Engine:
Detailed overhaul, repair, diagnosis, and specifications for 3.5L V6 (GEMA) and 5.7L V8 HEMI (EZB/EZD) engines.
Fuel System:
Fuel delivery, injection, evaporative emissions, fuel tank, fuel pump, injectors, pressure regulator.
Transmission:
Repair and overhaul procedures for the 4-speed automatic (42RLE) and 5-speed automatic (NAG1/W5A580) transmissions, including torque converter, valve body, and solenoids.
Drivetrain:
Driveshaft, differential, axle shafts, propeller shafts, and associated components.
Suspension:
Front and rear suspension systems including control arms, struts, shocks, springs, sway bars, bushings, and alignment procedures.
Brakes:
Hydraulic brake system, ABS, EBD, brake calipers, rotors, pads, lines, master cylinder, and bleeding procedures.
Steering:
Power steering system, steering column, steering rack/gearbox, tie rods, and alignment.
Electrical System:
Battery, charging system (alternator), starting system (starter), ignition system, lighting, power distribution, fuses, relays.
Climate Control:
HVAC system, A/C compressor, refrigerant, heater core, evaporator, blower motor, controls.
Body And Chassis:
Body panels, doors, windows, interior trim, bumpers, chassis structural components.
Safety Systems:
Airbag system, seat belts, ABS, traction control, stability control.
Engine Repair:
Engine removal/installation, cylinder head assembly, valve train, piston/cylinder overhauling, crankshaft/bearing service.
Transmission Service:
Fluid changes, filter replacement, clutch service (for manual if applicable, though primarily automatic for this generation), transmission overhaul.
Brake Maintenance:
Brake pad/rotor replacement, brake fluid flush, caliper service, ABS component testing.
Suspension Repair:
Component replacement (shocks, struts, ball joints, tie rods), wheel alignment specifications.
Electrical Diagnostics:
Wiring diagrams, component testing, troubleshooting common electrical faults, starter/alternator testing.
Lubrication And Fluids:
Detailed lubrication points, fluid capacities, recommended fluid types (engine oil, transmission fluid, coolant, brake fluid, power steering fluid).
Inspections And Adjustments:
Routine inspections, belt tension adjustments, fluid level checks, brake adjustments.
Troubleshooting:
Systematic diagnostic procedures and common fault identification for various vehicle systems.
Technical Features:
Explanation of specific vehicle technologies and features relevant to repair and maintenance.
Engine Control Module:
Diagnosis and testing of engine control modules (ECMs) and related sensors.
Air Conditioning Service:
Refrigerant handling, compressor replacement, leak detection, system evacuation and charging.
Wheel Alignment:
Front and rear wheel alignment specifications and procedures.
Tire And Wheel:
Tire pressure recommendations, wheel torque specifications, tire rotation.
Body Repair:
Procedures for body panel removal/installation, door mechanisms, window regulators, exterior trim.
Interior Trim:
Removal and installation of interior panels, seats, dashboard components.
Lighting System:
Headlights, taillights, interior lighting, bulb replacement, wiring for lighting circuits.
Diagnostic Tools:
Information on using OBD-II scanners and specialized diagnostic tools for troubleshooting.
Depth Of Coverage:
Comprehensive. Covers basic maintenance, diagnostics, component-level repair, and complete system overhauls.
Engine Oil Change:
Refer to manual; typically 3,000-7,500 miles or based on oil life monitoring system.
Transmission Fluid Change:
Refer to manual; typically 60,000-100,000 miles, depending on driving conditions.
Coolant Flush:
Refer to manual; typically 60,000-100,000 miles or 5 years.
Engine Oil Spec:
Refer to manual; typically SAE 5W-20 or 5W-30 synthetic blend/full synthetic depending on engine and climate.
Coolant Type:
Refer to manual; typically HOAT (Hybrid Organic Acid Technology) coolant.
Brake Fluid Type:
DOT 3 or DOT 4
Common Issues V6:
Intake manifold gaskets, PCV system issues, occasional transmission solenoid failures.
Common Issues Hemi:
Rocker arm/lifter noise (lifter tick), potential head gasket issues in early models, exhaust manifold leaks.
General Issues:
Cx-body platform specific issues can include suspension component wear, electronic module failures, and interior trim creaks.