🏷️ Basic Information

Make:

Daihatsu

Model:

Cuore Mira

Model Generations Covered:

L700 Series (specifically 1998-2003 models)

Model Years Covered:

1998, 1999, 2000, 2001, 2002, 2003

👋 Introduction

Market Position:

The Daihatsu Cuore Mira (L700 series) was a popular subcompact city car, known for its fuel efficiency and affordability, particularly in Asian and European markets. This manual caters to owners and independent repair shops maintaining these vehicles.

Competitive Analysis:

Competed with other kei car/subcompact segments from manufacturers like Suzuki (Alto), Mitsubishi (Minica), and Honda (Life) in its primary markets. Known for its practical design and economical operation.

Key Features:

Compact dimensions, efficient engine options, maneuverability in urban environments, and cost-effective ownership.

Digital Advantage:

Offers the convenience of digital access, allowing for quick searches, printing of specific pages, and storage on electronic devices, making it a more practical alternative to older paper manuals.

User Benefit:

Empowers owners to perform their own maintenance and repairs, saving money on labor costs and enhancing their understanding of their vehicle.

📋 Manual Details

Coverage Areas:

Complete factory service and repair for all styles and configurations of the Daihatsu Cuore Mira 1998-2003.

Completeness:

Described as 'COMPLETE official full factory service repair manual' and 'all service information you could ever need', indicating no sections are omitted.

Page Count:

Hundreds of pages (specific count not provided, but implies comprehensive depth)

Manual Type:

Complete Official Full Factory Service Repair Manual / Workshop Manual

Language:

English

Format:

PDF

📖 Manual Coverage

Systems Covered:

Engine Service/Repair, Transmission Service/Repair, Brake System, Wiring Diagram, Electrical System, Suspension, Periodic Lubrication, Steering, Cooling System, Fuel Injection, Fuel System, Emission System, Heater/Air Conditioning, Engine Control System, Chassis/Body, Restraint System, Interior, Differential/Drive, Axle, General Maintenance, Troubleshooting.

Specific Engine Systems:

Engine mechanical components (cylinder head, block, pistons, crankshaft), lubrication system, cooling system (radiator, thermostat, water pump), fuel delivery (pump, injectors, filter), intake and exhaust systems, engine management system (ECU, sensors), and emissions control.

Specific Transmission Systems:

Manual transmission components (clutch, gearbox, shift linkage), automatic transmission operation (torque converter, valve body, planetary gears), driveline components (CV joints, axles).

Specific Braking Systems:

Front disc brakes, rear drum brakes (common configuration), hydraulic system (master cylinder, brake lines, calipers, wheel cylinders), parking brake system, ABS/EBD components.

Specific Electrical Systems:

Battery, alternator, starter motor, ignition system, lighting (headlights, taillights, interior), wipers, horn, power windows, central locking, fuses, relays, and wiring harnesses.

Specific Suspension Systems:

Front MacPherson struts, rear independent or semi-independent suspension (configuration varies), springs, shock absorbers, control arms, bushings, and steering linkage.

Specific Steering Systems:

Rack and pinion steering system, steering column, power steering pump and lines (if equipped), and steering wheel components.

Specific Body Chassis Systems:

Body structure, doors, hood, trunk lid, bumpers, interior trim panels, seats, dashboard, HVAC system, and chassis components.

Fuel Systems:

Includes components like the fuel tank, fuel pump, fuel filter, fuel lines, fuel injectors, and fuel pressure regulator. Covers diagnostics and replacement procedures.

Emission Control Systems:

Covers components such as the catalytic converter, oxygen sensors, EGR system (if equipped), and evaporative emission control system (EVAP). Includes diagnostic procedures for emission-related fault codes.

Heating Air Conditioning Systems:

Details on the HVAC system, including the blower motor, heater core, evaporator, condenser, refrigerant lines, and control modules. Guidance on refrigerant handling and system evacuation/charging is typically included.

Engine Control Systems:

Focuses on the Engine Control Unit (ECU), various sensors (e.g., crankshaft position, camshaft position, throttle position, manifold absolute pressure, coolant temperature), actuators (e.g., idle air control valve), and diagnostic trouble codes (DTCs).

Restraint Systems:

Information related to seat belts, pre-tensioners, airbag deployment systems, and related sensors and control modules. Emphasizes safety precautions when working with airbag systems.

Interior Components:

Covers removal and installation of interior trim, dashboard components, instrument cluster, seats, door panels, and headliner.

Differential Drive Axle:

Details on the differential, drive axles, constant velocity (CV) joints, and related seals and bearings. Includes procedures for inspection and replacement.

Procedures Included:

Step-by-step instructions for complete disassembly, repair procedures, diagnostic troubleshooting, preventative maintenance, component replacement, and system adjustments.

Engine Repair Procedures:

Engine overhaul, timing belt replacement, valve adjustment, piston ring replacement, head gasket replacement, oil seal replacement, and engine mounting checks.

Transmission Repair Procedures:

Clutch replacement, transmission fluid changes, automatic transmission overhaul, seal replacement, and driveshaft boot repair.

Braking System Procedures:

Brake pad and shoe replacement, brake rotor/drum resurfacing or replacement, brake fluid bleeding, caliper and wheel cylinder overhaul, parking brake adjustment, and ABS system diagnostics.

Electrical System Procedures:

Battery testing and replacement, charging system diagnostics, starter motor testing, fuse and relay identification and replacement, bulb replacement, switch testing, and troubleshooting wiring faults using diagrams.

Suspension Procedures:

Shock absorber and strut replacement, spring replacement, control arm bushing replacement, wheel alignment checks and adjustments, and tie rod end replacement.

Steering System Procedures:

Power steering fluid checks and changes, rack and pinion seal replacement, tie rod end replacement, and steering column adjustments.

Body Chassis Procedures:

Panel alignment, door and latch adjustment, interior trim removal and installation, HVAC component replacement (blower motor, evaporator, condenser), seat repair, and basic body panel repair.

Fuel System Procedures:

Fuel filter replacement, fuel pump testing, injector cleaning and replacement, and troubleshooting fuel delivery issues.

General Procedures:

Includes general maintenance tasks, diagnostic procedures for troubleshooting, and specific repair instructions for various components and systems.

Technical Depth:

Comprehensive, suitable for both do-it-yourselfers and experienced mechanics. Covers basic maintenance to advanced repairs and diagnostics.

Troubleshooting Depth:

Comprehensive diagnostic flowcharts and procedures for identifying and resolving common and complex issues across all vehicle systems.

📊 Manual Specifications

File Format:

PDF

File Requirements:

Requires Adobe PDF Reader and Winzip (or equivalent decompression utility), both available for free download.

Compatibility:

Compatible with all versions of Windows and Mac operating systems. Accessible on desktops, laptops, smartphones, and tablets via web browser.

Download Speed:

Advertised as a 'Speed Download', implying efficient retrieval of the digital file.

Print Quality:

Printable (allows users to print entire manual or specific pages).

Binding Type:

Not Applicable (Digital PDF format)

Paper Type:

Not Applicable (Digital PDF format)

⚙️ Engine Specifications

Primary Engine:

Typically featured a 659cc 3-cylinder engine (e.g., EF-SE, EF-VE). Specific engine codes and variations exist depending on market and trim level.

Performance:

Power output generally ranged from approximately 40-64 horsepower, depending on naturally aspirated or turbocharged variants.

Fuel System:

Electronic Fuel Injection (EFI) system. Specific injector types and fuel pump pressures would be detailed in the manual.

🔧 Transmission

Standard:

Typically offered with a 5-speed manual transmission or a 3-speed automatic transmission.

Optional:

4-speed automatic transmission may have been available on certain higher trims or later models.

Features:

Includes details on clutch operation, torque converter functionality, gear shift mechanisms, and transmission fluid specifications (e.g., Dexron III for automatics).

📐 Dimensions

Exterior:

Kei car regulations dictate overall length, width, and height. Typically around 3,395 mm length, 1,475 mm width, and 1,500 mm height. Specific dimensions vary by body style (e.g., sedan, van).

Interior:

Designed for maximum interior space within Kei car regulations, offering seating for typically four occupants.

Weights:

Curb weight typically in the range of 700-800 kg, depending on transmission and equipment.

🛡️ Safety Features

Ratings:

Safety ratings vary by market and testing agency. Early models may have limited advanced safety features compared to modern vehicles.

Active Features:

ABS (Anti-lock Braking System) and EBD (Electronic Brakeforce Distribution) may be available on higher trim levels. Details on their operation and troubleshooting are included.

Passive Features:

Seat belts, front airbags (driver and passenger on some models), and reinforced body structures for impact protection.

💡 Technology Features

Infotainment:

Basic infotainment features, typically including an AM/FM radio and CD player or cassette player, depending on the trim level and original market.

Driver Assistance:

Limited to features like ABS and EBD where equipped. No advanced driver-assistance systems (ADAS) expected for this era.

Connectivity:

Basic connectivity, primarily through the audio system. No integrated Bluetooth or USB connectivity in most models.

🔧 Maintenance

Service Intervals:

Includes recommended intervals for oil changes (e.g., every 5,000-7,500 km or 6 months), air filter replacement, spark plug changes, transmission fluid, coolant flushes, and brake fluid renewal.

Periodic Lubrication:

Detailed guidance on lubricating chassis components, such as suspension points, steering linkage, and wheel bearings, as per manufacturer's recommendations.

Fluid Specifications:

Details on engine oil viscosity (e.g., 5W-30, 10W-30 API SG/SH), coolant type (e.g., ethylene glycol-based), brake fluid DOT specifications (e.g., DOT 3), transmission fluid types, and power steering fluid if applicable.

Known Issues:

Common issues addressed in the manual might include ignition system problems, minor oil leaks from gaskets, automatic transmission hesitation, or suspension wear due to age and mileage. Troubleshooting guides are provided for these.

📚 Vehicle History

Brand Heritage:

Daihatsu, a subsidiary of Toyota, has a long history of producing small, fuel-efficient vehicles, particularly in the microcar and Kei car segments.

Model Evolution:

The Cuore Mira lineage represents Daihatsu's long-standing commitment to the urban commuter car. The L700 generation saw updates in styling, powertrain efficiency, and interior refinement.

Production:

Produced primarily at Daihatsu's manufacturing facilities in Japan. The L700 series was a global model, sold under various names in different markets.