🏷️ Basic Information

Make:

BMW

Model:

335is

Year:

2013

Model Code:

F30 (though 335is was primarily E92/E93 chassis for its run, this product seems to be referring to the last iteration of the 335is before the F30 generation fully superseded it, potentially encompassing late E9x models or early F30 variants with similar powertrain focus)

Product Type:

Service & Repair Manual Software

Licensing:

Officially Licensed

👋 Introduction

Segment:

Luxury Sport Sedan/Coupe/Convertible.

Target Audience:

Enthusiast owners seeking to perform their own maintenance and repairs, independent repair shops specializing in European vehicles.

Competitors:

Audi A4/S4, Mercedes-Benz C-Class, Infiniti G37/Q50, Lexus IS.

Powertrain Highlight:

The 'is' designation signifies a performance-oriented variant, typically featuring a more powerful engine tune, enhanced cooling, upgraded brakes, and often the M-DCT (Dual Clutch Transmission) option, offering a more engaging driving experience than standard 335i models.

Manual Value Proposition:

Provides official, accurate, and detailed procedures directly from the manufacturer, crucial for maintaining the complex systems of a performance BMW.

📋 Manual Details

Primary Coverage:

Mechanical and electrical systems, diagnostics, repair procedures, maintenance schedules, troubleshooting for the 2013 BMW 335is.

Estimated Pages:

Likely over 2000 pages, characteristic of comprehensive official service manuals for this era of BMW.

Type:

Comprehensive Service and Repair Manual

Language:

English

Format:

Software (Digital)

📖 Manual Coverage

Powertrain:

Engine mechanicals (N54/N55 variants for 335is), fuel system, ignition system, cooling system, exhaust system, turbocharger systems.

Drivetrain:

Transmission (DCT/Manual), clutch, driveshafts, differentials, axles.

Suspension Steering:

Front and rear suspension components, shock absorbers, springs, bushings, steering rack, power steering system.

Brakes:

Brake system hydraulics, ABS, DSC, parking brake, brake pad/rotor replacement, bleeding procedures.

Electrical Electronics:

Battery, charging system, starter motor, lighting systems, instrument cluster, body control modules (BCM), comfort systems, infotainment wiring, sensor diagnostics.

Bodywork:

Body panels, doors, windows, locks, interior trim, seats, HVAC system, climate control.

Diagnostics:

OBD-II diagnostics, fault code interpretation, guided troubleshooting trees, specific diagnostic procedures for all major systems.

Routine Maintenance:

Oil and filter changes, air filter replacement, cabin filter replacement, spark plug replacement, brake fluid flush, coolant flush.

Component Replacement:

Detailed step-by-step instructions for replacing virtually all major and minor components.

Rebuilds:

Engine component rebuilds (pistons, rings, valves), transmission rebuilds, differential rebuilds.

Timing System:

Timing chain inspection, replacement, VANOS system service, specific procedures for BMW's Double VANOS.

Turbocharger:

Turbocharger diagnosis, removal, installation, wastegate and actuator testing.

Electrical Diagnostics:

Wiring diagrams, connector pinouts, troubleshooting electrical faults using multimeters and oscilloscopes.

Software Coding:

Basic information on software updates and module coding procedures, often requiring specialized BMW diagnostic tools (ISTA/P).

Depth:

Comprehensive. Covers everything from basic fluid changes to complex engine and transmission overhauls, including diagnostic procedures for electronic control units (ECUs).

📊 Manual Specifications

Format Details:

Likely a proprietary software application or a collection of linked PDF files. Searchable text is a key feature for digital manuals.

Print Capability:

Printable pages are typically supported, allowing users to print specific sections for use in the workshop.

Binding Type:

N/A (Digital Software)

Paper Type:

N/A (Digital Software)

⚙️ Engine Specifications

Engine Code:

N54B30 (twin-turbocharged inline-6) or N55B30 (single twin-scroll turbo inline-6), depending on specific model year/variant within the 2013 timeframe. The 335is typically utilized the N54.

Displacement:

3.0 Liters (2979 cc)

Horsepower Is:

320 hp @ 5800 rpm (for N54 in 335is)

Torque Is:

330 lb-ft @ 1500-5000 rpm (for N54 in 335is); 303 lb-ft (standard N55)

Boost Pressure:

Typically around 10-12 psi (stock)

Injection Type:

Direct Injection (High-Pressure Fuel Injectors)

Fuel Type:

Premium Unleaded Gasoline (91 octane or higher recommended)

Fuel Pump Pressure:

High-pressure fuel pump (HPFP) with operating pressures exceeding 2000 psi.

Coolant Type:

BMW Blue Coolant (G48 ethylene glycol based)

Oil Type Recommendation:

BMW Longlife-01 (LL-01) approved synthetic oil, typically SAE 0W-40 or 5W-40.

Oil Capacity:

Approximately 6.5 quarts (6.2 liters) with filter change.

🔧 Transmission

Type:

6-speed Manual Transmission (Getrag GS6-37BZ or similar)

Type:

7-speed M Double Clutch Transmission (M-DCT) (Drivelogic)

M Dct Features:

Multiple shift modes (including Sport+), launch control, automatic rev-matching on downshifts.

Manual Transmission Fluid:

BMW MTF LT-3 (or equivalent API GL-4 SAE 75W-80)

Dct Transmission Fluid:

BMW DCTF-1 (or equivalent Pentosin FFL-3)

📐 Dimensions

Wheelbase:

110.6 inches (2810 mm)

Length:

181.0 inches (4599 mm)

Width:

70.3 inches (1786 mm)

Height:

56.3 inches (1430 mm)

Curb Weight Manual:

Approx. 3649 lbs (1655 kg)

Curb Weight Dct:

Approx. 3695 lbs (1676 kg)

Gross Vehicle Weight Rating:

Approx. 4718 lbs (2140 kg)

Trunk Volume Coupe:

12.0 cu ft (339 liters)

Trunk Volume Convertible:

11.1 cu ft (314 liters) with roof up, 2.4 cu ft (68 liters) with roof down.

🛡️ Safety Features

NHTSA Overall Rating:

Not specifically rated for 'is' model, but standard 3-Series Coupe/Convertible received 4-star overall rating (model year dependent).

IIHS Ratings:

Typically 'Good' in front and side crash tests for similar E92/E93 models.

Traction Control:

Dynamic Traction Control (DTC), Dynamic Stability Control (DSC).

Brake Assist:

Anti-lock Braking System (ABS), Cornering Brake Control (CBC).

Tire Pressure Monitoring:

Yes

Airbags:

Front dual-stage airbags, front side-impact airbags, front and rear head protection system (air curtains).

Seatbelts:

Active head restraints (front), pre-tensioners, force limiters.

💡 Technology Features

System Name:

BMW iDrive (CCC or CIC generation depending on specific build date within 2013).

Features:

Navigation, CD/DVD player, AM/FM radio, auxiliary audio input, USB integration, Bluetooth connectivity for audio and phone calls.

Parking Assistance:

Park Distance Control (PDC) - front and rear sensors.

Cruise Control:

Standard cruise control, optional Active Cruise Control (ACC) with braking functionality.

Bluetooth:

Standard for phone calls and audio streaming.

Usb:

Yes, for media playback and device charging/connection.

🔧 Maintenance

Oil Change Interval:

Variable service interval based on oil condition sensor and driving style (often 10,000-15,000 miles or annually).

Spark Plug Replacement:

Typically around 60,000 miles. Consult manual for exact type (e.g., NGK SILZKFR8E7S for N54).

Brake Fluid Flush:

Every 2 years (regardless of mileage).

Coolant Flush:

Typically every 4 years or 100,000 miles, though long-life coolant can last longer. Check manual for specific BMW recommendation.

Power Steering Fluid:

Pentosin CHF 11S (Green Hydraulic Fluid).

Differential Fluid:

BMW SAF-XJ 75W-140 (or equivalent synthetic API GL-5).

Brake Fluid:

DOT 4 Low Viscosity (LV) High Performance Brake Fluid.

High Pressure Fuel Pump:

Common failure point on N54 engines, leading to misfires and stalling. Requires replacement.

Fuel Injectors:

Early N54 injectors could fail; later revisions improved reliability. Symptoms include rough idle and misfires.

Turbocharger Wastegate Rattle:

Characteristic 'diesel-like' sound on startup for N54 engines, often due to worn wastegate actuators. Can be fixed with updated actuators.

Water Pump Thermostat:

Electric water pump and thermostat can fail, leading to overheating. Requires replacement of the pump/thermostat assembly.

Oil Pan Gasket Leaks:

Common leak point on higher mileage vehicles.

📚 Vehicle History

Bmw Legacy:

BMW has a long-standing reputation for producing driver-focused, sporty vehicles with advanced engineering and performance capabilities.

3 Series History:

The 3 Series is BMW's core model line, evolving through multiple generations to represent compact executive sport sedans and coupes. The E90/E92/E93 generation (2006-2013) introduced significant technological advancements.

335Is Introduction:

The 335is model was introduced as a limited production, performance-enhanced version of the 335i. It bridged the gap between the standard 335i and the higher-performance M3, offering increased power and specific M Performance parts.

Production Period:

The E92/E93 335is was produced from model year 2011 to 2013.

Key Market Regions:

North America (USA and Canada) was a primary market for the 335is.

🏆 Awards & Recognition

Car And Driver 10Best:

The BMW 3 Series, in various configurations, has frequently appeared on Car and Driver's 10Best lists for its blend of performance, handling, and luxury.

Other Automotive Awards:

The 3 Series platform has consistently garnered awards for its design, engineering, and driving dynamics from various automotive publications and organizations.