Category:
Adventure Touring Motorcycle
Competitors:
BMW R1100GS, Honda Africa Twin, Yamaha TDM850
Engine Layout:
Longitudinal V-twin (90-degree)
Suspension Type:
Long-travel, adjustable suspension for off-road capability
Engine Systems:
Engine mechanics, lubrication, cooling, fuel delivery, ignition, exhaust
Transmission Drivetrain:
Gearbox, clutch, final drive (shaft drive)
Chassis Suspension:
Frame, front fork (Marzocchi/WP), rear shock absorber (WP/Sachs), suspension adjustments
Brakes:
Brake system hydraulics, calipers, master cylinders, discs, bleeding procedures
Electrical System:
Wiring diagrams, lighting, battery, charging system, starting system, ECUs, sensors
Bodywork Fittings:
Fairings, body panels, seat, handlebars, controls
Maintenance:
Scheduled maintenance, fluid changes, filter replacements, adjustments
Troubleshooting:
Diagnostic procedures, common issues, fault finding
Repair Rebuild:
Component disassembly, assembly, repair, and overhaul
Installation Removal:
Step-by-step instructions for removing and installing parts
Depth Of Coverage:
Comprehensive, from basic adjustments to detailed engine and component rebuilds, including special tool references
Engine Type:
Air-cooled, four-stroke, 90-degree V-twin
Bore X Stroke:
92 mm x 80 mm
Valve Train:
Overhead valves (OHV), pushrod operated (2 valves per cylinder)
Horsepower:
Approximately 85 HP (62.5 kW) @ 6600 rpm (estimated)
Torque:
Approximately 70 lb-ft (95 Nm) @ 5000 rpm (estimated)
Fuel Delivery:
Weber-Marelli electronic fuel injection
Ignition System:
Electronic ignition, dual spark plugs per cylinder
Crankshaft:
Plain crankshaft, longitudinally mounted
Instrumentation:
Analog speedometer and tachometer, digital odometer, trip meters, fuel gauge, warning lights
ABS:
Optional ABS system on certain configurations
Diagnostic Port:
OBD-II or proprietary diagnostic connector for engine management system
Oil Change Interval:
Typically every 6,000 - 10,000 km (refer to manual for specifics)
Valve Clearance Check:
Typically every 10,000 - 20,000 km
Engine Oil Type:
SAE 10W-50 or 20W-50 motorcycle specific synthetic or mineral oil (check manual for exact grade and API/JASO rating)
Engine Oil Capacity:
Approximately 3.5 - 4.0 Liters (with filter change)
Gearbox Oil Type:
SAE 80W-90 API GL-4 or GL-5 gear oil
Final Drive Oil Type:
SAE 80W-90 API GL-5 gear oil
Coolant Type:
Not applicable (air-cooled engine)
Common Wear Items:
Clutch plates, gearbox input shaft spline, driveshaft U-joints, swingarm bearings, alternators
Electrical Quirks:
Wiring harness issues, voltage regulator failures, starter solenoid problems
Engine Management:
Potential for intermittent fuel delivery issues, sensor failures (e.g., TPS, MAP)
