Engine Mechanical:
Engine assembly, cylinder head, block, pistons, crankshaft, camshafts, timing system, lubrication system, cooling system
Engine Management:
Fuel injection, ignition system, emissions control, engine control module (ECM/ECU) diagnostics and repair, sensors and actuators
Transmission Manual:
Manual transmission internal components, clutch system, shifter mechanism, fluid specifications
Transmission Automatic:
Automatic transmission internal components, torque converter, valve body, electronic control unit (TCU), fluid specifications
Drivetrain:
Front-wheel drive (FWD) and all-wheel drive (AWD) systems, differentials, driveshafts, CV joints, transfer case (if applicable)
Suspension:
Front and rear suspension components, shock absorbers, struts, springs, control arms, ball joints, bushings, alignment specifications
Steering:
Power steering system (hydraulic or electric), steering rack, tie rod ends, steering column, wheel alignment
Brakes:
Front and rear brake systems (disc brakes), brake pads, rotors, calipers, brake lines, master cylinder, ABS (Anti-lock Braking System) components and diagnostics, parking brake
Electrical System:
Battery, charging system (alternator), starting system (starter motor), lighting systems (headlights, taillights, interior), fuses, relays, wiring diagrams
Body And Chassis:
Body panels, doors, hood, trunk, glass, bumpers, frame structure, corrosion protection
HVAC:
Heating, Ventilation, and Air Conditioning system components, refrigerant, compressor, evaporator, condenser, blower motor, climate control module
Infotainment And Electronics:
Audio system, navigation system, instrument cluster, power windows, power locks, mirrors, body control module (BCM) diagnostics
Routine Maintenance:
Oil changes, filter replacements, fluid checks and top-offs, tire rotation, spark plug replacement, air filter replacement
Troubleshooting:
Diagnostic procedures for common and uncommon faults, symptom-based troubleshooting charts, diagnostic trouble codes (DTCs)
Component Repair:
Detailed instructions for removing, disassembling, inspecting, repairing, and reassembling major vehicle components
Engine Rebuild:
Complete engine overhaul procedures, including torque specifications, bearing clearances, ring gap measurements, and gasket installation
Transmission Overhaul:
Detailed steps for automatic and manual transmission disassembly, overhaul, and reassembly
Brake Service:
Brake pad and rotor replacement, caliper service, brake fluid bleeding, ABS system bleeding and diagnostics
Electrical Diagnostics:
Troubleshooting electrical circuits, reading wiring diagrams, component testing, battery and charging system diagnostics
Suspension And Steering Repair:
Replacement of suspension and steering components, wheel alignment procedures
HVAC Service:
Refrigerant handling, component replacement (compressor, condenser), leak detection, system evacuation and recharging
Bodywork And Trim Removal:
Procedures for removing and installing interior and exterior trim, body panels, and related components
Diagnostic Capability:
Advanced diagnostics, including use of scan tools and interpretation of sensor data
Rebuild Level:
Complete engine and transmission rebuild specifications
Electrical Schematics:
Comprehensive wiring diagrams for all major systems
Torque Specifications:
Precise torque values for all critical fasteners
Clearances And Tolerances:
Detailed specifications for engine component clearances and manufacturing tolerances
Engine Code Gasoline:
G4KC (2.4L Theta I)
Engine Displacement Gasoline:
2.4 Liters (2359 cc)
Engine Configuration Gasoline:
Inline 4-cylinder, DOHC, 16 valves
Horsepower Gasoline:
Approximately 175 hp @ 6000 rpm
Torque Gasoline:
Approximately 168 lb-ft @ 4000 rpm
Engine Code Gasoline V6:
G6CU (3.3L Lambda I V6)
Engine Displacement Gasoline V6:
3.3 Liters (3342 cc)
Engine Configuration Gasoline V6:
V6, DOHC, 24 valves
Horsepower Gasoline V6:
Approximately 235 hp @ 6000 rpm
Torque Gasoline V6:
Approximately 225 lb-ft @ 4500 rpm
Engine Code Diesel:
D4EA (2.5L CRDi VGT)
Engine Displacement Diesel:
2.5 Liters (2497 cc)
Engine Configuration Diesel:
Inline 4-cylinder, DOHC, 16 valves, Common Rail Direct Injection (CRDi), Variable Geometry Turbocharger (VGT)
Horsepower Diesel:
Approximately 170 hp @ 4000 rpm
Torque Diesel:
Approximately 275 lb-ft @ 2000 rpm
Fuel Delivery Gasoline:
Electronic Multi-Point Fuel Injection (MPI)
Fuel Delivery Diesel:
Common Rail Direct Injection (CRDi)
Fuel Type:
Unleaded gasoline (2.4L, 3.3L), Diesel fuel (2.5L)
Length:
Approximately 187.7 inches (4768 mm)
Width:
Approximately 74.2 inches (1885 mm)
Height:
Approximately 68.3 inches (1735 mm)
Wheelbase:
Approximately 106.3 inches (2700 mm)
Cargo Volume Behind 3Rd Row:
Approximately 10.0 - 12.0 cubic feet (varies by configuration)
Cargo Volume Behind 2Nd Row:
Approximately 37.2 - 40.1 cubic feet
Cargo Volume Behind 1St Row:
Approximately 74.2 - 80.3 cubic feet
Curb Weight Range:
Approximately 3,700 - 4,200 lbs (1680 - 1905 kg), depending on engine and drivetrain
Towing Capacity:
Up to 3,500 lbs (1588 kg) with V6 engine and proper equipment
Oil Change Interval Gasoline:
Every 5,000 - 7,500 miles (8,000 - 12,000 km) or 6 months, whichever comes first (depending on driving conditions)
Oil Change Interval Diesel:
Every 5,000 miles (8,000 km) or 6 months, whichever comes first
Air Filter Replacement:
Every 30,000 miles (48,000 km) or as needed
Spark Plug Replacement Gasoline:
Every 60,000 - 100,000 miles (96,000 - 160,000 km) depending on spark plug type (iridium recommended)
Coolant Replacement:
Initial replacement at 100,000 miles (160,000 km), then every 50,000 miles (80,000 km)
Transmission Fluid Change Automatic:
Every 60,000 miles (96,000 km) or as needed based on driving conditions
Engine Oil Spec Gasoline:
SAE 5W-20 API SN/SM (refer to manual for exact specification and viscosity)
Engine Oil Spec Diesel:
SAE 5W-30 API CI-4 or CJ-4 (refer to manual for exact specification)
Coolant Spec:
Ethylene Glycol based, Long Life Coolant (Pink/Orange color typically) - Hyundai/Kia Blue Coolant or equivalent
Brake Fluid Spec:
DOT 3 or DOT 4 (refer to manual for specific recommendation)
Engine Sludge:
Some reports of engine oil sludge build-up in earlier models if oil changes were neglected. Regular maintenance is crucial.
Cv Joint Wear:
Front CV joints can experience wear over time, especially on AWD models used in demanding conditions.
Suspension Components:
Bushings and control arm components can wear, leading to noise or handling issues.
Diesel Particulate Filter Issues:
Diesel models may experience DPF regeneration issues if primarily used for short trips, leading to potential clogging.
Interior Rattles:
Some owners report minor interior rattles and squeaks developing over time.