Engine:
Comprehensive coverage including disassembly, assembly, inspection, diagnosis, and repair for all engine variants.
Engine Management:
Detailed information on ECU, sensors, actuators, ignition system, fuel injection system, emission controls, and diagnostic trouble codes (DTCs).
Transmission Manual:
Full repair procedures for manual transmissions, including clutch, gear selection, and internal component overhauls.
Transmission Automatic:
Complete diagnostic and repair instructions for automatic transmissions, including hydraulic systems, torque converter, and electronic controls.
Drivetrain:
Coverage of front-wheel drive systems, including CV joints, drive axles, and differential components.
Suspension:
Detailed procedures for front and rear suspension systems, including struts, shock absorbers, control arms, bushings, and alignment specifications.
Steering:
Repair and diagnosis of power steering systems (hydraulic or electric), steering rack, tie rods, and steering column components.
Brakes Hydraulic:
Complete brake system overhaul, including master cylinder, brake lines, calipers, wheel cylinders, and brake fluid specifications.
Brakes ABS Esp:
Diagnostic procedures and repair information for Anti-lock Braking System (ABS) and Electronic Stability Program (ESP) components, including wheel speed sensors and hydraulic control units.
Body And Chassis:
Body panel removal and installation, structural repair, door mechanisms, hinges, latches, and weatherstripping.
Electrical System:
Comprehensive wiring diagrams, component locations, testing procedures for starting and charging systems.
Lighting System:
Headlights, taillights, interior lighting, fog lights, and related electrical circuits and bulb specifications.
HVAC System:
Air conditioning system diagnosis and repair, heater core, blower motor, refrigerant handling, and climate control system components.
Interior Trim:
Removal and installation of dashboard components, door panels, headliner, seats, and trim pieces.
Fuel System:
Fuel pump, fuel filter, fuel injectors, fuel tank, and fuel pressure testing.
Exhaust System:
Exhaust manifold, catalytic converter, mufflers, exhaust pipes, and hanger replacement.
Cooling System:
Radiator, water pump, thermostat, cooling fans, hoses, and coolant specifications.
Safety Restraints:
Airbag system diagnosis and repair, seat belts, and SRS component replacement.
Routine Maintenance:
Oil changes, filter replacements, fluid checks and top-offs, tire rotations, and inspection procedures.
Troubleshooting Diagnostics:
Step-by-step diagnostic flowcharts and symptom-based troubleshooting guides for various vehicle systems.
Component Replacement:
Detailed instructions for replacing virtually all mechanical and electrical components.
Engine Rebuilding:
Complete procedures for engine disassembly, cleaning, inspection, machining, and reassembly.
Transmission Overhaul:
In-depth instructions for disassembling, inspecting, and rebuilding both manual and automatic transmissions.
Electrical Diagnostics:
Techniques for diagnosing electrical faults using multimeters, oscilloscopes, and wiring diagrams.
Specifications And Tolerances:
Precise measurements, clearances, torque values, and other critical specifications for all components.
Torque Specifications:
Comprehensive list of all fastener torque values for engine, chassis, and body components.
Wiring Diagrams:
Detailed, easy-to-read wiring diagrams for all electrical systems.
Depth Level:
Comprehensive: Covers everything from basic maintenance to complete engine and transmission overhauls, including advanced diagnostics.
Engine Code Gasoline 1:
G4GC / G4CD (2.0L CVVT DOHC)
Engine Displacement Gasoline 1:
1975 cc
Engine Power Gasoline 1:
Approx. 143-145 hp (107-108 kW) @ 6000 rpm
Engine Torque Gasoline 1:
Approx. 185-190 Nm (136-140 lb-ft) @ 4500 rpm
Engine Code Diesel 1:
D4EA (2.0L CRDi VGT DOHC)
Engine Displacement Diesel 1:
1991 cc
Engine Power Diesel 1:
Approx. 113-140 hp (84-104 kW) @ 4000 rpm (varies by tune)
Engine Torque Diesel 1:
Approx. 255-305 Nm (188-225 lb-ft) @ 1800-2500 rpm (varies by tune)
Fuel Type:
Unleaded Gasoline / Diesel
Fuel Delivery:
Multi-point Fuel Injection (MPI) for gasoline, Common Rail Direct Injection (CRDi) for diesel.
Oil Change Interval:
Typically every 7,500 miles (12,000 km) or 6 months, whichever comes first. Refer to manual for specific grade and Severe Duty schedules.
Air Filter Replacement:
Approximately every 30,000 miles (48,000 km), or sooner if driving in dusty conditions.
Cabin Air Filter:
Typically every 15,000 miles (24,000 km) or annually.
Spark Plugs Gasoline:
Iridium spark plugs generally rated for 60,000 - 100,000 miles (96,000 - 160,000 km).
Timing Belt Chain:
Engines typically use timing chains, which are generally maintenance-free for the life of the engine. Confirm via manual.
Engine Oil Type:
Refer to manual for API service classification (e.g., API SM or SN) and viscosity grade (e.g., 5W-20, 5W-30).
Coolant Type:
Ethylene glycol-based antifreeze. Refer to manual for specific type and color (e.g., OAT or HOAT).
Brake Fluid Type:
DOT 3 or DOT 4 brake fluid.
Power Steering Fluid:
Refer to manual; typically ATF Dexron III or equivalent for hydraulic systems.
Engine Performance:
Occasional reports of rough idle or check engine lights due to sensor issues (e.g., MAF, O2 sensors) or minor oil leaks.
Transmission Smoothness:
Some users report occasional harsh shifts in the automatic transmission; proper fluid maintenance is crucial.
Suspension Noises:
Front suspension components like sway bar links and bushings can wear over time, leading to clunking noises.
Electrical Quirks:
Minor electrical issues such as window motor failures or HVAC control panel malfunctions can occur.
Brake Wear:
Normal wear and tear; regular inspection and replacement of pads and rotors is recommended.
