Engine Service:
Engine overhaul, disassembly, assembly, component testing, cylinder head, block, crankshaft, pistons, camshafts, valves, timing.
Transmission Service:
Manual and Automatic Transmission overhaul, repair, diagnostics, fluid changes, clutch service.
Brake System:
Disc and drum brake systems, ABS diagnostics, caliper, rotor, pad replacement, hydraulic system service.
Electrical System:
Comprehensive electrical system diagnostics, wiring diagrams, component testing, starter, alternator, battery, lighting, power accessories.
Suspension:
Front and rear suspension components, struts, shock absorbers, control arms, ball joints, bushings, wheel alignment procedures.
Steering:
Power steering system, rack and pinion, steering column, tie rods, diagnostics.
Cooling System:
Radiator, water pump, thermostat, hoses, fan assembly, coolant types and capacities.
Fuel System:
Fuel tank, fuel pump, fuel injectors, fuel filter, fuel pressure testing, throttle body service.
Emission System:
Emission control devices, catalytic converter, EVAP system, EGR system, diagnostic procedures.
HVAC:
Heater core, evaporator, A/C system servicing, refrigerant handling, blower motor, climate control diagnostics.
Engine Control System:
ECU, sensors (MAF, O2, TPS, CKP, CMP), actuators, diagnostic trouble codes (DTCs).
Chassis Body:
Frame, body panels, doors, hoods, bumpers, glass replacement, rust repair.
Restraint System:
Airbag system diagnostics, seat belt mechanisms, SRS components.
Interior:
Dashboard, seats, trim panels, interior lighting, audio system.
Differential Drive:
Front-wheel drive system components, differential assembly, axle shafts.
Axle:
Front and rear axle components, CV joints, bearings.
Maintenance:
Scheduled maintenance, oil changes, filter replacements, fluid checks and top-offs, tune-ups.
Troubleshooting:
Systematic diagnostic procedures for common and uncommon problems, symptom-based troubleshooting guides.
Repair:
Step-by-step instructions for component removal, repair, and reinstallation, including detailed reassembly procedures.
Diagnostics:
Guidance on using diagnostic tools, interpreting scan data, and diagnosing electrical and mechanical issues.
Technical Detail Level:
Comprehensive, covering basic maintenance to complete engine and transmission rebuilds with detailed illustrations.
Diagnostic Procedures:
Detailed diagnostic flowcharts and procedures for electrical systems and component failures.
Illustrative Content:
Hundreds of photos, drawings, and diagrams to clarify procedures and component identification.
Oil Change Interval:
Typically every 7,500 miles (12,000 km) or 6 months, whichever comes first, under normal driving conditions. Consult manual for severe conditions.
Engine Air Filter Replacement:
Recommended every 15,000 - 30,000 miles (24,000 - 48,000 km) or as per manual inspection.
Spark Plug Replacement:
Typically at 60,000 - 100,000 miles (96,000 - 160,000 km) depending on spark plug type (e.g., iridium).
Engine Oil Specification:
API Service SN/SP or ILSAC GF-6/GF-6A, SAE 5W-20 or 5W-30 (check owner's manual for exact recommendation based on temperature).
Coolant Specification:
Ethylene glycol-based antifreeze coolant, typically a 50/50 mix with distilled water. Asian vehicle specific or HOAT coolant recommended.
Common Problems:
Potential for minor electrical issues (e.g., power window motors), some suspension component wear (e.g., sway bar links), and occasional check engine lights related to emissions components.
Timing Belt Maintenance:
The 2.0L Beta II engine (G4GC) utilizes a timing belt which requires periodic replacement, typically around 90,000 miles (144,000 km). Failure to do so can cause catastrophic engine damage due to it being an interference engine.