Engine Operation:
Detailed explanation of engine functions, starting and stopping procedures.
Drive System:
Information on hydrostatic transmission operation, forward/reverse control, speed adjustment.
Cutting Deck:
Instructions for deck height adjustment, blade engagement, cleaning, and maintenance.
Operator Controls:
Identification and function of all levers, pedals, and switches.
Safety Features:
Explanation of safety interlocks, operator presence control, and recommended safety practices.
Pre Operation Checks:
Guidance on checking fluid levels (oil, fuel), tire pressure, and general machine condition before use.
Routine Maintenance:
Instructions for air filter cleaning/replacement, spark plug maintenance, oil changes, and grease points.
Troubleshooting Basic:
Common issues and potential solutions for starting problems, operational difficulties, and performance issues.
Storage Procedures:
Guidance on proper long-term storage, including fuel stabilization and battery care.
Depth Level:
Covers essential owner-level maintenance, safe operation, and basic troubleshooting.
Engine Manufacturer:
Briggs & Stratton
Engine Model Series:
Professional Series (likely Intek or similar)
Engine Displacement:
Approximately 17 Gross HP (Horsepower varies by specific engine model)
Horsepower:
Rated at 17 HP (Gross)
Fuel Type:
Unleaded Gasoline
Fuel Tank Capacity:
Approximately 2.0 - 2.5 Gallons (varies slightly by year/configuration)
Cooling Method:
Air-Cooled
Oil Type:
SAE 30W or 10W-30 (Refer to manual for exact specification based on ambient temperature)
Oil Capacity:
Approximately 1.5 Quarts (US)
Transmission Type:
Hydrostatic (e.g., Tuff Torq K46 or similar)
Drive Mechanism:
Belt-driven hydrostatic drive with pedal control.
Speed Control:
Variable speed, forward and reverse via foot pedal.
Transmission Fluid Type:
Typically SAE 20W-50 or specified synthetic hydrostatic fluid (refer to manual for exact spec).
Cutting Width:
42 inches (107 cm)
Deck Type:
Stamped steel, side-discharge deck.
Approximate Shipping Weight:
Around 450-500 lbs (excluding attachments and fluids).
Operator Station Type:
Step-through chassis design.
Safety Compliance:
Designed to meet ANSI/ASAE safety standards.
Operator Presence Control:
Engine/deck disengages if operator leaves seat.
Parking Brake:
Yes, typically a mechanical caliper brake.
Roll-Over Protection:
Not typically equipped with a ROPS (Roll-Over Protective Structure); user must operate safely.
Engine Oil Change:
Every 50 operating hours or annually, whichever comes first.
Air Filter Maintenance:
Check and clean after every 25 operating hours or annually; replace as needed.
Spark Plug Replacement:
Annually or every 100 operating hours.
Hydraulic Fluid:
Refer to manual for specific hydrostatic transmission fluid and capacity (e.g., SAE 20W-50, ISO VG 68 or equivalent).
Grease Type:
General purpose lithium-based grease.
Common Wear Items:
Deck belt, drive belt, blades, hydrostatic transmission fluid, battery.
Potential Problems:
Overheating if cooling fins are blocked, hydrostatic transmission wear if fluid is neglected.
Air Filter Part Number Example:
Briggs & Stratton 796031 (verify with engine model)
Oil Filter Part Number Example:
Briggs & Stratton 695304 (verify with engine model)
Spark Plug Part Number Example:
Champion RC12YC or equivalent (verify with engine model)
Brand Focus:
Husqvarna is a Swedish brand with a long history in outdoor power equipment, known for durability and performance.
Series Placement:
The LTH series generally represents Husqvarna's mid-range lawn tractors, offering a balance of features and value.
Likely Production Years:
Likely manufactured in the mid-2000s to early 2010s (specific year not provided, but model designation suggests this era).
