VESPA PIAGGIO FLY 125 4T FLY125 Parts Manual

常规价格: $16.99
促销价: $16.99
常规价格
单价: 单价

🏷️ Basic Information Identification Make: Vespa Manufacturer: Piaggio Model: Fly 125 4T Internal Model Code: FLY125 Codes Product Code: Vespa_Fly125_4T_Parts_Manual 👋 Introduction Market Position Scooter Segment: Urban mobility, commuter scooter....

28 people are viewing this right now

类型: Motorcycle

斯库: 124420

标签: Fly FLY 125 4T FLY125 Motorcycle Motorcycles Piaggio Vespa

产品多属性

Description

🏷️ Basic Information

Identification

Make:

Vespa

Manufacturer:

Piaggio

Model:

Fly 125 4T

Internal Model Code:

FLY125

Codes

Product Code:

Vespa_Fly125_4T_Parts_Manual

👋 Introduction

Market Position

Scooter Segment:

Urban mobility, commuter scooter.

Target User:

City dwellers seeking an economical, stylish, and practical mode of transportation.

Competitive Analysis

Competitors:

Honda PCX125, Yamaha NMAX 125, Kymco Agility City 125, Aprilia SR Motò 125.

Key Features

Design Philosophy:

Modern, ergonomic design with classic Vespa styling cues, prioritizing comfort and practicality for urban use.

Manual Utility:

Essential for owners and technicians to accurately identify and source replacement parts, ensuring correct assembly and repair.

📋 Manual Details

Coverage Areas

Primary Coverage:

Mechanical components, electrical components, bodywork, accessories

Secondary Coverage:

Chassis, suspension, braking systems, fuel system, exhaust system

Page Count

Estimated Pages:

150-250

Manual Type

Type:

Parts Manual / Parts Catalog

Language

Language:

English

Format

Format:

Digital (likely PDF)

📖 Manual Coverage

Systems Covered

Engine Assembly:

Complete breakdown of engine components, including cylinder, piston, crankshaft, valves, camshaft, timing system.

Fuel System:

Carburetor/Fuel Injection components, fuel pump, fuel lines, fuel tank, filters.

Ignition System:

Spark plug, ignition coil, CDI unit, wiring harness.

Transmission System:

CVT (Continuously Variable Transmission) components: variator, torque converter, clutch, drive belt, gears.

Braking System:

Front and rear brake calipers, brake discs, brake pads, brake lines, master cylinders, brake levers.

Suspension System:

Front fork assembly, rear shock absorber, swingarm components, linkages.

Electrical System:

Wiring harnesses, lighting (headlight, taillight, turn signals), battery, starter motor, alternator, switches, fuses.

Bodywork And Frame:

Chassis frame, fairings, body panels, seat, storage compartment, handlebars, footrests.

Exhaust System:

Exhaust pipe, muffler, heat shields, gaskets.

Wheels And Tires:

Wheel rims, tires, inner tubes (if applicable), wheel bearings, valve stems.

Procedures Included

Identification Of Parts:

Clear identification of every single part with corresponding part numbers for ordering and replacement.

Assembly Disassembly Guidance:

Visual guidance through exploded views for strip-down and rebuild processes.

Component Location:

Illustrates the correct placement and integration of each component within the scooter's systems.

Technical Depth

Depth:

Comprehensive; suitable for detailed mechanical work, part identification, and referencing during repairs or rebuilds.

Target Audience:

Technicians, mechanics, experienced DIY enthusiasts, owners undertaking significant maintenance or restoration.

📊 Manual Specifications

File Format

Digital Format Details:

Likely a PDF document with searchable text for easy part number lookup. High-resolution images for clarity.

Print Quality

Image Resolution:

High resolution, suitable for clear viewing of intricate details in exploded diagrams.

Binding Type

Physical Binding:

N/A (assuming digital format, but if printed, would be comb-bound or saddle-stitched for durability).

Paper Type

Physical Paper:

N/A (assuming digital format, but if printed, would ideally be on heavy-duty, matte paper to reduce glare).

⚙️ Engine Specifications

Primary Engine

Engine Type:

Four-stroke, single-cylinder, forced air cooling.

Displacement:

Approximately 125cc (exact figure may vary by specific market version, often around 124.7cc).

Bore X Stroke:

Typically around 52.4 mm x 57.9 mm (example, specific figures in manual).

Valve Configuration:

2-valve SOHC (Single Overhead Camshaft).

Performance

Horsepower:

Estimated 8-10 HP @ 7500-8000 RPM (specific figure in manual).

Torque:

Estimated 9-10 Nm @ 6000-7000 RPM (specific figure in manual).

Fuel System

Fuel Delivery:

Carburetor (e.g., Mikuni VM20-250 or similar) or Electronic Fuel Injection (EFI) depending on model year and market.

Fuel Type:

Unleaded gasoline, minimum 91 octane.

Lubrication

Oil Type:

API SG or higher, SAE 10W-40 or 15W-50 motorcycle oil (specific recommendations in manual).

Oil Capacity:

Approximately 0.8 - 1.0 liters (check manual for precise capacity and filter change quantity).

🔧 Transmission

Standard

Type:

Automatic CVT (Continuously Variable Transmission).

Drive System:

Belt drive to rear wheel.

Features

Gearbox Components:

Variator, torque converter, drive clutch, driven clutch, drive belt.

Transmission Fluid:

No separate transmission fluid; lubricant is integrated within the engine oil for CVT scooters.

📐 Dimensions

Exterior

Length:

Approx. 1870 mm.

Width:

Approx. 715 mm (at handlebars).

Height:

Approx. 1250 mm (to top of windscreen, if equipped).

Seat Height:

Approx. 760-780 mm.

Cargo

Underseat Storage:

Sufficient for one full-face helmet (depending on helmet size and scooter configuration).

Weights

Dry Weight:

Approx. 120-130 kg (depending on specific equipment).

Gross Vehicle Weight Rating:

Approximately 270-300 kg (check manual for specific GVWR).

Fuel Tank Capacity:

Approximately 7-8 liters.

🛡️ Safety Features

Ratings

Crash Test Information:

Not typically subject to automotive crash test ratings; focuses on rider protection through design and component integrity.

Active Features

Braking System:

Front disc brake, rear drum brake (or dual disc on some variants). ABS is rare on this model but possible on later or specific market versions.

Lighting:

Halogen or LED headlights, taillights, and turn signals for visibility.

Passive Features

Frame Construction:

Steel frame for structural integrity.

Tires:

Tubeless tires for reduced risk of sudden deflation.

Mirrors:

Adjustable mirrors for rearward visibility.

💡 Technology Features

Infotainment

Dashboard Features:

Analog/digital combination instrument cluster with speedometer, odometer, fuel gauge, indicator lights (turn signal, oil, high beam).

Driver Assistance

ABS Availability:

Generally not standard, but may be an option on later models or specific high-trim variants. Manual would specify if applicable.

Connectivity

Smartphone Integration:

Not typically featured on this model; basic scooter technology focus.

🔧 Maintenance

Service Intervals

Oil Change Interval:

Typically every 3,000 - 5,000 km or annually, whichever comes first (refer to manual for exact intervals).

Air Filter Cleaning Replacement:

Check/clean every 3,000 km, replace as needed, typically every 6,000 - 10,000 km (refer to manual).

Spark Plug Replacement:

Typically every 5,000 - 10,000 km (refer to manual for type and interval).

Drive Belt Inspection Replacement:

Inspect every 5,000 km, replace typically every 10,000 - 15,000 km or as wear dictates (critical component, check manual).

Valve Clearance Adjustment:

First check around 10,000 km, then as per manual schedule (important for engine performance).

Fluid Specifications

Engine Oil Specification:

SAE 10W-40 or 15W-50, API SG or higher (as specified in manual).

Brake Fluid Type:

DOT 4 (for hydraulic brakes, check specific caliper/master cylinder specs).

Known Issues

Common Wear Items:

Drive belt, brake pads, tires, battery, spark plug, air filter are common replacement items due to mileage and usage.

Potential Issues:

Carburetor gumming if not run regularly, electrical connection corrosion in humid climates, variator or clutch wear over time.

📚 Vehicle History

Brand Heritage

Vespa Legacy:

Vespa, a Piaggio brand, has a storied history dating back to 1946, revolutionizing personal transport with its iconic design and monocoque chassis.

Model Evolution

Fly Series Introduction:

The Fly series was introduced as a modern, practical, and stylish scooter aimed at the global urban commuter market, offering a balance of performance and economy.

Production

Manufacturing Locations:

Vespa scooters, including the Fly, are manufactured in various Piaggio Group plants worldwide, notably Italy, Vietnam, and India.

Key Production Years:

The Fly 125 4T has seen multiple iterations and updates, with initial production likely starting in the early 2000s and continuing with various engine and design updates.

🏆 Awards & Recognition

Recognitions

Industry Awards:

While not a specific award winner for the model itself, Vespa consistently receives recognition for its design, engineering, and brand heritage in the scooter market.

Ratings

Consumer Reviews:

Generally rated well for reliability, style, and urban practicality by owners.

Certifications

Emissions Compliance:

Compliant with relevant emissions standards for its production era (e.g., Euro 3, Euro 4, depending on model year).