Target Audience:
Owners, DIY mechanics, and professional service technicians.
Advantage:
Comprehensive, factory-level information for a specific range of model years, offering complete repair solutions.
Key Selling Points:
Factory accuracy, lifetime usage, multi-device compatibility, printable, detailed visuals.
Primary Coverage:
Full Service, Repair, Troubleshooting
Estimated Pages:
Hundreds
Type:
Factory Service Manual / Workshop Manual
Access Platforms:
Computer, Tablet, Smartphone
Usage License:
Unlimited usage across multiple devices
Fees:
No extra fees or renewal fees
Engine:
Complete engine overhaul, inspection, tuning, and repair procedures.
Transmission:
Disassembly, inspection, repair, and reassembly of the CVT (Continuously Variable Transmission).
Drivetrain:
Front and rear differential service, driveshaft, CV joints, and axle repairs.
Suspension:
Front and rear suspension component inspection, replacement, and alignment procedures.
Brakes:
Brake caliper service, master cylinder, brake lines, fluid bleeding, and rotor/pad replacement.
Electrical:
Wiring diagrams, starter system, charging system, ignition system, lighting, and accessory circuits.
Fuel System:
Fuel pump, fuel filter, carburetor (or fuel injection system) cleaning, adjustment, and troubleshooting.
Cooling System:
Radiator, fan, thermostat, and coolant hose service.
Exhaust System:
Muffler, exhaust pipes, and heat shield inspection and replacement.
Bodywork Chassis:
Frame inspection, body panel removal/installation, seat, and plastic component service.
Maintenance:
Scheduled maintenance, oil changes, filter replacements, lubrication points, and general upkeep.
Troubleshooting:
Comprehensive diagnostic procedures for common and uncommon issues, fault code identification (if applicable).
Repair:
Step-by-step instructions for all mechanical and electrical component repairs.
Disassembly Reassembly:
Detailed guides for component removal and installation with torque specifications.
Technical Data:
Specifications, tolerances, fluid capacities, and wiring diagrams.
Depth:
Professional-grade, covering everything from basic adjustments to complete engine rebuilds and diagnostics.
Diagrams:
Hundreds of detailed photos and exploded diagrams.
Engine Type:
4-Stroke, SOHC, 4-Valve, Single-Cylinder
Bore X Stroke:
84.5 mm x 75.0 mm
Cooling System:
Liquid-cooled
Horsepower:
Approximately 19-20 HP (typical for this class, specific figures often not published for ATVs)
Torque:
Specific torque figures are not readily available in general documentation, but the manual would provide precise measurements.
Fuel Delivery:
Mikuni BSR34 carburetor (for most models in this range, some later models might have FI, but manual title suggests carb)
Fuel Type:
Unleaded gasoline, 87 octane or higher recommended.
Ignition System:
CDI (Capacitor Discharge Ignition)
Oil Type:
Yamalube 4G or equivalent SAE 10W-40 API SG or higher motorcycle oil.
Oil Capacity:
Approximately 2.1 Liters (with filter change) - Manual will confirm exact capacity.
Transmission Type:
Yamaha Constant Velocity Transmission (CVT)
Drive Modes:
2WD/4WD selectable with Ultramatic® transmission.
Engine Braking:
Integrated engine braking system for downhill control.
Gearbox:
High/Low range with Reverse.
Cvt Fluid:
Yamalube High-Performance Gear Oil or equivalent SAE 80W-90 GL-4 Hypoid Gear Oil.
Final Drive Oil Capacity:
Approximately 0.22 Liters (Front Differential), 0.25 Liters (Rear Differential) - Manual will confirm.
Length:
Approx. 2,570 mm (101.2 in)
Width:
Approx. 1,230 mm (48.4 in)
Height:
Approx. 1,140 mm (44.9 in)
Wheelbase:
Approx. 1,835 mm (72.2 in)
Dry Weight:
Approx. 267 kg (589 lbs)
Payload Capacity:
Approx. 200 kg (441 lbs)
Towing Capacity:
Approx. 453 kg (1,000 lbs)
Atv Safety Standards:
Meets ANSI/SVIA-1-2010 standards for Class 1 ATVs (as applicable for the period).
Braking System:
Hydraulic disc brakes front and rear, with parking brake.
Seatbelts:
Not standard, owner's manual and manual would detail safety best practices.
Roll Cage:
N/A (Designed as an open ATV, requires rider safety awareness).
Engine Oil Change:
Every 100 hours or 6 months, whichever comes first. (Manual will detail specific conditions).
Air Filter Cleaning:
Every 20 hours or 3 months, clean and every 100 hours or 6 months replace. (Manual will detail specific conditions).
Spark Plug Replacement:
Inspect every 100 hours or 6 months, replace as needed or per manual recommendation.
Valve Clearance Check:
Every 200 hours or 12 months.
Engine Oil:
Yamalube 4G or SAE 10W-40 API SG or higher.
Coolant:
High-quality, permanent type antifreeze coolant (50/50 mix of ethylene glycol and distilled water).
Brake Fluid:
DOT 3 or DOT 4 brake fluid.
Common Wear Items:
CVT belt wear, suspension bushings, wheel bearings, and brake component wear are common for ATVs of this age and usage.
Carburetor Cleaning:
Carburetors can become gummed up if the ATV sits for extended periods without fuel stabilizer.
Manufacturer:
Yamaha Motor Corporation, known for its long history in powersports and precision engineering.
Rhino Lineage:
The Rhino series was Yamaha's pioneering entry into the side-by-side utility ATV market, emphasizing ruggedness and capability.
Manufacturing Location:
Typically manufactured in Japan or the USA by Yamaha.
