Segment:
Enduro / Dual-Sport Motorcycle
Target Audience:
Husqvarna owners, independent repair shops, enthusiasts
Competitors:
KTM EXC Series, Yamaha WR Series, Honda CRF-X Series, Suzuki DR-Z Series
Manual Value:
Essential for maintaining peak performance, reliability, and safety
Manual Utility:
Empowers owners and technicians with detailed, accurate repair information
Engine:
Comprehensive engine overhaul, tuning, and diagnostics
Fuel System:
Fuel injection system, carburetor (if applicable), fuel pump, lines, filters
Ignition System:
Ignition coil, spark plug, CDI unit, timing
Transmission:
Clutch assembly, gearbox internals, shifting mechanism, lubrication
Cooling System:
Radiator, coolant, water pump, fan operation
Exhaust System:
Muffler, header pipe, catalytic converter (if applicable)
Suspension Front:
Fork overhaul, seal replacement, damping adjustment
Suspension Rear:
Shock absorber service, linkage maintenance, spring adjustment
Brakes Front:
Brake caliper service, rotor inspection, master cylinder overhaul, fluid bleeding
Brakes Rear:
Brake caliper service, rotor inspection, master cylinder overhaul, fluid bleeding
Electrical System:
Wiring diagrams, component testing, battery maintenance, lighting system
Frame Chassis:
Frame inspection, swingarm service, steering head bearing replacement
Bodywork Trim:
Panel removal and installation, seat, fenders
Maintenance:
Routine checks, fluid changes, filter replacements, lubrication points
Troubleshooting:
Diagnostic charts, common problems and solutions, error code interpretation
Repair:
Step-by-step instructions for component disassembly, repair, and reassembly
Overhaul:
Detailed procedures for major component overhauls (engine, transmission, suspension)
Diagnostics:
Electrical system diagnostics, engine performance testing
Specifications Torque:
Torque specifications for all critical fasteners
Schematics:
Detailed wiring diagrams and service schematics
Level:
Professional Technician Level
Detail Level:
Comprehensive, including internal component specifications and tolerances
Engine Type:
Single-cylinder, 4-stroke
Displacement:
449.7 cc (approx.)
Bore X Stroke:
97 mm x 60.8 mm (approx.)
Compression Ratio:
11.8:1 (typical)
Horsepower:
Approx. 40-45 HP (at crankshaft)
Torque:
Approx. 30-35 Nm (at crankshaft)
Fuel Delivery:
Electronic Fuel Injection (EFI) - Mikuni or similar
Fuel Type:
Unleaded gasoline, minimum 91 octane (RON+MON)/2
Oil Type:
SAE 10W-40, JASO MA certified motorcycle oil
Oil Capacity:
Approx. 1.5 - 1.7 Liters (check manual for exact)
Type:
6-speed constant mesh
Clutch:
Wet multi-plate, hydraulic actuation
Gear Ratios:
Specific ratios detailed within the manual
Final Drive:
O-ring sealed chain, 520 pitch
Transmission Oil Type:
SAE 75W-90, API GL-4 or GL-5 transmission oil
Transmission Oil Capacity:
Approx. 0.8 - 1.0 Liters (check manual for exact)
Crash Test Results:
N/A (Off-road motorcycle, not subjected to standard automotive crash tests)
Braking System:
Hydraulic disc brakes front and rear
Lighting:
Headlight, taillight, brake light, turn signals (depending on trim/market)
Frame Construction:
High-strength steel or aluminum alloy frame
Dashboard:
Digital display with odometer, trip meter, engine hour meter, clock, basic warning lights
ABS:
Not equipped with Anti-lock Braking System (ABS)
Traction Control:
Not equipped with Traction Control
Bluetooth Usb:
No factory-equipped Bluetooth or USB connectivity
Oil Change Interval:
Every 10-15 hours of riding or annually (whichever comes first)
Air Filter Cleaning:
Every 5-10 hours of riding or as needed based on conditions
Spark Plug Inspection:
Every 20-30 hours of riding
Valve Clearance Check:
Every 40-60 hours of riding or annually
Engine Oil:
SAE 10W-40, JASO MA certified motorcycle oil
Transmission Oil:
SAE 75W-90, API GL-4 or GL-5
Coolant:
Ethylene glycol based antifreeze, 50/50 mix with distilled water
Brake Fluid:
DOT 4 (or DOT 3 if specified for older components)
Common Wear Items:
Clutch plates, wheel bearings, steering head bearings, fork seals
Potential Electrical:
Wiring harness durability in harsh off-road conditions, regulator/rectifier issues
Engine Performance:
Sensitivity to air filter cleanliness and proper fueling, potential for oil consumption if not maintained
Suspension:
Need for regular fork oil changes and seal maintenance
Manufacturer:
Husqvarna Motorcycles, founded in Sweden in 1903
Te Series:
The TE (Trophy Enduro) series represents Husqvarna's long-standing heritage in off-road competition and adventure riding.
2010 Updates:
The 2010 model featured refinements to the engine, chassis, and suspension, often building upon previous generations' success.
Manufacturing Location:
Italy (under BMW ownership during this period)
