Market Segment:
Compact Pickup Truck
Key Competitors:
Nissan D21 (Hardbody), Toyota Hilux (pre-Tacoma), Mitsubishi Mighty Max
Vehicle Strengths:
Reliability, durability, good payload capacity for its class, capable off-road (especially 4WD models).
Coverage Years:
1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
Body Styles Covered:
Regular Cab, Extended Cab, Chassis Cab
Drivetrain Configurations Covered:
Rear-Wheel Drive (RWD), Four-Wheel Drive (4WD)
Estimated Page Count:
1500+
Manual Type:
Factory Service and Repair Manual
Engine Systems:
Engine Mechanical, Fuel System, Ignition System, Cooling System, Exhaust System, Lubrication System, Emission Control
Transmission Systems:
Manual Transmission, Automatic Transmission, Drivetrain Components (Driveshafts, Axles)
Chassis Systems:
Suspension System (Front & Rear), Steering System, Brake System (Front & Rear), Wheels & Tires
Electrical Systems:
Charging System, Starting System, Lighting System, Instrumentation, Wiper/Washer System, Audio System, Power Accessories
Body And Interior:
Body Panels, Doors, Glass, Seats, Trim, HVAC System (Heating, Ventilation, Air Conditioning)
Maintenance Procedures:
Scheduled Maintenance, Fluid Changes, Filter Replacements, Lubrication
Repair Procedures:
Component Removal & Installation, Component Overhaul, Engine Rebuild, Transmission Overhaul, Brake System Repair, Suspension Component Replacement
Troubleshooting:
Diagnostic Flowcharts, Symptom-Based Troubleshooting Guides, Electrical System Diagnosis
Technical Specifications:
Torque Specifications, Clearances, Tolerances, Wiring Diagrams, Component Identification
Depth Of Coverage:
Comprehensive from basic maintenance to complete engine and transmission rebuilds, including electrical schematics and diagnostic procedures.
B2200 Engine Type:
2.2L SOHC Inline-4 Cylinder
B2200 Horsepower:
Approx. 98-106 hp (depending on year and market)
B2200 Torque:
Approx. 120-130 lb-ft (depending on year and market)
B2600 Engine Type:
2.6L SOHC Inline-4 Cylinder (Mitsubishi 4G54 based)
B2600 Horsepower:
Approx. 118-122 hp (depending on year and market)
B2600 Torque:
Approx. 135-145 lb-ft (depending on year and market)
Fuel Delivery B2200:
Electronic Fuel Injection (EFI)
Fuel Delivery B2600:
Electronic Fuel Injection (EFI)
Compression Ratio B2200:
9.2:1 (approx.)
Compression Ratio B2600:
8.8:1 (approx.)
Standard Transmission:
5-Speed Manual
Optional Transmission:
4-Speed Automatic
Transfer Case 4Wd:
Manual engagement, 2-speed (High/Low range)
Transmission Fluid Type Manual:
GL-4 Hypoid Gear Oil (e.g., Mazda Manual Transmission Fluid, Part No. 0000-77-GL4-QT or equivalent)
Transmission Fluid Type Automatic:
Dexron III/Mercon Automatic Transmission Fluid (ATF)
Wheelbase Regular Cab:
Approx. 104.3 inches (2649 mm)
Wheelbase Extended Cab:
Approx. 117.5 inches (2984 mm)
Bed Length Standard:
Approx. 74 inches (1880 mm)
Bed Length Long:
Approx. 86 inches (2184 mm)
Curb Weight Range:
Approx. 2,800 - 3,500 lbs (depending on configuration)
Payload Capacity Range:
Approx. 1,000 - 1,500 lbs (depending on configuration)
Towing Capacity Range:
Approx. 2,000 - 4,000 lbs (depending on configuration and trailer brakes)
NHTSA Ratings Era:
Limited specific standardized crash test data available for this era of vehicle, but generally considered robust for its class.
Active Safety Features:
Four-wheel disc or front disc/rear drum brakes. Limited-slip differential (optional on some 4WD models).
Passive Safety Features:
Three-point seat belts (front), lap belts (center/rear where applicable).
Infotainment System Era:
Basic for its time: AM/FM radio, optional cassette player. Speaker count typically 2-4.
Driver Assistance Features:
None in the modern sense. ABS was not standard or widely available during most of this generation.
Connectivity Options:
Limited to basic antenna connection for radio.
Oil Change Interval:
Every 3,750 miles (6,000 km) or 3 months, whichever comes first (under normal driving conditions).
Air Filter Replacement:
Every 15,000 miles (24,000 km) or 12 months.
Spark Plug Replacement:
Every 30,000 miles (48,000 km) (for standard spark plugs).
Timing Belt Replacement:
Not Applicable (These engines use a timing chain)
Engine Oil Type Capacity B2200:
API SG/SH 10W-30 or 10W-40, 4.2 US quarts (4.0 L) with filter.
Engine Oil Type Capacity B2600:
API SG/SH 10W-30 or 10W-40, 4.4 US quarts (4.2 L) with filter.
Coolant Type:
Ethylene Glycol based coolant, typically a 50/50 mix with distilled water. Mazda FL22 coolant or equivalent.
Common Problems B2200:
Carburetor issues (on earlier non-EFI models), rust in rocker panels and wheel wells, clutch wear, occasional coolant leaks from thermostat housing or hoses.
Common Problems B2600:
Valve seat recession (especially if lower octane fuel used), exhaust manifold cracks (due to heat cycling), timing chain tensioner wear, rear main seal leaks.
General Wear Items:
Ball joints, tie rod ends, shock absorbers, exhaust system components, clutch components.
Tire Pressure Front:
Typically 26-32 PSI (refer to door jamb sticker for specific recommendation)
Tire Pressure Rear:
Typically 26-32 PSI (refer to door jamb sticker for specific recommendation)
Wheel Bolt Pattern:
5x114.3mm (5x4.5 inches)
Recommended Octane Rating:
87 AKI (Unleaded) for B2200; 87 AKI (Unleaded) recommended for B2600 to prevent pinging/knock.
Mazda Truck Lineage:
Followed the Mazda Rotary Pickup (REPU) and earlier Courier models, establishing Mazda's reputation in the compact truck segment.
Generation Transition:
The B-Series entered its second generation (UF) with a more modern design, improved ergonomics, and the introduction of the larger 2.6L engine option. This generation saw significant sales success.
Production Location:
Hofu, Yamaguchi Prefecture, Japan
Production Period:
1985-1993 (for this generation)
