Target Audience:
Farm owners, agricultural mechanics, service technicians, and DIY enthusiasts for Ford New Holland 40 Series tractors.
Value Proposition:
Provides comprehensive, factory-level information to enable efficient maintenance, repair, and troubleshooting, saving costs on professional service.
Content Scope:
Covers a wide array of systems and components, from basic maintenance to complex rebuilds.
Accessibility:
Instant digital download after purchase, accessible on multiple devices.
Quality Assurance:
Produced by the manufacturer or equivalent quality, offering authentic repair guidance.
User Friendliness:
Designed for both professional mechanics and DIY users with clear, illustrated, step-by-step instructions.
Engine Systems:
Engine Cooling, Fuel System (General, Air Cleaner - Dry/Wet, Injectors, Fuel Pump, Turbocharger)
Electrical Systems:
Instrument Cluster, Wiring Diagrams, AIC & AEIC, Alternators, Starter Motors, Batteries, General Electrics, EIC Fault Finding (Post Nov. 1995)
Drivetrain Systems:
Clutches, Transmission Systems (16x16, 12x12, 8x2, 8x2 Dual Power, 8x2 Reduction Gearbox, 12x12 Dual Power, 16x16 'Quad Mod'), Transmission Fault Finding & Calibrations (Post Nov. 1995)
Power Take Off:
Independent Power Take Off (I.P.T.O.) Systems
Axle And Brake Systems:
Rear Axles, Brakes, Front Axles (Two Wheel Drive, Four Wheel Drive), Transfer Box (8x2 Transmission), New Holland Class 2 & 3 Four Wheel Drive Axles
Hydraulic Systems:
Introduction, Closed Centre Load Sensing (CCLS) Pump, Electrolink (Electronic Draft Control) with CCLS Pump, Hydraulic Lift Assembly with Top Link Sensing, Fixed Displacement Gear Type Pumps, Hydraulic Trailer Brakes, Remote Control Valves, Assist Rams, Electrolink with Fixed Displacement Hydraulic Pump, Electrolink Fault Finding & Calibration (Post Nov. 1995)
Steering Systems:
Hydrostatic Steering Systems
Cab Systems:
Air Conditioning (Sanden SD7H15 Compressor Overhaul)
Tractor Separation:
Safety Cab & Platform Removal, Vehicle Separation
Wheel Drive Axles:
Specific sections for Two Wheel Drive and Four Wheel Drive front axles, as well as New Holland Class 2 and 3 Four Wheel Drive Axles.
Braking System Detail:
In-depth coverage of braking systems including hydraulic trailer brakes.
Repair Procedures:
Complete step-by-step instructions for repair, service, restoration, rebuilding, and diagnosis of all covered systems.
Maintenance Procedures:
Preventative maintenance, routine servicing, and component upkeep.
Troubleshooting:
Extensive troubleshooting guides for immediate problem resolution.
Calibration:
Specific calibration procedures for transmissions (Post Nov. 1995) and Electrolink systems (Post Nov. 1995).
Overhaul Procedures:
Includes detailed overhaul procedures for key components like the Sanden SD7H15 Air Conditioning compressor.
Component Replacement:
Covers replacement procedures for all major components listed within the system coverage.
Depth Of Information:
Highly detailed, suitable for professional technicians, mechanics, workshops, and experienced DIY users.
Diagnostic Capabilities:
Comprehensive fault finding sections, particularly for post-November 1995 models regarding transmissions and Electrolink systems.
File Compression:
May be zipped (.zip, .rar) requiring extraction software (e.g., WinZip, WinRAR).
Compatibility:
Compatible with all operating systems (Windows, Linux, Mac) and PDF readers.
File Size:
Can be very large, up to 4000 MB; sufficient storage space recommended.
Printability:
Printable on any computer and printer.
Illustrations:
Illustrated with clear, step-by-step instructions; includes zoomable illustrations, detailed component explosions, and exploded views.
Exploded Views:
Features detailed exploded views of components for easier identification and assembly/disassembly.
Binding Type:
Digital Download (Not a hard copy)
Paper Type:
N/A (Digital)
Text Searchability:
Likely searchable text within PDF (depending on OCR quality if scanned).
Engine Type:
Likely direct-injection, naturally aspirated or turbocharged diesel engines (specifics vary by model within the series).
Engine Displacements Approximate:
Ranges typically include 3.9L to 6.0L depending on specific model (e.g., 5640, 8340).
Horsepower Range:
Approximate horsepower: 5640 (~65-75 HP), 6640 (~75-85 HP), 7740 (~85-95 HP), 7840 (~95-105 HP), 8240 (~105-115 HP), 8340 (~115-125 HP).
Torque Specifications:
Detailed torque specifications for engine components are included in the manual.
Fuel System Components:
Includes coverage of fuel pump, injectors, fuel filter, and turbocharger (if applicable) with diagnostic and repair procedures.
Standard Transmission Options:
8x2, 12x12, and 16x16 transmission configurations available across the series.
Optional Transmission Features:
Dual Power assemblies and 'Quad Mod' transmissions for enhanced operational flexibility.
Transmission Coverage:
Detailed procedures for assembly, disassembly, fault finding, and calibration for all listed transmission types.
Overall Dimensions:
Specific dimensions (length, width, height) vary by model and configuration, detailed within the manual.
Operating Weight:
Operating weights vary significantly by model, typically ranging from 3,500 kg to 5,500 kg (unladen).
Gross Vehicle Weight:
Gross Vehicle Weight (GVW) ratings are specified for safe operation and load capacity.
Cab Features Tech:
While primarily functional, the inclusion of air conditioning (Sanden SD7H15) represents a significant comfort technology for its era.
Electronic Draft Control:
The 'Electrolink' system is a key technological feature for precise implement control, with detailed diagnostic and calibration procedures in the manual.
Electrical Instrumentation:
The manual details instrument clusters and associated wiring, essential for understanding tractor operational status and diagnostics.
Engine Oil Change Interval:
Typical intervals are 250 hours or annually, with specific recommendations in the manual.
Transmission Fluid Change Interval:
Intervals vary by transmission type and operating conditions, detailed in the manual.
Engine Oil Specification:
API CG-4 or CH-4, SAE 15W-40 (or 10W-30 in colder climates) are common, specific part numbers and grades in manual.
Hydraulic Fluid Specification:
Ford New Holland specialized hydraulic/transmission fluid (e.g., NH 134) or equivalent UTF (Universal Tractor Transmission Fluid) is typically required. Capacities vary by model and option (e.g., 38-50 liters).
Coolant Specification:
Ethylene glycol-based antifreeze with corrosion inhibitors, typically a 50/50 mix with distilled water. Specific concentrations and types detailed.
Transmission Oil Specification:
If separate from hydraulic fluid, specific transmission oils like SAE 80W-90 GL-4 are often used. Manual will specify.
Common Wear Items:
Clutch wear, hydraulic pump performance degradation, starter motor issues, and minor electrical faults can occur with age and usage.
Transmission Quirks:
Fault finding for Dual Power engagement and 'Quad Mod' calibrations may be required periodically. The manual's detailed troubleshooting is invaluable here.
Electrolink Diagnostics:
Electrolink system fault finding and calibration procedures are specifically addressed, indicating this can be a complex area requiring technical guidance.
