Massey Ferguson MF-8120 Tractor Full Service Repair Manual

常规价格: $16.99
促销价: $16.99
常规价格
单价: 单价

🏷️ Basic Information Identification Make: Massey Ferguson Model: MF-8120 Tractor Product Type: Full Service Repair Manual 👋 Introduction Market Position Target User: Farmers, agricultural contractors, maintenance workshops, equipment operators requiring...

27 people are viewing this right now

类型: Tractor

斯库: 17711

标签: Massey Ferguson MF-8120 Tractor

产品多属性

Description

🏷️ Basic Information

Identification

Make:

Massey Ferguson

Model:

MF-8120 Tractor

Product Type:

Full Service Repair Manual

👋 Introduction

Market Position

Target User:

Farmers, agricultural contractors, maintenance workshops, equipment operators requiring in-depth knowledge for upkeep and repair of the MF-8120.

Competitive Analysis

Value Proposition:

Provides essential technical data and procedural guidance to minimize downtime, optimize performance, and ensure longevity of the Massey Ferguson MF-8120 tractor.

Key Features

Manual Content:

Detailed step-by-step instructions, extensive troubleshooting guides, clear diagnostic procedures, and comprehensive component specifications.

📋 Manual Details

Coverage Areas

Comprehensiveness:

Full service, repair, maintenance, and rebuild

Page Count

Estimated Pages:

Varies (typically 500-1000+ pages for full service manuals of this caliber)

Manual Type

Type:

Service and Repair Manual

Language

Language:

English (standard for most official manuals)

Format

Format:

PDF Download

📖 Manual Coverage

Systems Covered

Powertrain:

Engine (mechanical, fuel, lubrication, cooling, electrical), Transmission (gearbox, hydraulics, PTO), Axles (front and rear drive), Differential

Hydraulics:

Hydraulic pump, control valves, cylinders, remote outlets, linkage systems, hitch controls

Electrical:

Starting and charging systems, lighting, instrumentation, wiring diagrams, sensors, ECU (if applicable)

Chassis And Body:

Frame, steering system, braking system, front and rear wheel hubs, operator station, cab (if applicable), fenders, counterweights

Steering:

Hydraulic power steering system, steering cylinder, tie rods, steering column, wheel alignment.

Braking:

Service brakes, parking brake, hydraulic brake system components, brake fluid specifications.

Procedures Included

Maintenance:

Lubrication schedule, fluid changes (engine oil, transmission fluid, hydraulic fluid, coolant, axle oil), filter replacements, greasing points

Diagnostics:

Troubleshooting charts, symptom-based diagnostics, diagnostic codes (if applicable), testing procedures for major components

Repair:

Step-by-step repair instructions for all major systems, component overhaul procedures, alignment procedures, torquing specifications

Rebuild:

Complete engine rebuild procedures, transmission disassembly and reassembly, axle and final drive overhaul

Technical Depth

Depth:

Comprehensive, suitable for qualified technicians and experienced DIY users; includes detailed diagrams, specifications, and troubleshooting guidance.

📊 Manual Specifications

File Format

PDF Quality:

High-resolution, printable, searchable text (if OCR'd)

Print Quality

Print Readability:

Designed for clarity and ease of reading on screen and when printed.

Binding Type

Binding:

N/A (PDF format)

Paper Type

Paper Stock:

N/A (PDF format)

⚙️ Engine Specifications

Primary Engine

Engine Make Model:

Typically Perkins or Agco Power (depending on specific build).

Engine Type:

Diesel, turbocharged and intercooled (common configuration).

Displacement:

Likely in the range of 6.0 to 8.0 liters, common for tractors in this class.

Horsepower:

Varied based on specific variant, but generally in the 100-150 HP range for a model named '8120'.

Torque:

Significant torque output, crucial for heavy draft work, specifications found within the manual.

Bore X Stroke:

Specific dimensions would be detailed in the manual, crucial for engine rebuilds.

Compression Ratio:

Typically around 16:1 to 18:1 for turbocharged diesel engines of this era.

Performance

Emission Standards:

Euro II/III or equivalent depending on manufacturing region and year.

Governed Engine Speed:

Likely 2000-2200 RPM for maximum power, with idle speed around 750-850 RPM.

Fuel System

Injection System:

Common Rail Direct Injection (CRDI) or advanced mechanical injection (depending on specific variant and year).

Fuel Type:

Diesel Fuel

Fuel Filter Part Number:

Specific part numbers (e.g., Wix, Baldwin, original AGCO) would be listed in the manual for fuel, oil, and air filters.

🔧 Transmission

Standard

Transmission Type:

Powershift (e.g., 16/16 or 32/32 speed) or Synchronized Constant Mesh (SCM) gearboxes.

Optional

Optional Features:

Creep speed transmission, powershuttle, specific PTO configurations.

Features

Pto Options:

Standard 540/1000 RPM, ground speed PTO, or electronic PTO control.

Rear Axle Type:

Heavy-duty planetary final drives for maximum torque multiplication.

Differential Lock:

Mechanical or electro-hydraulic differential lock for rear axle, essential for traction in slippery conditions.

📐 Dimensions

Exterior

Wheelbase:

Specific values depend on configuration, but typical for this class would be 2600-2900 mm.

Overall Length:

Estimated 4.5-5.5 meters.

Overall Width:

Typically 2.0-2.5 meters (varies with tire size and configuration).

Overall Height:

Cab height typically 2.7-3.0 meters.

Ground Clearance:

Adequate for agricultural operations, typically 400-600 mm under the rear axle or frame.

Weights

Unladen Weight:

Estimated 5,000-7,000 kg (depending on specification).

Max Gross Weight:

Likely in the 8,000-10,000 kg range.

Front Axle Capacity:

Designed to handle significant front-end loader weight and implement loading.

Rear Hitch Lift Capacity:

Class III or IV heavy-duty rear hitch, with lift capacities often exceeding 5,000 kg at the link ends.

🛡️ Safety Features

Ratings

Rollover Protection:

ROPS (Roll-Over Protective Structure) as standard or optional, often integrated into cab design.

Active Features

Braking System:

Hydraulically assisted disc brakes (wet or dry) on rear axle, often power-assisted steering.

Passive Features

Operator Station:

Ergonomically designed operator station with safety glass, seat belts, and accessible controls.

💡 Technology Features

Infotainment

Operator Interface:

Analog gauges, dashboard warning lights, electronic PTO and hitch controls (on some variants), potentially basic digital displays for hours and speed.

Driver Assistance

Performance Features:

Electronic draft control for hitch, cruise control for engine RPM, powershift transmission for on-the-go gear changes.

Connectivity

Diagnostics Port:

May feature a diagnostic port for engine control units or other electronic systems, enabling connection to specialized diagnostic tools.

🔧 Maintenance

Service Intervals

Engine Oil Change:

Typically every 250-500 operating hours, refer to manual for exact interval and oil specification.

Hydraulic Fluid Change:

Recommended every 1000-1200 operating hours or annually.

Transmission Fluid Change:

Intervals vary based on transmission type, often 1000-1500 operating hours.

Fluid Specifications

Engine Oil:

API CD/CE/CF or higher specification, SAE 15W-40 or 10W-30 (depending on climate). Specifics in manual.

Hydraulic Fluid:

Massey Ferguson approved M-1135 or M-1145 hydraulic fluid, or equivalent (e.g., Cat TO-4, John Deere Hy-Gard compatible).

Transmission Fluid:

Specific transmission fluid type required, typically a UTF (Universal Tractor Transmission) fluid or specialized oil, detailed in manual.

Coolant:

50/50 mix of ethylene glycol antifreeze and deionized water, meeting John Deere JDM J185 or equivalent specifications.

Transmission Fluid Capacity:

Approximately 40-60 liters, exact capacity to be confirmed in the manual.

Engine Oil Capacity:

Typically 15-20 liters, depending on engine variant.

Coolant Capacity:

Around 20-25 liters.

Known Issues

Common Wear Points:

Hydraulic system seals, PTO clutch packs, front axle kingpins and bushings, electrical connectors (due to environmental exposure).

Potential Problems:

Overheating if cooling system is not maintained, transmission shifting issues if hydraulic pressure is low, fuel system component wear.

Common Repairs:

Engine component overhauls, transmission clutch pack replacement, hydraulic pump and valve repairs, electrical wiring harness issues.

Preventative Maintenance:

Regular cleaning of radiators and coolers, checking and topping up all fluid levels, greasing pivot points, inspecting belts and hoses.

📚 Vehicle History

Brand Heritage

Massey Ferguson Legacy:

Massey Ferguson has a long and storied history in agricultural machinery, known for innovation and robust engineering.

Model Evolution

Mf 8100 Series:

The 8100 series was a significant range of tractors for Massey Ferguson, often featuring advanced technologies for their time, bridging the gap between utility and high-horsepower farm workhorses.

Production

Production Years:

The MF-8100 series was generally produced in the mid-to-late 1990s.

🏆 Awards & Recognition

Recognitions

Industry Awards:

Specific awards for the MF-8120 are not widely publicized, but Massey Ferguson tractors of this era were generally well-regarded for their reliability and power output in their respective classes.

Ratings

Operator Reviews:

User reviews often highlight strong pulling power, durable transmissions, and comfortable cabins for the period, alongside maintenance requirements typical of heavy machinery.

Certifications

Safety Standards:

Compliant with relevant agricultural machinery safety standards of the production era (e.g., ISO standards for tractor safety).