Engine Mechanical:
Detailed disassembly, assembly, inspection, and repair of all engine components for all available engines.
Engine Electrical:
Complete wiring diagrams, diagnostic procedures for engine control module (ECM), sensors, actuators, and ignition system.
Fuel System:
Diagnosis and repair of fuel injectors, fuel pump, fuel pressure regulator, evaporative emission control (EVAP) system.
Cooling System:
Thermostat, water pump, radiator, cooling fan diagnosis and replacement procedures.
Exhaust System:
Catalytic converter, muffler, exhaust manifold diagnosis and replacement.
Transmission Mechanical:
Detailed repair and overhaul procedures for automatic transmissions, including torque converter.
Transmission Electronic:
Transmission control module (TCM) diagnostics, shift solenoid testing, and transmission fluid pressure tests.
Drivetrain And Axles:
Front and rear axle, driveshaft, CV joints, differential service and repair.
Suspension System:
Front and rear suspension components (struts, shocks, control arms, ball joints, bushings), alignment specifications.
Steering System:
Power steering system diagnosis and repair, steering column, tie rods, and steering gear.
Brake System:
Front and rear brake pads, rotors, calipers, hydraulic system, ABS system diagnosis and repair.
Wheel And Tire:
Tire pressure monitoring system (TPMS) diagnosis, wheel bearing replacement, wheel torque specifications.
Body And Frame:
Body panel removal and installation, structural repairs, door and window mechanisms.
Interior Trim:
Dashboard, door panels, seat removal and installation.
HVAC System:
Air conditioning (A/C) system diagnosis, refrigerant handling, climate control module, heater core, blower motor.
Electrical System General:
Power distribution, battery, alternator, starter motor, lighting systems, interior/exterior electrical components.
Body Control Module Bcm:
Diagnosis and programming of the BCM and its associated functions (e.g., power locks, windows, interior lighting).
Infotainment System:
Radio, navigation system, speaker diagnostics and replacement (where applicable).
Safety Systems:
Airbag system diagnosis and replacement, seat belt mechanisms.
Preventive Maintenance:
Detailed schedules and procedures for oil changes, filter replacements, fluid checks, and belt inspections.
Troubleshooting Guides:
Systematic diagnostic flowcharts and symptom-based troubleshooting for common and complex issues.
Repair And Rebuild:
Step-by-step instructions for component removal, installation, and complete overhaul of major systems.
Diagnostic Procedures:
Specific procedures for using diagnostic scan tools, reading fault codes, and interpreting sensor data.
Specifications And Tolerances:
Torque values, clearances, fluid capacities, and critical measurements for all major components.
Wiring Diagrams:
Comprehensive, high-quality wiring schematics for all vehicle electrical systems.
Tightening Sequences:
Correct bolt tightening sequences for critical components like cylinder heads, intake manifolds, and wheel hubs.
Special Tool Identification:
Identification and usage instructions for specialized tools required for specific repairs.
Depth Level:
Comprehensive (covering from basic maintenance to full engine/transmission rebuilds).
Diagnostic Capability:
Advanced diagnostic procedures including oscilloscope usage and sensor data interpretation.
Repair Complexity:
Suitable for professional technicians and experienced DIY mechanics.
Oil Change Interval:
Every 6,000 miles (9,600 km) or 6 months, whichever comes first (under normal driving conditions).
Engine Air Filter:
Replace every 30,000 miles (48,000 km) or as needed based on inspection.
Cabin Air Filter:
Replace every 15,000 miles (24,000 km) or 12 months.
Spark Plug Replacement 2.7L/3.5L:
Replace at 100,000 miles (160,000 km) with Champion copper or equivalent.
Spark Plug Replacement 5.7L Hemi:
Replace at 100,000 miles (160,000 km) with Champion copper or equivalent.
Engine Oil 2.7L/3.5L:
SAE 5W-20, API SP or newer (Chrysler MS-6395 compliant).
Engine Oil 5.7L Hemi:
SAE 5W-20, API SP or newer (Chrysler MS-6395 compliant). Consider SAE 5W-30 for extreme heat or heavy towing.
Coolant Type:
Mopar HOAT (Hybrid Organic Acid Technology) Antifreeze/Coolant, Orange (MS-9769).
Power Steering Fluid:
Mopar Power Steering Fluid (MS-5901 compliant) or equivalent Dexron III/Mercon.
Common Issues:
Early models may experience issues with ball joints, control arm bushings, and water pump leaks. Some owners report accessory drive belt pulley issues. The 5.7L HEMI's Multi-Displacement System (MDS) can sometimes cause issues if not maintained properly.