Best Linde Diesel Forklift 391 Series-H14 H16 H18 H20 Operating Manual (User Manual)-PDF

常规价格: $16.99
促销价: $16.99
常规价格
单价: 单价

17 people are viewing this right now

类型: Forklift

斯库: 97243

标签: 391 Series Featured Forklift Forklifts H14 H16 H18 H20 Linde Material Handling

产品多属性

Description

The Linde 391 Series Forklift Truck, encompassing models H14D, H16D, H18D, H20D, and H20/600D, represents a robust line of diesel-powered material handling equipment. Linde is a globally recognized leader in this sector, known for engineering excellence, reliability, and innovative solutions. The 391 Series is designed to balance power and efficiency for diverse industrial applications, reflecting the brand's commitment to durable and high-performing machinery. This series likely features Linde's signature hydrostatic transmission, offering precise control and operational efficiency, further solidifying its position in a competitive market. This comprehensive 266-page operating manual, presented in English, provides essential information for the safe and effective use of the Linde 391 Series forklift trucks. It covers critical areas such as technical data including dimensions and type sheets, lift mast systems, truck configurations, tyre and rim specifications, and load capacity diagrams. The manual also details noise emission values and vibration characteristics, underscoring operator welfare and regulatory compliance. Its primary purpose is to guide operators in understanding the forklift's capabilities, performing pre-operation checks, and comprehending technical specifications for optimal and safe operation, rather than detailing complex repair procedures.

🏷️ Basic Information

Identification

Make:

Linde

Model:

391 Series Forklift Truck

Covered Models:

• H14D

• H16D

• H18D

• H20D

• H20/600D

Engine Type:

Diesel

Product Type:

Forklift Truck Operating Manual

Codes

Product Identifier:

Linde 391 Series - H14, H16, H18, H20 Operating Manual

👋 Introduction

Market Position

Market Positioning:

Linde is a globally recognized leader in material handling equipment, known for robust and efficient forklift trucks. The 391 Series typically represents a range of versatile diesel forklifts designed for various industrial applications, balancing power, durability, and operational efficiency.

Competitive Analysis

Competitive Landscape:

Competes with other major industrial forklift manufacturers such as Toyota, Hyster, Yale, Caterpillar, and Komatsu in the diesel forklift segment. Linde often differentiates itself through advanced engineering, operator comfort, and specific technological innovations.

Key Features

Key Manual Features:

• Detailed technical data for specific models (H14D to H20/600D)

• Load capacity and attachment rating information

• Mast specifications

• Tyre and rim data

• Comprehensive overview of dimensions and configurations

Noise And Vibration Data:

Coverage of 'Noise emission values' and 'Vibration characteristic values' highlights Linde's commitment to operator welfare and regulatory compliance.

📋 Manual Details

Coverage Areas

Covered Models By Manual:

• H14D

• H16D

• H18D

• H20D

• H20/600D

Page Count

Page Count:

Manual Type

Manual Type:

Operating Manual / User Manual

Language

Language:

English

Format

Format:

PDF Download

Distribution Method:

Digital Download (PDF)

📖 Manual Coverage

Systems Covered

Vehicle Systems Coverage:

• Technical Data (Dimensions, Type Sheets)

• Lift Mast Systems (Model 181 Data)

• Truck Configuration

• Tyre Variants and Rim Sizes

• Load Capacity Diagrams

• Additional Capacity Rating Plates (for attachments)

• Noise Emission Values

• Vibration Characteristics

Lift Mast Data:

Includes specific data for 'Lift mast data model 181', crucial for understanding lifting capabilities, speed, and height limitations.

Tyre And Rim Data:

Details 'Tyre variants and rim sizes', essential for maintenance, tire replacement, and understanding the forklift's footprint and load distribution.

Technical Data Scope:

The 'Technical data' section is comprehensive, covering dimensions, performance characteristics, and specifications vital for understanding the operational envelope of the forklift.

Procedures Included

Operational Procedures:

• Safe operation of Linde 391 Series diesel forklift

• Understanding load capacity diagrams

• Attachment compatibility and capacity ratings

• Pre-operation checks

• Daily maintenance routines

• Understanding technical specifications for optimal use

Understanding Load Charts:

Emphasis on 'Load capacity diagrams' and 'Additional capacity rating plate for attachments' ensures users can safely determine the forklift's lifting capabilities under various conditions.

Operator Awareness:

The manual aims to build operator awareness of the machine's capabilities and limitations, particularly concerning load handling and environmental factors like noise and vibration.

Technical Depth

Technical Depth:

Comprehensive operational and technical data for user-level understanding and basic checks. Focuses on specifications, configurations, and safe usage rather than detailed repair procedures.

User Level Information:

This operating manual is geared towards the end-user or operator, providing essential information for safe and effective daily use, understanding the machine's capabilities, and performing basic checks. It is not a repair or service manual.

📊 Manual Specifications

File Format

File Format:

Searchability:

PDF format generally allows for text searchability, making it efficient to locate specific information within the 266 pages.

Document Type Clarification:

The product description clearly states 'Operating Manual (User Manual)', differentiating it from a service or repair manual.

Print Quality

Print Quality Considerations:

PDF format allows for high-resolution printing. Content includes diagrams and tables which are crucial for technical data. Searchable text is a common feature of well-formatted PDFs.

Binding Type

Binding Type If Printed:

N/A (Digital PDF)

Paper Type

Paper Type If Printed:

N/A (Digital PDF)

⚙️ Engine Specifications

Primary Engine

Engine Type General:

Diesel Engine

Engine Variants:

The manual covers various models (H14D, H16D, H18D, H20D, H20/600D) which are distinguished by their engine power ratings and load capacities, implying different engine outputs across the series.

Performance

Performance Metrics Overview:

Specific performance metrics (horsepower, torque) would be detailed in the 'Technical Data' and 'Type Sheets' within the manual. These values are crucial for understanding the power output relevant to load capacities.

Load Capacity Relation:

Engine performance is intrinsically linked to the load capacities specified in the manual, with higher capacity models typically featuring more powerful diesel engines.

Fuel System

Fuel System Type:

Direct Injection Diesel (typical for modern industrial diesel engines)

🔧 Transmission

Standard

Transmission Type:

Hydrostatic Transmission (Linde's signature Linde-Matic or similar variable hydraulic drive is highly probable for this series, offering precise control and efficiency)

Optional

Optional Transmission:

Information on optional transmissions is not explicitly mentioned in the provided product description, but typically, industrial forklifts might offer variations depending on specific market demands.

Features

Transmission Features:

Linde's hydrostatic transmission is known for smooth acceleration and deceleration, precise inching control, high energy efficiency, and reduced wear compared to traditional torque converter transmissions.

📐 Dimensions

Exterior

Dimensions Coverage:

The manual includes an 'Overview of dimensions' and specific 'Type sheets' for H14D, H16D, H18D, H20D, and H20D-CT/600, providing detailed external dimension data for each model.

Model Specific Dimensions:

Detailed type sheets for H14D, H16D, H18D, H20D, and H20D-CT/600 provide dimensional data unique to each model configuration.

Weights

Weight Information:

Weight data is likely included within the 'Technical Data' and 'Type Sheets', covering aspects like operating weight and potentially axle load distributions.

Gross Vehicle Weight Relation:

Operating weight and axle load data are foundational for understanding the forklift's stability and handling characteristics, directly influenced by its physical dimensions and load capacity.

Cargo

Load Capacity Information:

Features detailed 'Load capacity diagrams' which are critical for safe and efficient operation, showing how load capacity changes with mast height, load center, and attachment usage.

🛡️ Safety Features

Ratings

Safety Ratings Coverage:

The manual covers 'Noise emission values' and 'Vibration characteristic values for bodily vibrations', which are key safety and health indicators for operators.

Active Features

Active Safety Features Manual Reference:

While not detailing active safety systems like advanced braking or stability control, the manual's emphasis on load capacity diagrams and correct operation implicitly promotes safe handling practices.

Passive Features

Passive Safety Features Manual Reference:

The manual's focus on providing accurate technical data (dimensions, capacities, configurations) is foundational for ensuring the forklift operates within its designed safety parameters.

💡 Technology Features

Infotainment

Infotainment System:

Industrial forklifts of this era typically do not feature infotainment systems. Focus is on operational data displays.

Driver Assistance

Driver Assistance Features Manual Reference:

The manual's detailed load capacity diagrams and operational guidelines act as primary driver assistance tools, ensuring safe load handling.

Ergonomic Design Reference:

While not a technical system, the ergonomic aspects of the forklift's design, often detailed in operating manuals, contribute to operator safety and efficiency.

Connectivity

Connectivity Features:

Modern forklifts may incorporate telematics, but this operating manual likely focuses on fundamental vehicle operation rather than digital connectivity features.

🔧 Maintenance

Service Intervals

Service Interval Coverage:

While this is an operating manual, it would typically direct users to a separate service manual for detailed scheduled maintenance intervals. However, it may include daily checks and basic maintenance guidance for the operator.

Daily Checks Coverage:

Operating manuals often include a section on daily pre-operation checks, which are crucial for safe and reliable performance, and are a key part of operator maintenance responsibility.

Fluid Specifications

Fluid Specifications Coverage:

Specifications for hydraulic fluid, engine oil, coolant, and transmission fluid are critical and would be detailed in the 'Technical Data' section. Specific API/ACEA classifications or OEM specifications would be provided.

Coolant Type Consideration:

For diesel engines, coolant specifications (e.g., type of antifreeze/coolant, mixture ratio) will be critical and detailed in the technical data.

Known Issues

Common Issues Guidance:

Operating manuals usually do not detail common issues. This manual focuses on correct operation and specification, not troubleshooting or repair of known problems, which are covered in service and repair manuals.

📚 Vehicle History

Brand Heritage

Linde Heritage:

Linde Material Handling is a brand with a long history of innovation in the logistics and material handling industry, founded in Germany and part of the KION Group. They are known for pioneering hydrostatic drive systems in forklifts.

Linde Specialization:

Linde is renowned for its expertise in electric and internal combustion engine forklifts, with a strong emphasis on ergonomics, safety, and energy efficiency.

Model Evolution

Model Series Evolution Context:

The 391 Series represents a generation of Linde's robust diesel counterbalance forklift trucks, likely evolving from earlier designs to incorporate improved efficiency, ergonomics, and emissions control technologies.

Series Designation Meaning:

The '391 Series' designation signifies a specific platform or generation of Linde's diesel forklift trucks, with 'H' typically denoting a counterbalanced forklift and the numbers (14, 16, 18, 20) representing approximate load capacity in hundreds of kilograms (e.g., 1.4 to 2.0 tonnes).

Production

Production Locations:

Linde forklifts are manufactured in various global locations, with significant production facilities in Germany and other strategic sites to serve international markets.