Engine Mechanical:
Engine assembly, cylinder head, block, crankshaft, pistons, connecting rods, lubrication system, cooling system, timing system.
Engine Performance:
Fuel system, ignition system, emission control systems, engine management (ECM/ECU).
Transmission:
Manual and Automatic transmission disassembly, assembly, diagnosis, and repair.
Drivetrain:
Front-wheel drive system, drive shafts, CV joints, differential.
Suspension:
Front and rear suspension systems, struts, shock absorbers, control arms, bushings, wheel alignment specifications.
Steering:
Power steering system (hydraulic or electric), steering rack, tie rods, steering column.
Brakes:
Brake system components (discs, pads, calipers, master cylinder, brake lines), ABS system diagnosis and repair, parking brake.
Body And Frame:
Exterior body panels, doors, hood, trunk, bumpers, chassis structure, corrosion protection.
Interior:
Interior trim, seats, dashboard, HVAC system controls, airbags.
Electrical System:
Battery, charging system, starting system, lighting, wipers, horn, power windows, central locking.
Climate Control:
HVAC system diagnosis, refrigerant handling, heater core, evaporator, blower motor.
Safety Systems:
Airbag system diagnosis and repair, seat belt mechanisms.
Diagnostics And Troubleshooting:
Diagnostic trouble codes (DTCs), symptom-based troubleshooting, wiring diagrams.
Preventative Maintenance:
Oil changes, filter replacements, fluid checks and top-offs, spark plug replacement, belt inspection and replacement.
Repair Procedures:
Step-by-step instructions for component removal, installation, and adjustment.
Diagnostic Procedures:
Methods for identifying and resolving faults within various vehicle systems.
Electrical Troubleshooting:
Detailed wiring diagrams, circuit testing, component diagnosis.
Engine Rebuilding:
Instructions for engine disassembly, inspection, repair, and reassembly, including torque specifications and clearances.
Transmission Overhaul:
Detailed procedures for disassembling, inspecting, repairing, and reassembling both manual and automatic transmissions.
Brake System Service:
Replacement of brake pads, rotors, fluid flushing and bleeding, ABS component service.
Suspension Component Replacement:
Installation and replacement of struts, shocks, ball joints, control arms.
Air Conditioning Service:
Refrigerant handling, component replacement, leak detection.
Depth:
Comprehensive (covers from basic maintenance to complete disassembly and rebuilds).
Diagnostic Tools Required:
Specifies diagnostic tools, scan tools (e.g., OBD-II scanner), and specialized equipment where necessary.
Special Tools:
Lists and illustrates any special tools required for specific procedures.
Engine Code:
G4FC (likely for 1.6L), G4KD (likely for 2.0L)
Engine Type:
Inline 4-cylinder, DOHC, 16-valve, CVVT (Continuously Variable Valve Timing)
Displacement 1.6L:
1591 cc
Horsepower 1.6L:
Approximately 124 hp @ 6300 rpm
Torque 1.6L:
Approximately 117 lb-ft @ 4200 rpm
Displacement 2.0L:
1998 cc
Horsepower 2.0L:
Approximately 156 hp @ 6200 rpm
Torque 2.0L:
Approximately 144 lb-ft @ 4300 rpm
Fuel Delivery:
Electronic Multi-Point Fuel Injection (MPI)
Fuel Type:
Unleaded gasoline
Coolant Type:
Ethylene Glycol based coolant (e.g., Mopar OAT, or equivalent meeting spec)
Oil Type 1.6L:
API SM or higher, SAE 5W-20
Oil Capacity 1.6L:
Approx. 4.1 quarts (3.9 liters) with filter
Oil Type 2.0L:
API SM or higher, SAE 5W-20 or 5W-30 (refer to manual for climate specifics)
Oil Capacity 2.0L:
Approx. 4.5 quarts (4.3 liters) with filter
Oil And Filter Change:
Every 7,500 miles (12,000 km) or 12 months, whichever comes first.
Engine Air Filter:
Inspect every 7,500 miles (12,000 km), replace as needed or every 22,500 miles (36,000 km).
Cabin Air Filter:
Replace every 15,000 miles (24,000 km) or 12 months.
Spark Plugs:
Replace at 105,000 miles (168,000 km) for Iridium type.
Transmission Fluid Auto:
Inspect every 7,500 miles (12,000 km), replace typically around 60,000-100,000 miles (96,000-160,000 km) depending on driving conditions.
Brake Fluid:
Replace every 24 months or 30,000 miles (48,000 km).
Coolant Capacity:
Approx. 5.5 quarts (5.2 liters)
Power Steering Fluid:
Refer to manual, typically ATF DEXRON III or equivalent if hydraulic.
Engine Consumption:
Some reports of increased oil consumption in certain engines, particularly with higher mileage. Regular checks are advised.
Suspension Noise:
Potential for worn sway bar links or bushings leading to clunking noises over bumps.
Cv Joint Wear:
Early wear of front CV joint boots can lead to grease leakage and eventual joint failure, especially in dusty or harsh environments.
Evaporative Emission Control System:
Issues with the EVAP system, such as a faulty purge valve or vent solenoid, can trigger check engine lights.
