🏷️ Basic Information

Make:

Mercedes-Benz

Model:

M-Class

Model Code:

W164

Year:

2011

Generation Code:

Second Generation (W164)

Generation Years:

2005-2011

Chassis Code:

W164

👋 Introduction

Target Audience:

Mercedes-Benz M-Class (W164) owners seeking to perform their own maintenance, diagnostics, and repairs; independent repair shops.

Value Proposition:

Provides factory-level, vehicle-specific repair information identical to that used by dealership technicians, offering significant cost savings and empowering owners with in-depth knowledge.

Accuracy And Specificity:

Emphasizes being 'NOT GENERIC REPAIR INFORMATION' but 'VEHICLE SPECIFIC' for the 2011 M-Class (W164).

Usability And Convenience:

Single, easy-to-use PDF manual with printable pages, digital storage for cleanliness, and enlarged image capabilities.

📋 Manual Details

Manual Scope:

All Models & All Repairs A-Z

Estimated Page Count:

Extensive (specific count not provided, but described as 'everything you will ever need')

Type:

Service and Repair Manual

Language:

English

Format:

PDF

📖 Manual Coverage

Powertrain:

Engine, Control System, Fuel Service, Emission Control, Intake, Exhaust, Cooling, Lube, Ignition, Starting, Charging, Auto Transmission, Manual Transmission, Transfer Case, Propeller Shaft, Drive Shaft, Differential, Axle

Chassis:

Suspension, Tire & Wheel, Brake Control, Brake, Parking Brake, Steering Column, Power Steering

Electrical And Electronics:

Air Conditioning, Supplemental Restraint System (SRS), Seat Belt, Engine Immobilizer, Cruise Control, Wiper & Washer, Door Lock, Meter, Audio/Visual, Horn, Windshield/Glass Mirror, Instrument Panel, Electrical Systems, Multiplex/CAN Communication

Body And Interior:

Seat, Engine Hood/Door, Exterior & Interior Trim

Maintenance:

Scheduled Maintenance, Fluid Changes, Filter Replacements, Inspections

Diagnostics And Troubleshooting:

Fault Code Diagnosis, Symptom-Based Troubleshooting, Electrical Schematics Interpretation

Repair And Rebuild:

Component Removal, Installation, Overhaul, Adjustments, Component-Level Repair

Technical Data And Specifications:

Torque Specifications, Fluid Capacities, Clearances, Electrical Values, Diagnostic Data

Depth:

Factory Level Detail; Comprehensive step-by-step instructions, diagrams, illustrations, wiring schematics, and specifications for complete repair.

Wiring Diagrams Completeness:

Extensive and detailed wiring schematics for all electrical systems, enabling accurate diagnosis and repair of electrical faults.

Diagnostic Procedures:

Guidance on using diagnostic tools (e.g., STAR DIAGNOSIS / XENTRY) for accessing control modules, reading fault codes, and performing system tests.

Body And Frame Repair:

Procedures for body panel removal and installation, frame straightening (if applicable), and interior trim components.

Exhaust Component Replacement:

Information on exhaust manifold, catalytic converter, mufflers, and exhaust pipe replacement and repair.

Cooling System Repair:

Detailed procedures for radiator replacement, hose replacement, thermostat replacement, and leak detection.

Suspension Component Replacement:

Procedures for replacing control arms, ball joints, bushings, shock absorbers, struts, and air suspension components (if equipped).

Steering System Repair:

Information on power steering pump, steering rack, tie rod ends, and steering column components.

Fuel System Diagnosis:

Troubleshooting fuel delivery issues, fuel pump replacement, fuel injector testing, and fuel tank servicing.

Ignition Component Replacement:

Procedures for replacing spark plugs, ignition coils, and related sensors.

Alternator And Battery Service:

Information on alternator testing and replacement, battery diagnostics, and charging system troubleshooting.

Can Bus Diagnostics:

Understanding and diagnosing issues related to the CAN (Controller Area Network) bus communication, essential for modern vehicle diagnostics.

📊 Manual Specifications

Compatibility:

Windows (Vista 32/64, XP, ME, 98, NT, 2000) and Mac Compatible

Software Requirements:

Adobe PDF Reader, Winzip (free downloads available)

Printability:

Fully Printable; Users can print only the required pages or enlarged diagrams.

Binding:

Digital (PDF) - eliminates need for physical binding; no greasy or torn pages.

Paper Quality:

N/A (Digital Format); User determines print paper quality.

Searchability:

Implied searchability within PDF format for quick information retrieval.

⚙️ Engine Specifications

Engine Variants Covered:

Likely includes the primary engine options for the 2011 W164 M-Class, such as the M272 (3.5L V6) and M273 (5.5L V8) gasoline engines, and potentially diesel variants like the OM642 (3.0L V6 turbodiesel).

Horsepower Torque Data:

Detailed specifications for each engine variant, including horsepower and torque curves, power delivery characteristics.

Fuel Delivery And Management:

Information on fuel injection systems (e.g., Bosch Motronic), fuel pumps, injectors, fuel pressure regulators, and emissions control systems.

Cooling System:

Radiator, coolant flow, thermostat operation, water pump, fan clutch/electric fan, and coolant specifications.

Oil System:

Oil pump, oil filter, oil pressure, oil cooler (if applicable), and oil specifications.

🔧 Transmission

Transmission Type:

7-speed automatic transmission (7G-TRONIC PLUS, W7A 700 / W7X 700 series) was standard on most 2011 M-Class models.

Optional Transmission:

While less common, manual transmissions were phased out for the M-Class in many markets by this generation. The manual transmission section likely covers procedures related to internal components or troubleshooting if a manual option existed for specific configurations.

Transmission Control:

Detailed information on the electronic transmission control module (TCM), shift solenoids, gear selection mechanisms, and torque converter clutch operation.

Transmission Fluid Specification:

Specific Mercedes-Benz approved Automatic Transmission Fluid (ATF) specifications, such as MB-Approval 236.14 (e.g., Shell ATF 134, Fuchs Titan ATF 4134).

📐 Dimensions

Dimensions Overview:

Covers overall length, width, height, and wheelbase specific to the W164 platform.

Interior Space:

Details on passenger volume, seating configurations, and cabin dimensions.

Cargo Capacity:

Information on rear cargo volume with seats up and down, and towing capacity specifications.

Curb Weight Gvwr:

Specifications for curb weight, Gross Vehicle Weight Rating (GVWR), and Gross Axle Weight Rating (GAWR).

Tire Sizes And Wheel Bolt Pattern:

Details on recommended tire sizes for various trims and wheel options, including lug bolt pattern (typically 5x112).

🛡️ Safety Features

NHTSA Or IIHS Ratings:

Likely includes diagnostic and repair procedures for safety-related systems, but specific crash ratings are usually in separate owner's materials. The manual would detail SRS component replacement and testing.

Driver Assistance Systems:

Coverage for systems like ABS (Anti-lock Braking System), ESP (Electronic Stability Program), ASR (Acceleration Slip Regulation), and potential ADAPTIVE BRAKE with HOLD function.

Supplemental Restraint System:

Detailed procedures for airbag system components (front, side, curtain), seat belt pre-tensioners, impact sensors, and the SRS control module. Crucial safety information regarding handling SRS components.

Brake System Diagnostics:

Information on brake fluid specifications (e.g., DOT 4 Plus), hydraulic systems, ABS/ESP component testing, brake pad and rotor replacement, and bleeding procedures.

💡 Technology Features

Comand System Details:

Information on the COMAND (Cockpit Management and Navigation) system, including its functions, controls, and potential troubleshooting for audio, navigation, and climate control interfaces.

Adas Features:

Details on driver assistance features like PARKTRONIC parking assist, DISTRONIC cruise control (if equipped), and their operational principles and maintenance.

Bluetooth And Multimedia:

Information on connecting mobile devices via Bluetooth, USB, or AUX inputs, and managing media playback.

Xenon Headlights And Sensors:

Procedures for servicing and troubleshooting Xenon headlights, rain sensors, light sensors, and parking sensors.

🔧 Maintenance

Routine Maintenance Schedule:

Detailed service intervals for oil changes, fluid checks, filter replacements, brake inspections, and other scheduled maintenance tasks based on mileage or time.

Engine Oil Specification:

Specific Mercedes-Benz approved engine oil viscosity grades and specifications, such as MB-Approval 229.5 or 229.51 (e.g., Mobil 1 ESP Formula 5W-30, Castrol EDGE Professional OE 0W-30).

Coolant Specification:

Mercedes-Benz approved coolant concentrate (e.g., MB 325.0 / 326.0) and the correct mixture ratio for the cooling system.

Common W164 Problems:

The manual would likely address common issues for this generation, such as: air suspension leaks (if equipped), electronic module failures (e.g., EIS, TCU), intake manifold runner flap issues (M272/M273 engines), carbon buildup on intake valves, and potentially transmission control unit (TCU) issues.

Filter Part Numbers:

Likely includes recommended part numbers for oil filters, air filters, cabin filters, and fuel filters for various engine options.

📚 Vehicle History

Mercedes Benz SUV Legacy:

Places the W164 M-Class within Mercedes-Benz's expanding SUV portfolio, building on the legacy of the first M-Class (W163) and the G-Class.

W164 Development:

The W164 represented a significant evolution from the W163, featuring improved styling, enhanced interior quality, more advanced technology, and refined powertrains. The 2011 model is typically the final iteration before the W166 generation.

Manufacturing Locations:

Primarily manufactured at Mercedes-Benz's Tuscaloosa, Alabama plant, USA, with potential assembly in other global locations.

🏆 Awards & Recognition

Vehicle Awards Historical:

While specific awards for the 2011 model aren't listed, the W164 generation generally received positive reviews for its luxury, comfort, and on-road performance, often being recognized in luxury SUV categories.

Safety And Reliability Ratings:

The manual would provide the technical basis for maintaining safety and reliability, implying a focus on adherence to factory specifications for optimal performance and longevity.

Manufacturer Certifications:

The manual itself is a representation of Mercedes-Benz's internal quality control and engineering standards.