Engine Systems:
Engine mechanical (disassembly, assembly, tolerances, diagnostics), Fuel system (injection, fuel pump, injectors, lines), Ignition system (coil packs, spark plugs, ECU), Cooling system (radiator, thermostat, water pump, hoses), Lubrication system (oil pump, oil filter, oil cooler), Emission control systems (catalytic converter, EGR, secondary air injection), Engine management (ECU diagnostics, sensor data).
Transmission Systems:
Automatic transmission (e.g., 4-speed 722.4, 5-speed 722.5) disassembly, assembly, torque converter, valve body diagnostics, electronic control module (TCM), fluid specifications, and replacement.
Drivetrain Systems:
Driveshaft, differential, rear axle, CV joints, wheel bearings, lubrication, and diagnostics.
Suspension And Steering:
Independent front suspension (struts, control arms, ball joints), independent rear suspension, self-leveling suspension (if equipped), power steering system (pump, rack, hoses), steering column, alignment specifications, shock absorber replacement, spring replacement.
Brake Systems:
Hydraulic system, ABS (Anti-lock Braking System) diagnostics and components, brake calipers, rotors, pads, brake lines, master cylinder, brake fluid specifications, bleeding procedures, parking brake system.
Electrical Systems:
12V electrical system, battery, alternator, starter motor, fuses, relays, wiring diagrams for all circuits, lighting systems (headlights, taillights, interior), horn, wipers, power windows, power seats, power convertible top operation and hydraulics, climate control electricals, instrument cluster, diagnostics of electronic control units (ECUs), CAN bus diagnostics (if applicable to 1993 models, though likely pre-CAN).
Body And Chassis:
Body panel removal and installation, door mechanisms, convertible top operation (hydraulic and mechanical), chassis components, corrosion protection, paint codes, interior trim removal and installation, seat removal, dashboard disassembly.
Comfort And Convenience:
Climate control system (HVAC), automatic climate control diagnostics, power seats, memory seats, heated seats, cruise control, central locking, remote locking (if equipped), convertible top operation and troubleshooting.
Maintenance Procedures:
Oil and filter change, air filter replacement, fuel filter replacement, spark plug replacement, coolant flush and replacement, transmission fluid and filter change, brake fluid flush, power steering fluid change, differential fluid change, lubrication points, battery maintenance, belt replacement.
Diagnostic Procedures:
Troubleshooting guides based on symptoms, diagnostic trouble codes (DTCs) interpretation (OBD-I), sensor testing, actuator testing, electrical system diagnostics using multimeters and oscilloscopes, fuel system pressure testing, ignition system testing.
Repair Procedures:
Engine overhaul, cylinder head repair, transmission rebuild, suspension component replacement, brake system overhaul, electrical component replacement, convertible top hydraulic system repair, body panel repair and replacement, interior component repair.
Installation Procedures:
Installation of replacement parts (e.g., alternators, starters, fuel pumps, sensors, ECUs), accessory installation (if specified).
Diagnostic Depth:
Advanced (includes detailed troubleshooting flowcharts, sensor readings, and ECU logic explanations).
Rebuild Depth:
Complete (includes detailed specifications for internal engine and transmission components, torque values, and assembly procedures).
Wiring Diagrams:
Comprehensive, system-specific wiring diagrams for all major electrical components and circuits.
Length:
Approx. 4,740 mm (186.6 in)
Width:
Approx. 1,790 mm (70.5 in)
Height:
Approx. 1,300 mm (51.2 in)
Wheelbase:
Approx. 2,515 mm (99.0 in)
Curb Weight 300 Sl:
Approx. 1,770 kg (3,902 lbs)
Curb Weight 500 Sl:
Approx. 1,880 kg (4,145 lbs)
Gross Vehicle Weight Rating:
Varies by model, typically around 2,150-2,250 kg
Towing Capacity:
Not generally specified or recommended.
Oil Change Interval:
Every 7,500 miles or 1 year, whichever comes first (or as indicated by the 'Service A/B' indicator system).
Major Service Interval:
Examples include spark plug replacement (approx. 60,000 miles), coolant flush (approx. 30,000 miles), transmission fluid/filter (approx. 30,000-50,000 miles).
Power Steering Fluid Type:
MB Approved Power Steering Fluid (typically CHF 11S or equivalent for later models, but check manual for 1993 specific)
Differential Fluid Type:
SAE 90 Hypoid Gear Oil (API GL-5)
Common Wear Items:
Ball joints, tie rod ends, sway bar links, wheel bearings, fuel pump relay, vacuum lines, convertible top hydraulic hoses and cylinders, MAS (Mass Airflow Sensor) on M104 engines.
Electrical Gremlins:
Can occur due to age of wiring insulation, corroded connectors, or faulty components (e.g., ABS sensors, climate control modules).
Convertible Top System:
Hydraulic leaks, slow operation, or failure of microswitches are common issues that require specialized attention and are detailed in the manual.
Engine Management Issues:
Idle control valve issues, vacuum leaks affecting mixture, distributor cap/rotor wear (on older M104 variants).