🏷️ Basic Information

Make:

Daewoo

Model:

Matiz

Generation Codes:

M100, M150

Model Years Covered:

1998-2011

👋 Introduction

Segment:

Compact City Car (Kei car influence in early generations)

Target Audience:

First-time car buyers, urban commuters, budget-conscious consumers.

Key Competitors:

Hyundai Getz, Kia Picanto, Suzuki Alto, Fiat Seicento/Panda, Chevrolet Spark (later generations).

Design Philosophy:

Compact, fuel-efficient, affordable, maneuverable in urban environments.

Diagnostic Capability:

Provides technicians and DIY enthusiasts with the same information used by authorized service centers.

📋 Manual Details

Primary Coverage:

Mechanical Repairs, Routine Maintenance, Servicing, Electrical Diagnostics, Body Repair

Engine Coverage:

0.8L S-TEC I3 Petrol, 1.0L S-TEC I4 Petrol

Transmission Coverage:

5 Speed Manual Transmission

Estimated Page Count:

Extensive (Specific number not provided, but described as comprehensive)

Type:

Repair Service Manual

Language:

English (Presumed based on product description and industry standards for such manuals)

Delivery Format:

Downloadable HTML Interface PDF Format

📖 Manual Coverage

Engine Mechanical:

Full coverage of engine components, disassembly, assembly, and rebuilding procedures.

Engine Cooling:

Radiator, thermostat, water pump, coolant flow, troubleshooting.

Engine Electrical:

Ignition system, starting system, charging system, sensors, actuators.

Engine Control:

ECU (Engine Control Unit) operation, fuel injection system, emissions control.

Engine Exhaust:

Exhaust manifold, catalytic converter, muffler, emissions regulations.

Suspension:

Front and rear suspension components, geometry, shock absorbers, springs, bushings.

Wheel Alignment:

Alignment specifications, camber, caster, toe adjustments, procedures.

Tires And Wheels:

Tire pressure, sizes, rotation, balancing, wheel specifications.

Driveline And Axle:

CV joints, drive shafts, differential (if applicable), wheel bearings.

Hydraulic Brakes:

Brake fluid, lines, hoses, master cylinder, booster, bleeding procedures.

Front And Rear Disc Brakes:

Brake pads, rotors, calipers, servicing, replacement.

Parking Brakes:

Mechanical parking brake system, adjustments, cable replacement.

Manual Transmission:

Gearbox components, shifting mechanisms, maintenance, repair, fluid specifications.

Clutch:

Clutch disc, pressure plate, release bearing, hydraulic clutch system, adjustments, replacement.

Steering:

Steering column, steering rack, tie rods, linkages, adjustments.

Power Steering System:

Hydraulic pump, fluid, hoses, steering rack assistance, troubleshooting.

Heating And Ventilation:

HVAC system components, blower motor, controls, cabin filters, ducting.

Air Conditioning:

Refrigerant system, compressor, condenser, evaporator, servicing procedures.

Restraints:

Airbag system components, seat belts, SRS module, safety precautions.

Body And Accessories:

Interior and exterior trim, doors, windows, locks, latches, power accessories.

Pre Delivery Inspection:

Checklists and procedures for new vehicle preparation.

Body Repair:

Structural repair, panel replacement, collision repair techniques.

Electrical Wiring Diagrams:

Comprehensive wiring schematics for all vehicle electrical systems.

Maintenance Procedures:

Oil changes, filter replacements, fluid checks and top-ups, spark plug replacement, belt inspection/replacement.

Repair Procedures:

Step-by-step instructions for component removal, repair, and reinstallation for all covered systems.

Troubleshooting:

Diagnostic flowcharts, symptom analysis, and common fault diagnosis for various systems.

Technical Specifications:

Torque specifications, clearances, fluid capacities, electrical component resistance/voltage readings.

Explocded Views:

Detailed exploded views of components for easier identification and assembly reference.

Labor Time Guide:

Includes a labor time guide, useful for estimating repair times and costs.

Depth:

Comprehensive, covering basic maintenance to advanced engine and electrical system repairs.

📊 Manual Specifications

Format:

PDF (within an HTML interface)

Printability:

Fully printable (selected pages or whole manual).

Binding:

N/A (Digital Download)

Paper Type:

N/A (Digital Format)

User Interface:

HTML Interface

Detail Level:

Detailed and complete step-by-step written procedures with pictures and diagrams.

Relevance:

Represents the same information used by professional technicians.

⚙️ Engine Specifications

0.8L S-Tec I3:

Displacement: 796 cc; Configuration: 3-cylinder, inline; Bore x Stroke: Typically around 72.0 mm x 69.3 mm; Power Output: Approx. 50-55 PS; Torque: Approx. 70-75 Nm.

1.0L S-Tec I4:

Displacement: 995 cc; Configuration: 4-cylinder, inline; Bore x Stroke: Typically around 72.0 mm x 69.3 mm; Power Output: Approx. 58-65 PS; Torque: Approx. 85-95 Nm.

Fuel Type:

Unleaded Petrol

Injection Type:

Multi-point Fuel Injection (MPI)

ECU Type:

ECU controlled electronic fuel injection and ignition timing.

🔧 Transmission

Type:

5-Speed Manual Transmission

Automatic:

Some models and markets may have offered an automatic transmission, but this manual specifically covers the 5-speed manual.

Gear Ratios:

Specific gear ratios would be detailed within the manual, crucial for performance and economy analysis.

Manual Transmission Fluid:

GL-4 75W-90 or equivalent manual transmission fluid (specific part numbers and brands to be confirmed in manual).

📐 Dimensions

Length:

Approx. 3495 mm (M100), slightly longer for M150 depending on bumper design.

Width:

Approx. 1595 mm

Height:

Approx. 1485 mm

Curb Weight:

Approx. 750-800 kg (depending on engine and trim)

Trunk Capacity:

Limited, typical for city cars, often around 150-200 liters, expandable with rear seats folded.

🛡️ Safety Features

Crash Test Results:

Early models generally received low crash test ratings from Euro NCAP and other organizations due to their size and construction; later improvements may exist but it was not a strong point.

ABS:

Available on higher trim levels or later models.

Airbags:

Driver airbag standard, passenger airbag optional or standard on higher trims.

Seat Belts:

Front and rear seat belts, with pre-tensioners on front belts.

💡 Technology Features

Audio System:

Basic AM/FM radio with CD player or cassette player, often with 2 or 4 speakers.

Cruise Control:

Rarely fitted as standard, possibly an aftermarket option.

Bluetooth:

Not typically featured in original factory specifications.

Power Windows:

Available on higher trims, often as front-only.

🔧 Maintenance

Oil Change Interval:

Typically every 7,500 - 10,000 miles (12,000 - 15,000 km) or 6-12 months, whichever comes first (refer to manual for precise recommendation).

Air Filter Replacement:

Generally every 15,000 - 30,000 miles (24,000 - 48,000 km) or annually.

Spark Plug Replacement:

Depends on plug type (copper, platinum, iridium), typically 30,000 - 60,000 miles (48,000 - 96,000 km).

Timing Belt Replacement:

Crucial for S-TEC engines. Typically every 60,000 - 90,000 miles (96,000 - 144,000 km) or 5-7 years. Failure can cause severe engine damage.

Engine Oil Type:

API SG/SH/SJ or ACEA A2/A3, SAE 5W-30 or 10W-40 (refer to manual for exact viscosity based on climate).

Coolant Type:

Ethylene Glycol based coolant, typically a 50/50 mix with distilled water (often blue or green).

Brake Fluid Type:

DOT 3 or DOT 4 brake fluid.

Power Steering Fluid:

ATF Dexron II or III (if hydraulic power steering is equipped).

Common Problems:

Electrical gremlins (especially window regulators, central locking), minor oil leaks, suspension wear (bushings, ball joints), clutch wear, rust in certain climates, potential for head gasket issues if overheated.

Part Numbers:

The manual will contain specific part numbers for all components, vital for accurate ordering and replacement.

📚 Vehicle History

Daewoo Automotive:

A South Korean manufacturer, Daewoo Motor Company was known for producing a range of vehicles, often based on General Motors platforms, before its acquisition by GM.

M100 Generation:

Introduced in 1997, characterized by its distinctive rounded styling, often compared to the Fiat Cinquecento.

M150 Facelift:

Introduced around 2003, featuring updated styling, revised interior, and often improved safety features and powertrain options. The manual covers both M100 and M150 iterations.

Manufacturing Locations:

Primarily South Korea, with some production or assembly in other countries.

🏆 Awards & Recognition

Safety Awards:

Generally did not receive significant safety awards; often ranked low in independent crash tests.

Fuel Economy:

Praised for its excellent fuel efficiency, a primary selling point.