Positioning:
A stylish and performance-oriented coupe that offered a more accessible alternative to premium sports cars, blending Italian design with everyday usability.
Competitors:
Competed against models like the Toyota Celica, Nissan 240SX (Silvia), Ford Probe, and various European coupes of its era.
Design Language:
Distinctive wedge-shaped styling with a distinctive 'L'-shaped side indentation, designed by Chris Bangle.
Performance Variants:
Available with naturally aspirated and turbocharged engines, offering a range of performance levels, with the 20V Turbo being the most potent.
Demographic:
Enthusiasts and drivers seeking a visually striking, sporty coupe with accessible performance.
Product Name:
Fiat Coupe 1993-2000 Workshop Manual
Coverage Years:
1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Applicable Models:
All Fiat Coupé variants produced between 1993 and 2000
Page Count:
Comprehensive (Specific number not provided in description, assumed extensive for workshop manual)
Manual Type:
Workshop Manual / Service Manual / Repair Manual
Format:
Digital (likely PDF)
Engine Mechanical:
Engine overhaul, timing belt replacement, cylinder head, pistons, crankshaft, lubrication system, cooling system
Engine Management:
Fuel injection systems (MPI, Turbocharged), ignition system, electronic control units (ECU), sensor diagnostics, emissions control
Transmission Manual:
Clutch, gearbox overhaul, gear shifting mechanisms, drive shafts
Transmission Automatic:
Automatic transmission service and repair (if applicable for specific models)
Brakes:
Brake system diagnosis, ABS system, brake fluid replacement, caliper, disc, and pad service, parking brake
Suspension Steering:
Front and rear suspension components, shock absorbers, springs, bushings, power steering system, wheel alignment
Electrical System:
Battery, charging system, starter motor, lighting system, dashboard instruments, body control modules, wiring diagrams
Body Interior:
Bodywork repair, panel replacement, doors, windows, locks, interior trim, seats, heating, ventilation, and air conditioning (HVAC)
Diagnostics Troubleshooting:
Fault finding procedures, diagnostic trouble codes (DTCs), troubleshooting flowcharts
Scheduled Maintenance:
Oil changes, filter replacements, spark plug replacement, fluid checks, belt inspections
Major Repairs:
Engine rebuild, transmission overhaul, suspension component replacement, brake system overhaul
Component Replacement:
Alternator, starter motor, fuel pump, radiator, water pump, CV joints
Diagnostic Procedures:
Testing sensors, checking fuel pressure, diagnosing electrical faults
Depth:
Comprehensive, covering from basic maintenance to complete engine and transmission rebuilds, including detailed wiring diagrams and diagnostic procedures.
Engine Variants:
1.8L 16V (130 PS), 2.0L 16V (139 PS), 2.0L 16V Turbo (220 PS), 2.0L 20V (155 PS), 2.0L 20V Turbo (220 PS)
Horsepower Range:
130 PS to 220 PS
Torque Range:
164 Nm to 310 Nm (for 20V Turbo)
Injection Type:
Multi-point fuel injection (MPI), Turbocharged direct injection (for turbo models)
Configuration:
Inline-4 (1.8L, 2.0L 16V), Inline-5 (2.0L 20V)
Common Engine Codes:
836A3.000 (2.0 16V), 175A1.000 (2.0 16V Turbo), 175B1.000 (2.0 20V), 841C.000 (1.8 16V)
Transmission Type:
5-speed manual transmission
Transmission Type:
4-speed automatic transmission (less common)
Drivetrain:
Front-wheel drive (FWD)
Gear Ratios:
Specific ratios vary by engine and gearbox; manual provides detailed charts.
Manual Gearbox Oil:
API GL-4 SAE 75W-90 synthetic gear oil (refer to manual for specific Fiat specifications).
Automatic Gearbox Oil:
Dexron II/III equivalent (check manual for exact spec).
Length:
Approx. 4285 mm (168.7 in)
Width:
Approx. 1770 mm (69.7 in)
Height:
Approx. 1350 mm (53.1 in)
Wheelbase:
Approx. 2530 mm (99.6 in)
Curb Weight:
Approx. 1240 - 1360 kg (2734 - 2998 lbs) depending on engine and specification.
Trunk Volume:
Approx. 260 liters (9.2 cu ft)
Crash Test Results:
No specific official crash test ratings like Euro NCAP or NHTSA are readily available for this model from its era, but it was built to contemporary European safety standards.
ABS:
Anti-lock Braking System (ABS) available on most models, standard on higher trims and turbo variants.
Airbags:
Driver airbag standard, passenger airbag optional or standard on later models.
Seatbelts:
Pre-tensioning front seatbelts.
Oil Change Interval:
Every 15,000 km (9,300 miles) or 1 year, whichever comes first. (Consult manual for specific engine/oil type recommendations).
Timing Belt Replacement:
Recommended every 60,000 - 80,000 km (37,000 - 50,000 miles) or 4-5 years, depending on engine variant. Crucial for engine longevity; failure can cause catastrophic damage.
Spark Plug Replacement:
Every 30,000 - 40,000 km (18,600 - 25,000 miles), depending on plug type.
Brake Fluid Replacement:
Every 2 years.
Engine Oil:
Refer to manual for specific viscosity (e.g., 10W-40, 15W-50) and API/ACEA specifications. Synthetic recommended for turbocharged variants.
Coolant:
Ethylene glycol based coolant with corrosion inhibitors. Typically a 50/50 mix with distilled water.
Power Steering Fluid:
ATF (Automatic Transmission Fluid) Type T-IV or equivalent (check manual).
Common Problems:
Turbocharger reliability issues on early models, potential for suspension component wear (bushings, ball joints), electrical gremlins (especially window regulators, central locking), rust on sills and wheel arches, catalytic converter failure on high-mileage vehicles, interior trim degradation.
Performance Tuning Considerations:
Turbocharged models respond well to tuning, but ensure supporting modifications (exhaust, intercooler, ECU remapping) are done correctly to avoid premature wear.
Fiat Performance Heritage:
Fiat has a long history of producing sporty and stylish cars, including iconic models like the Fiat Dino and the Fiat X1/9, setting a precedent for performance-oriented coupes.
Design Origin:
Conceived as a more distinctively styled alternative to the Fiat Tipo, it shared its platform but boasted a unique exterior designed by Chris Bangle and an interior by Leonardo Fioravanti.
Production Period:
1993 - 2000
Manufacturing Location:
Turin, Italy
Production Volume:
Over 130,000 units produced globally.
