Engine Mechanical:
Complete engine disassembly, inspection, repair, and reassembly for all engine options. Includes cylinder head, block, crankshaft, pistons, connecting rods, camshafts, timing systems, lubrication, and cooling systems.
Fuel System:
Fuel delivery, fuel pump, fuel injectors, fuel pressure testing, evaporative emission control (EVAP), and fuel tank service.
Ignition System:
Spark plugs, ignition coils, ignition timing, and related sensors.
Exhaust System:
Exhaust manifolds, catalytic converters, mufflers, oxygen sensors, and emissions control components.
Transmission Manual:
Service and repair for the automatic transmission, including fluid changes, torque converter service, internal component repair, and valve body diagnostics.
Drivetrain:
Front-wheel drive (FWD) and all-wheel drive (AWD) systems, including axles, CV joints, driveshafts, and differentials.
Brakes:
Hydraulic brake system, ABS (Anti-lock Braking System), traction control, brake fluid, brake lines, calipers, rotors, pads, parking brake.
Suspension:
Front and rear suspension components, struts, shock absorbers, control arms, ball joints, bushings, and wheel alignment specifications.
Steering:
Power steering system, steering column, steering rack, tie rods, and power steering fluid.
Electrical System:
Battery, charging system (alternator), starting system (starter motor), fuses, relays, wiring diagrams, lighting systems (headlamps, taillamps, interior lights).
Body And Frame:
Body panel removal and installation, door mechanisms, glass replacement, interior trim, and structural components.
HVAC:
Heating, Ventilation, and Air Conditioning (HVAC) system, refrigerant charging, compressor service, blower motor, heater core, and A/C diagnostics.
Restraints:
Airbag system operation, seat belt mechanisms, and related sensors.
Diagnostics:
On-Board Diagnostics (OBD-II) system, diagnostic trouble codes (DTCs), scan tool usage, and troubleshooting procedures for various systems.
Preventative Maintenance:
Detailed schedules and procedures for oil changes, filter replacements, fluid checks, tire rotations, and inspections.
Troubleshooting:
Systematic diagnostic flowcharts and symptom-based troubleshooting guides for common and complex issues.
Component Replacement:
Step-by-step instructions for replacing major and minor components across all vehicle systems.
Rebuilding Procedures:
Complete overhaul procedures for engines, transmissions, and other major mechanical assemblies.
Wiring Diagrams:
Comprehensive electrical schematics for all vehicle circuits, including power distribution, signal paths, and component locations.
Specifications And Tolerances:
Detailed torque specifications, clearance measurements, and critical tolerances for all repair procedures.
Depth:
Factory-level diagnostic and repair information, covering everything from basic maintenance to complete drivetrain and electrical system overhauls.
Oil Change Interval:
Every 7,500 miles or 6 months, or sooner under severe driving conditions. Consult manual for specific oil type and capacity (e.g., 5W-20 synthetic blend for 3.5L).
Air Filter Replacement:
Inspect every 15,000 miles, replace as needed. Typically every 30,000 miles.
Cabin Air Filter:
Replace annually or every 15,000 miles.
Transmission Fluid:
Inspect periodically. Replace every 60,000 miles under normal use, or 30,000 miles under severe use.
Engine Oil Capacity 3.5L:
6.5 quarts (with filter)
Engine Oil Capacity 2.5L:
4.5 quarts (with filter)
Coolant:
Ford Premium All Season Concentrate (Orange) or equivalent meeting specification WSS-M97B44-D
Common Complaints:
Potential for AC system issues (compressor leaks), some reports of transmission shifting concerns, and occasional suspension component wear (bushings, struts).