Market Position:
The Ferrari 360 Challenge Stradale was positioned as a road-legal GT racing car, blending track performance with street usability, making it a highly sought-after collector's item.
Competitive Analysis:
Competed directly with other track-focused supercars of its era, offering a more aggressive and track-oriented driving experience compared to its standard 360 Modena counterpart.
Key Features:
Enhanced aerodynamics, lighter weight construction, race-derived suspension and braking systems, exclusive interior treatments, and a more potent engine tune compared to the standard 360.
Systems Covered:
General Information, Refilling and Maintenance, Engine, Injection-Ignition, Clutch-Gearbox-Differential, Steering, Suspension Systems and Wheels, Braking System, Instruments and Controls, Air Conditioning, Electrical System, Bodywork Parts
Estimated Page Count:
Detailed page count not provided in product information, but extensive coverage indicates hundreds of pages.
Manual Type:
Workshop Service Repair Manual
Engine:
Detailed diagnosis, repair, and overhaul of the F136 V8 engine, including cylinder heads, crankshaft, pistons, connecting rods, timing system, lubrication, and cooling.
Injection Ignition:
Comprehensive coverage of the Bosch Motronic engine management system, fuel injection, ignition timing, sensor diagnostics, and component testing.
Transmission Drivetrain:
Detailed procedures for the F1-Superfast electro-hydraulic automated manual gearbox, clutch operation, differential, driveshafts, and gearbox fluid maintenance.
Suspension Steering:
Information on double wishbone suspension, shock absorbers, springs, anti-roll bars, power steering system, and wheel alignment specifications.
Braking System:
In-depth details on the F40-style carbon-ceramic brake system (if applicable to the Stradale variant or as a common upgrade context), brake calipers, rotors, pads, brake fluid flushing, ABS, and ESP system diagnostics.
Electrical System:
Complete wiring diagrams, fuse box layouts, component testing, diagnosis of lighting, starter, charging system, and auxiliary electrical components.
Bodywork:
Procedures for body panel removal and installation, door mechanisms, interior trim, and common bodywork repairs.
Maintenance:
Routine maintenance tasks, oil changes, filter replacements, fluid checks and changes (engine oil, gearbox oil, brake fluid, coolant), spark plug replacement, and belt inspections.
Repair Overhaul:
Detailed step-by-step instructions for major component overhauls, including engine rebuilds, gearbox servicing, suspension component replacement, and brake system servicing.
Diagnostics Troubleshooting:
Diagnostic flowcharts, common fault finding, error code interpretation, and specific troubleshooting procedures for various systems.
Technical Depth:
Comprehensive, covering basic owner-level maintenance to full mechanical and electrical system overhauls. Suitable for amateur enthusiasts and professional technicians.
Compatibility:
All Versions of Windows & Mac
Requirements:
Adobe PDF Reader & WinZip
Print Quality:
High-resolution, clear text and diagrams suitable for printing.
Binding Type:
Digital (PDF - not a physical book, implies digital download).
Paper Type:
N/A (Digital Format).
Engine Type:
Naturally Aspirated V8
Engine Code:
F136 Corsa (derived from F136)
Displacement:
3.6 Liters (3586 cc)
Horsepower:
425 hp (313 kW) at 8500 rpm
Torque:
275 lb-ft (373 Nm) at 4750 rpm
Fuel Injection:
Bosch Motronic ME7.3.2 Sequential Fuel Injection
Fuel Type:
Unleaded Premium Gasoline (98 RON / 93+ AKI)
Bore X Stroke:
85 mm x 79 mm
Compression Ratio:
11.2:1
Cooling System:
Water-cooled, pressurized system with twin radiators.
Transmission Type:
F1-Superfast Electro-Hydraulic Automated Manual (Paddle Shift)
Number Of Gears:
6-speed forward, 1 reverse
Gear Shifting Time:
Approximately 100 milliseconds in Sport mode.
Clutch Type:
Twin-plate dry clutch
Gearbox Oil Specification:
Refer to manual for specific OEM fluid or equivalent GL-4 75W-90 synthetic gear oil. Capacity typically around 2.7 - 3.0 Liters.
Length:
Approximately 4477 mm (176.26 in)
Width:
Approximately 1971 mm (77.60 in) (excluding mirrors)
Height:
Approximately 1270 mm (50.00 in)
Wheelbase:
Approximately 2600 mm (102.36 in)
Curb Weight:
Approximately 1280 kg (2822 lbs) (dry weight, significantly lighter than standard 360)
Gross Vehicle Weight Rating:
Refer to vehicle placard.
Front Wheel Size:
18 x 7.5J
Rear Wheel Size:
18 x 10J
Front Tire Size:
225/35 ZR18
Rear Tire Size:
275/40 ZR18
Wheel Bolt Pattern:
5x108
Crash Test Ratings:
Not typically subjected to standardized crash tests like mass-produced vehicles. Safety primarily relies on structural integrity and active systems.
Traction Control:
ASR (Anti-Slip Regulation) and F1-Trac (Traction Control System)
Stability Control:
E-Diff (Electronic Differential) and ABS (Anti-lock Braking System)
Braking Assistance:
EBD (Electronic Brake-force Distribution)
Airbags:
Driver and passenger front airbags (standard for the era, though some specialized vehicles may have fewer).
Chassis Construction:
Aluminum spaceframe chassis for high rigidity and low weight.
Major Service Interval:
Typically every 12,000 miles (20,000 km) or 12 months, whichever comes first. Includes cambelt replacement (crucial for this engine).
Oil Change Interval:
Every 12 months or 12,000 miles, or more frequently for spirited driving. Refer to manual for specific guidance.
Engine Oil Specification:
Refer to manual for specific OEM fluid or equivalent SAE 5W-40 synthetic engine oil meeting Ferrari specifications.
Coolant Specification:
Pre-mixed coolant with a high boiling point and anti-corrosion properties (e.g., Shellgard).
Brake Fluid Specification:
DOT 4 or DOT 5.1 high-performance synthetic brake fluid.
Engine Oil Capacity:
Approximately 10.5 Liters (11.1 US Quarts)
Known Issues:
Potential issues can include sticky exhaust valves, F1 gearbox actuator issues, early wear on certain suspension components, and electrical gremlins if not maintained properly. Cambelt service is critical and expensive.
Cambelt Part Number Example:
Refer to specific VIN-based parts catalog or manual for exact cambelt and tensioner part numbers (e.g., possibly 177486).
Engine Oil Filter Part Number Example:
Refer to specific VIN-based parts catalog or manual (e.g., Mann Filter W940/34 or equivalent).
Brand Heritage:
Ferrari has a storied history in motorsport and luxury sports car manufacturing, known for its passion, performance, and innovation.
Model Evolution:
The 360 Challenge Stradale evolved from the standard 360 Modena and 360 Challenge race car, incorporating track-focused enhancements for a more visceral driving experience.
Production Location:
Maranello, Italy
Production Volume:
Limited production run, with approximately 1200 units produced worldwide.