Target Audience:
Do-it-yourselfers (DIY) and experienced mechanics
Advantage Over Print:
More convenient, less expensive than traditional paper manuals, searchable
Access Methods:
Downloadable to PC, desktop, laptop, smartphone, tablet; accessible via web browser
Licensing:
No extra fees, no expiry dates (perpetual access)
Cost Effectiveness:
Saves money by enabling self-repair over professional mechanic labor costs
Powertrain:
Engine service/repair, transmission service/repair, fuel injection, fuel system, emission system, engine control system, differential/drive, axle
Chassis:
Brake system, suspension, steering, chassis/body
Electrical And HVAC:
Wiring diagram, electrical system, heater/air conditioning
Interior And Safety:
Interior, restraint system
General Maintenance:
General maintenance, periodic lubrication
Troubleshooting:
Troubleshooting diagnostics
Repair Tasks:
Step-by-step repair instructions based on complete disassembly
Illustrations:
Hundreds of photos and illustrations
Engine Mechanical:
Engine assembly/disassembly, cylinder head service, piston and connecting rod service, crankshaft service, timing system service
Transmission Service:
Manual transmission removal/installation, automatic transmission overhaul, torque converter service, clutch service (for manual)
Brake System Repair:
Brake pad replacement, rotor resurfacing/replacement, caliper service, brake fluid bleeding, parking brake adjustment
Suspension And Steering Repair:
Strut and shock absorber replacement, ball joint and tie rod end replacement, power steering system service, wheel alignment procedures
Electrical System Diagnostics:
Starter motor and alternator testing/replacement, battery service, lighting system repair, fuse and relay identification and testing, power window and lock system diagnosis
Fuel And Emission Control:
Fuel pump replacement, fuel injector service, exhaust system repair, catalytic converter replacement, EVAP system diagnostics
HVAC System Service:
A/C compressor replacement, refrigerant charging procedures, blower motor replacement, heater core service
Body And Interior Repair:
Door panel removal, seat replacement, dashboard disassembly, body panel repair, bumper replacement
Diagnostic Troubleshooting Charts:
Systematic guides for identifying and resolving common vehicle faults.
Depth:
Comprehensive factory-level detail for DIY and professional mechanics
Torque Specifications:
Detailed torque values for critical fasteners across all systems.
Diagnostic Trouble Codes:
Information on common OBD-II codes and their probable causes.
Component Testing:
Procedures for testing the functionality of various electrical and mechanical components.
Engine Options 2013 Cerato:
Likely 1.6L Gamma G4FC and 2.0L Nu G4NA MPI engines (common for this generation, specific confirmation requires VIN)
Engine Displacement 1.6L:
1591 cc (approximate)
Engine Displacement 2.0L:
1999 cc (approximate)
Fuel Delivery:
Multi-point Fuel Injection (MPI)
Engine Control Unit:
ECU (Engine Control Unit) with integrated diagnostics
IIHS Crash Test Ratings 2013:
Likely achieved good ratings in relevant categories for the time (e.g., Frontal Offset, Side Impact)
Active Safety Systems:
Anti-lock Braking System (ABS), Electronic Stability Control (ESC), Traction Control System (TCS), Electronic Brake-force Distribution (EBD)
Passive Safety Features:
Multiple airbags (front, side, curtain), front seatbelt pretensioners, active head restraints
Infotainment Options:
Available with AM/FM/CD/MP3 audio system, USB/Aux input, Bluetooth connectivity, and optional touchscreen navigation systems depending on trim level.
Driver Assistance Features:
Parking assist sensors (rear), backup camera (optional on higher trims).
Connectivity Ports:
USB, AUX input ports for audio connectivity.
Oil Change Interval:
Typically every 7,500 miles or 6 months (refer to manual for specific severe/normal driving conditions and oil type)
Air Filter Replacement:
Recommended every 15,000-30,000 miles or as needed based on driving environment
Cabin Air Filter Replacement:
Recommended every 15,000-30,000 miles or annually
Spark Plug Replacement:
Depending on engine type (e.g., Iridium plugs may last 60,000-100,000 miles)
Engine Oil Specification:
API SN or higher, ILSAC GF-5 compliant, viscosity grade typically 5W-20 or 5W-30 (check manual for exact specification)
Coolant Type:
Ethylene glycol-based coolant, typically a Long Life (LLC) type (e.g., Asian red or pink coolant) - ensure correct mixture ratio (50/50)
Brake Fluid Type:
DOT 3 or DOT 4 brake fluid (refer to manual for specific requirement)
Common Maintenance Items:
Regular checks of brakes, suspension components, exhaust system, and fluid levels.
Potential Wear Items:
Brake pads and rotors, tires, suspension bushings, and struts/shocks over time.
Kia Motors History:
Kia Motors is a South Korean automobile manufacturer, part of the Hyundai Motor Group, with a history dating back to 1944, evolving into a major global automotive player.
Cerato Generation Evolution:
The 2013 model is part of the second generation (YD) facelift, which introduced updated styling, improved interior, and enhanced features compared to the initial YD launch.
Manufacturing Locations:
Primarily manufactured in South Korea (Hwaseong) and also assembled in various other global locations depending on market.
