Segment:
Sport Touring / Roadster
Target Audience:
Owners seeking to perform their own maintenance, repairs, and modifications.
Key Competitors:
Honda VFR, Ducati ST Series, Yamaha FJR1300
Design Philosophy:
A blend of performance, comfort for longer rides, and BMW's characteristic engineering.
Notable Innovations:
Telelever front suspension for improved handling and reduced brake dive, Paralever rear suspension, Shaft drive, Optional ABS.
Primary Coverage:
Mechanical Repair and Maintenance
Electrical Coverage:
Wiring Diagrams and Electrical System Diagnosis
Body And Chassis Coverage:
Bodywork, Suspension, and Frame
Type:
Service Repair Manual
Engine Systems:
Fuel Injection, Ignition, Cooling, Lubrication, Top End (Cylinder Heads, Valves), Bottom End (Crankcase, Crankshaft, Con-rods)
Transmission And Drivetrain:
Clutch, Gearbox (Transmission), Final Drive (Shaft Drive,bevel gear)
Brakes And Suspension:
Front and Rear Brake Systems (Hydraulic, ABS), Telelever Front Suspension, Paralever Rear Suspension, Wheel Bearings
Electrical System:
Battery, Charging System (Alternator, Regulator), Starting System, Lighting, Instrumentation, ECU, Sensors, ABS Module, Wiring Harnesses
Fuel And Exhaust:
Fuel Tank, Fuel Pump, Injectors, Exhaust System
Body And Frame:
Frame, Body Panels, Seat, Handlebars, Fairing
Routine Maintenance:
Oil Changes, Filter Replacements, Spark Plug Service, Valve Clearance Checks, Chain/Shaft Drive Lubrication, Brake Fluid Replacement
Major Repairs:
Engine Rebuilds, Transmission Overhauls, Suspension Component Replacement, Brake Caliper Overhaul, Fuel System Servicing
Troubleshooting:
Diagnostic Procedures for Engine, Electrical, and Mechanical Faults, Fault Code Interpretation
Adjustments:
Throttle Cable, Clutch Cable, Idle Speed, Suspension Settings
Depth Of Coverage:
Comprehensive: From basic owner maintenance to full engine and gearbox disassembly/reassembly.
Diagnostic Capabilities:
Detailed electrical schematics, component testing procedures, and troubleshooting trees.
Engine Type:
Four-stroke, horizontally opposed boxer-twin, DOHC, 4 valves per cylinder
Bore X Stroke:
99 mm x 70.5 mm
Compression Ratio:
11.3:1
Horsepower:
90 hp @ 7500 rpm
Torque:
71.3 lb-ft @ 6000 rpm
Fuel Delivery:
Electronic Fuel Injection (Bosch Motronic MA 2.4 or similar)
Fuel Type:
Unleaded premium (95 RON / 91 AKI)
Ignition System:
Digital Electronic Ignition (CDI)
Cooling System:
Oil-cooled with fan assistance
Oil Capacity W Filter:
Approx. 4.0 liters (4.2 US quarts)
Length:
Approx. 2185 mm (86.0 in)
Width:
Approx. 870 mm (34.3 in) at handlebars
Height:
Approx. 1245 mm (49.0 in) at seat
Dry Weight:
Approx. 209 kg (461 lbs)
Gross Vehicle Weight Rating:
Approx. 450 kg (992 lbs)
Fuel Tank Capacity:
25 liters (6.6 US gallons)
ABS Availability:
Optional (BMW Motorrad Integral ABS)
Braking System:
Dual 320 mm discs with 4-piston calipers (front), Single 265 mm disc with 2-piston caliper (rear)
Suspension Benefits:
Telelever front and Paralever rear contribute to stability and predictable handling, even under braking.
Lighting:
Halogen headlight, integrated turn signals
Instrumentation:
Analog tachometer and speedometer, LCD multi-function display (odo, trip, clock, temperature, fuel level).
ABS:
Optional Integral ABS system, a pioneering feature for motorcycles at the time.
ECU:
Bosch Motronic engine management system for fuel injection and ignition control.
Oil Change Interval:
Every 10,000 km (6,000 miles) or annually, whichever comes first.
Valve Check Interval:
Every 20,000 km (12,000 miles)
Brake Fluid Change Interval:
Every 2 years
Engine Oil Type:
SAE 20W-50 or 15W-50 motorcycle-specific synthetic or semi-synthetic oil (e.g., BMW Advantec Ultimate Full Synthetic 15W-50).
Transmission Oil Type:
SAE 75W-90 GL-5 gear oil.
Brake Fluid Type:
DOT 4 hydraulic brake fluid.
Common Wear Items:
Clutch plates, output shaft seal, regulator/rectifier, alternator brushes.
Electrical Concerns:
Occasional issues with wiring harness chafing, alternator output, and ABS sensor reliability.
Suspension Maintenance:
Regular inspection of fork seals and rear shock absorber for leaks.
Brand Focus:
BMW Motorrad is renowned for its engineering prowess, reliability, and boxer engine heritage.
Positioning In Lineup:
Designed as a sportier, more agile alternative to the RT touring models, with a focus on handling.
Production Period:
1999-2005
Manufacturing Location:
Berlin, Germany (BMW Motorrad Plant)
