Engine Mechanical:
Detailed overhaul procedures, component identification, timing, valve adjustments, lubrication system, cooling system.
Fuel System:
Fuel injection pump, injectors, fuel lines, filters, troubleshooting.
Transmission Drivetrain:
Gearbox overhaul, clutch, PTO (Power Take-Off) system, differential, axles, drive shafts, troubleshooting.
Hydraulic System:
Hydraulic pump, cylinders, control valve, hoses, fluid specifications, troubleshooting, lift arm operation.
Electrical System:
Wiring diagrams, starter, alternator, battery, lighting system, ignition system (if applicable), troubleshooting.
Steering System:
Steering mechanism, linkage, troubleshooting.
Braking System:
Brake shoe adjustment, brake drum inspection, hydraulic brake system, troubleshooting.
Chassis Frame:
Frame inspection, mounting points, component removal and installation.
Operator Controls:
Lever identification, dashboard indicators, PTO engagement, 3-point hitch operation.
Routine Maintenance:
Oil change intervals, filter replacement, lubrication points, greasing schedule, battery maintenance.
Troubleshooting:
Diagnostic charts, symptom-based problem solving, common issues and their solutions.
Disassembly Assembly:
Step-by-step instructions for component removal, overhaul, and reassembly.
Adjustment Calibration:
Valve lash adjustment, PTO clutch adjustment, brake adjustments, linkage alignment.
Engine Rebuild:
Piston and ring replacement, bearing services, crankshaft and camshaft inspection, cylinder head overhaul.
Transmission Repair:
Gear set inspection, bearing replacement, seal replacement, clutch pack service.
Hydraulic Component Service:
Pump seal replacement, cylinder resealing, valve body maintenance.
Electrical Diagnostics:
Fault finding using wiring diagrams, circuit testing, component testing.
Part Identification:
Detailed exploded views and part numbers for all tractor components.
Depth Level:
Comprehensive (from routine maintenance to complete engine and transmission overhauls).
Diagnostic Capability:
Advanced troubleshooting guides, fault code interpretation (if applicable).
Specifications Accuracy:
Precise torque values, clearances, fluid capacities, and tolerances.
Engine Model:
Kubota D750 (Typical, specific engine may vary by sub-model/region; manual will specify)
Engine Type:
Diesel, 3-cylinder, liquid-cooled
Displacement:
Approximately 0.716 L (716 cc) (Specific to D750, manual will confirm for B6000)
Horsepower Gross:
Approximately 15-18 HP (Rating varies by specific engine variant and PTO vs. engine HP; manual will detail)
Torque:
Not readily available without specific engine model confirmation, but typically sufficient for compact tractor applications.
Injection System:
Indirect Injection (IDI) via injection pump and injectors.
Cooling Method:
Water-cooled via radiator and thermostat.
Oil Type:
API CE or CF service classification diesel engine oil (Specific viscosity grade e.g., 10W-30 or 15W-40 will be in the manual).
Oil Capacity:
Approximately 3.5 - 4.0 liters (with filter change), manual will provide exact capacity.
Transmission Type:
Sliding gear type manual transmission with Hi-Lo range or similar configuration.
Gear Configuration:
Likely 6-speed forward and 2-speed reverse or similar; manual will detail specific gear counts.
Optional Transmission:
Not typically offered for this model; the standard manual transmission was the norm.
Pto:
Rear PTO (e.g., 540 RPM) and potentially Mid PTO for mower decks, depending on configuration.
Differential Lock:
Standard or available differential lock for improved traction.
Transmission Oil Type:
API GL-4 or GL-5 Gear Oil (Specific viscosity grade like 80W-90 or 75W-90 will be detailed in manual).
Transmission Oil Capacity:
Approximately 15-20 liters, manual will provide exact capacity.
Engine Oil Change:
Typically every 100-250 operating hours or annually, whichever comes first. Manual will specify precise interval.
Transmission Oil Change:
Typically every 500-1000 operating hours or every 2 years. Manual will specify.
Hydraulic Oil Change:
Typically every 500-1000 operating hours or every 2 years. Manual will specify.
Fuel Filter Replacement:
Every 250-500 operating hours or as needed based on fuel quality. Manual will specify.
Air Filter Cleaning Replacement:
Cleaned at 50-100 hours, replaced annually or as needed. Manual will specify.
Coolant Type:
Ethylene glycol-based antifreeze (50/50 mix with distilled water). Manual will specify mixture ratio and capacity.
Hydraulic Fluid Type:
ISO VG 46 Hydraulic Oil or Kubota Super UDT Fluid (check manual for exact specification and compatibility).
Common Wear Items:
Clutch wear, PTO bearing wear, hydraulic seal deterioration, brake shoe wear.
Electrical Issues:
Corrosion on connectors, aging wiring insulation, starter/alternator wear are typical for older units.
Engine Performance:
Difficulty starting when cold, loss of power, excessive smoke can indicate injection system or compression issues.