Engine Mechanical:
Engine assembly, cylinder head, pistons, crankshaft, valve train, lubrication, cooling, fuel delivery (mechanical components), timing system
Engine Management And Emissions:
ECU, sensors (MAP, TPS, O2, ECT, Crankshaft Position, Camshaft Position), actuators, fuel injection system (electronic), ignition system, EVAP system, EGR system
Transmission Manual:
Clutch system, gear shift mechanism, internal transmission components, removal/installation, fluid specifications
Transmission Automatic:
Torque converter, valve body, planetary gear sets, transmission control module (TCM), hydraulic circuits, removal/installation, fluid specifications
Drivetrain:
Front/Rear differentials, drive shafts, CV joints, propeller shaft (AWD), transfer case (AWD)
Brakes:
Brake system diagnostics, front/rear disc brakes, ABS, EBD, brake fluid specifications, bleeding procedures, components (calipers, rotors, pads, master cylinder)
Suspension:
Front MacPherson strut, rear multi-link suspension, shock absorbers, springs, control arms, stabilizer bars, wheel alignment specifications
Steering:
Power steering system (hydraulic/electric), steering column, steering rack, tie rods, alignment specifications
Electrical System Basic:
Battery, charging system (alternator, starter), lighting (headlights, taillights, interior), fuses, relays, wiring diagrams (basic)
Body And Chassis:
Body panels, doors, hood, tailgate, interior trim, glass, seals, rust prevention
HVAC:
Air conditioning system, heater, ventilation, climate control module, refrigerant specifications, compressor, condenser, evaporator
Safety Systems:
Airbags, seat belts, SRS module, ABS control unit
Instrumentation And Controls:
Instrument cluster, gauges, switches, warning lights
Infotainment And Audio:
Radio, speakers, audio system diagnostics (basic)
Maintenance Tasks:
Oil changes, filter replacements, fluid checks/changes, spark plug replacement, belt inspection/replacement, brake pad/rotor replacement, tire rotation
Diagnostic Procedures:
Troubleshooting guides for common symptoms, DTC (Diagnostic Trouble Code) interpretation, sensor testing, circuit testing
Repair Procedures:
Step-by-step instructions for component removal, installation, and repair for all covered systems
Overhaul Procedures:
Complete engine and transmission overhaul procedures (where applicable)
Specifications And Tolerances:
Detailed torque specifications, clearances, wear limits, and diagnostic values
Depth:
Comprehensive: Covers basic maintenance to advanced diagnostics and complete component rebuilds
Diagnostics Level:
Advanced, including component-level testing and troubleshooting charts
Repair Scope:
Full mechanical, electrical, and body repair
Engine Code 2.4L:
Theta II GDI (G4KE)
Engine Displacement 2.4L:
2.4 Liters (2359 cc)
Engine Configuration 2.4L:
Inline-4, DOHC, 16 Valves
Engine Type 2.4L:
Naturally Aspirated, Gasoline Direct Injection (GDI)
Horsepower 2.4L:
176 hp @ 6000 rpm
Torque 2.4L:
168 lb-ft @ 4000 rpm
Fuel Delivery:
Gasoline Direct Injection (GDI)
Recommended Fuel:
87 Octane Unleaded Gasoline
Engine Code:
R2.0 (various variants)
Engine Displacement 2.0L Diesel
Engine Displacement:
2.0 Liters (1995 cc)
Engine Configuration 2.0L Diesel
Engine Configuration:
Inline-4, DOHC, 16 Valves, Common Rail Turbo Diesel
Horsepower:
Approx. 136-184 hp (depending on variant)
Torque:
Approx. 260-300 lb-ft (depending on variant)
Oil Change Interval:
Every 7,500 miles (12,000 km) or 12 months, whichever comes first (synthetic oil recommended)
Engine Air Filter:
Inspect every 7,500 miles (12,000 km), replace as needed (typically every 15,000 - 30,000 miles)
Cabin Air Filter:
Inspect every 7,500 miles (12,000 km), replace as needed (typically every 15,000 - 30,000 miles)
Spark Plugs:
GDI engines typically have longer-life iridium plugs, replacement interval around 100,000 miles (refer to manual for exact type and interval)
Coolant Replacement:
Initial replacement at 100,000 miles (160,000 km), then every 50,000 miles (80,000 km) thereafter (refer to manual for specific coolant type)
Engine Oil 2.4L:
API SN/SP, ILSAC GF-5 or higher, SAE 0W-20 (synthetic recommended)
Engine Oil Capacity 2.4L:
Approx. 4.5 quarts (4.3 liters) with filter change
Brake Fluid:
DOT 3 or DOT 4
Engine Warranty Claims:
Some reports of oil consumption in Theta II engines (check for recalls or extended warranties for specific VINs).
Transmission Issues:
Occasional reports of rough shifting or hesitation, particularly in older automatic transmissions. Proper fluid maintenance is key.
Suspension Components:
Wear in control arm bushings and ball joints over time, leading to clunking noises and alignment issues.
HVAC System:
Potential for condenser leaks or compressor failures, especially in warmer climates.