, hydraulic control system, torque converter, valve body, electronic control unit (TCU), lubrication, cooler lines.
Drivetrain:
Front-wheel drive (FWD) transaxle, constant velocity (CV) joints, driveshafts, wheel bearings, differential.
Suspension:
Front suspension (struts, control arms, ball joints, sway bar), rear suspension (torsion beam, trailing arms, shock absorbers, sway bar), wheel alignment specifications.
Steering:
Power steering system (hydraulic or electric), steering column, steering rack and pinion, tie rods, steering wheel.
Brakes:
Front disc brakes, rear drum or disc brakes, anti-lock braking system (ABS), electronic brake-force distribution (EBD), brake fluid specifications, hydraulic lines, parking brake.
Electrical System:
Battery, alternator, starter motor, wiring diagrams, fuses, relays, lighting system (headlights, taillights, interior), power windows, power locks, mirrors.
Body And Frame:
Body structure, chassis components, doors, hood, trunk lid, bumpers, glass, seals, interior trim panels, underbody protection.
HVAC:
Heating, ventilation, and air conditioning (HVAC) system, A/C compressor, refrigerant, condenser, evaporator, blower motor, climate controls, cabin air filter.
Interior:
Seating systems, dashboard, instrument cluster, airbags, seat belts, interior lighting, sound insulation, floor mats.
Routine Maintenance:
Oil changes, filter replacements (oil, air, cabin), fluid checks and top-offs, spark plug replacement, tire rotation, brake inspection.
Diagnostic Procedures:
Troubleshooting guides for common drivability issues, electrical faults, HVAC problems, brake system malfunctions, using diagnostic scan tools.
Repair Procedures:
Step-by-step instructions for component removal, replacement, and reassembly of all major systems.
Engine Repair:
Head gasket replacement, timing belt/chain service, piston ring replacement, bearing service, valve adjustments.
Transmission Service:
Automatic transmission fluid (ATF) change and flush, clutch replacement, seal replacement, transmission rebuild procedures.
Brake System Service:
Brake pad and rotor replacement, brake caliper service, brake line replacement, brake bleeding, ABS component replacement.
Suspension And Steering Service:
Strut and shock absorber replacement, control arm replacement, ball joint and tie rod end replacement, power steering pump replacement, steering rack rebuild.
Electrical Diagnostics And Repair:
Circuit testing, component testing, wiring harness repair, sensor replacement, module programming (if supported by software).
HVAC System Service:
Refrigerant charging, leak detection, component replacement (compressor, condenser, evaporator), blower motor replacement, heater core replacement.
Body Repair:
Door and panel alignment, glass replacement, bumper repair/replacement, rust repair guidance.
Depth Of Information:
Comprehensive, factory-level detail for professional technicians and advanced DIYers.
Diagnostic Capabilities:
Includes diagnostic trouble codes (DTCs), live data interpretation, and guided troubleshooting trees.
Schematics And Diagrams:
Detailed electrical wiring diagrams, vacuum diagrams, and system schematics.
Torque Specifications:
Precise torque values for all fasteners critical to component assembly and safety.
Special Tools:
Identification of specialized tools required for specific repair procedures.
Oil Change Interval:
Every 6 months or 7,500 miles (12,000 km), whichever comes first (under normal driving conditions).
Air Filter Replacement Interval:
Every 15,000 miles (24,000 km) or as needed based on inspection.
Cabin Air Filter Replacement Interval:
Every 12 months or 15,000 miles (24,000 km).
Spark Plug Replacement Interval:
100,000 miles (160,000 km) for iridium-tipped plugs.
Coolant Change Interval:
Initial change at 60,000 miles (97,000 km), then every 30,000 miles (48,000 km) or 2 years thereafter.
Engine Oil Type:
SAE 5W-20, API SN certified. Meets Chrysler Material Standard MS-6395.
Engine Oil Capacity:
4.5 U.S. quarts (4.3 L) with filter change (for 2.0L engine).
Transmission Fluid Type Cvt:
CVT Fluid NS-2 or equivalent (e.g., Mopar CVT Fluid NS-2).
Transmission Fluid Type Automatic:
ATF+4 (MS-9602) (for 4-speed automatic).
Power Steering Fluid Type:
Mopar Power Steering Fluid (MS-5901) or equivalent.
Transmission Cvtheats:
CVT transmissions are known to be a weak point, with potential for overheating, hesitation, and premature failure. Regular fluid changes are critical.
Suspension Noise:
Worn or failing front struts, sway bar links, and bushings can cause clunking or rattling noises.
Electrical Issues:
Various electrical gremlins, including faulty power window motors, interior lights, and sensor failures, have been reported.
HVAC Performance:
Concerns regarding the effectiveness of the HVAC system in extreme temperatures and potential for blower motor failure.