Segment:
Compact Utility Tractor (CUT)
Target Audience:
Homeowners, small farm operators, landscapers, groundskeepers.
Competitors:
John Deere 2 series, Mahindra Max series, Massey Ferguson GC series, Yanmar SA series.
Versatility:
Designed for a wide range of tasks including mowing, tilling, hauling, snow removal, and loader work via numerous available attachments.
Compact Size:
Maneuverable in tight spaces and suitable for properties with limited storage or confined operating areas.
Engine Systems:
Engine overhaul, cooling system, lubrication system, fuel system, intake and exhaust systems, starting and charging systems, emissions control.
Powertrain Systems:
Transmission (HST - Hydrostatic Transmission), drivetrain, PTO (Power Take-Off) system, front axle, rear axle, differential.
Chassis And Controls:
Steering system (hydraulic power steering), braking system (hydraulic wet disc brakes), hydraulic system (lift arms, 3-point hitch, implement control), chassis, frame, suspension (if applicable).
Electrical Systems:
Wiring diagrams, lighting, instrumentation, battery, alternator, starter motor, safety switches.
Operator Station:
Controls, seat, dashboard, safety features, ROPS (Roll Over Protective Structure) if applicable.
Maintenance Procedures:
Routine maintenance, lubrication points, filter changes, fluid level checks, inspection schedules, adjustments.
Diagnostic Procedures:
Troubleshooting guides, fault diagnosis, symptom-based repairs, component testing, diagnostic codes (if applicable).
Repair Procedures:
Component removal and installation, disassembly and reassembly, seal replacement, gasket replacement, engine rebuild, transmission repair, hydraulic component service.
Specification Data:
Torque specifications, clearances, tolerances, fluid capacities, recommended lubricants, tightening sequences.
Depth Of Coverage:
Comprehensive factory-level detail suitable for professional technicians and advanced DIY users. Includes diagnostics, repair, overhaul, and component-level information.
Digital Format:
PDF (Portable Document Format)
Printability:
High-resolution pages, allowing for clear printing of individual sections or the entire manual.
Binding Recommendation:
User printable, allowing for custom binding (e.g., coil binding, three-ring binder) for workshop use.
Recommended Paper:
Standard copier paper is suitable for printing. Consider heavier stock for frequently accessed pages.
Engine Model:
Kubota D1105-BH (typically)
Engine Type:
Diesel, 3-cylinder, naturally aspirated, liquid-cooled
Gross Horsepower:
Approximately 23 HP (exact rating may vary slightly by specific configuration/year)
Net Horsepower:
Approximately 20-21 HP (PTO HP)
Bore X Stroke:
87 mm x 92.4 mm (3.43 in x 3.64 in)
Displacement:
1.123 L (68.5 cu in)
Injection System:
Indirect Injection (IDI) with glow plugs for cold starts
Fuel Filter:
Spin-on diesel filter (specific part number recommended in manual)
Transmission Type:
HST (Hydrostatic Transmission) with range selection (e.g., High/Low)
Optional Transmissions:
Not typically offered for this model; HST is standard.
Drive System:
2WD or 4WD (4WD typically standard on BX2350D)
Pto Engagement:
Independent PTO (typically mid and rear PTO)
Transmission Fluid:
Kubota Super UDT or equivalent (specific viscosity and specification in manual)
Overall Length:
Approx. 2,500 mm (98.4 in) without implements
Overall Width:
Approx. 1,015 mm (39.9 in) without implements
Overall Height:
Approx. 2,120 mm (83.5 in) to top of ROPS
Operating Weight:
Approx. 650-700 kg (1433-1543 lbs) without operator or attachments
Drawbar Horsepower:
Refer to manual for specific rating
Loader Lift Capacity:
Typically around 300-350 kg (660-770 lbs) at pivot pins (with specific front loader attached)
Rops Standard:
Equipped with ROPS (Roll Over Protective Structure) for operator safety, often foldable.
Parking Brake:
Mechanical parking brake
Seat Safety Switch:
Operator presence sensor to prevent operation when operator is not seated.
Lighting:
Headlights, taillights, turn signals (depending on configuration/market).
Warning Lights:
Indicator lights for various systems (e.g., battery, oil pressure, engine temperature).
Instrument Cluster:
Basic analog gauges (tachometer, temperature, fuel), indicator lights.
Cruise Control:
Not typically equipped on this model.
Power Steering:
Standard hydraulic power steering for ease of operation.
Bluetooth:
Not applicable for this type of heavy equipment.
Engine Oil Change:
Typically every 50 hours or annually, whichever comes first (refer to manual for specific interval).
Air Filter Inspection:
Check every 50 hours, clean/replace as needed.
Fuel Filter Replacement:
Recommended every 200 hours or annually.
Engine Oil Type:
Kubota Diesel Engine Oil SAE 10W-30 or 15W-40 (API CI-4 or higher, check manual for exact spec)
Engine Oil Capacity:
Approx. 4.5 L (4.8 US qt) with filter
Transmission Fluid Type:
Kubota Super UDT (Universal Drive Train) fluid or equivalent
Transmission Fluid Capacity:
Approx. 20 L (5.3 US gal) for HST transmission
Coolant Type:
Kubota Super Long Life Coolant (SLLC) or equivalent (50/50 mix)
Common Wear Items:
Hydraulic hoses, PTO belts, HST filters, front axle pivot points, seat wear.
Potential Failures:
Overheating if cooling system is neglected, HST system issues if fluid is contaminated or not changed per schedule, hydraulic leaks.
Manufacturer:
Kubota Corporation is a Japanese manufacturer of tractors, construction equipment, mowers, machinery, and engines.
Reputation:
Known for producing reliable, durable, and high-quality compact tractors.
Bx Series:
The BX series represents Kubota's popular line of compact utility tractors, balancing size, power, and versatility for various property sizes and tasks.
Production Period:
The BX2350D was produced in the mid to late 2000s, evolving from earlier BX models and leading to later iterations.
