🏷️ Basic Information

Make:

Yamaha

Model:

VINO 50 / VINO Classic

Year:

2007

Product Type:

Service Repair Manual

Model Codes Covered:

SA24J (for Vino 50), SA24J-B (for Vino Classic)

👋 Introduction

Vehicle Segment:

Lightweight, urban-focused scooter, often favored for its retro styling and ease of use

Target Audience:

Commuters, younger riders, individuals seeking a stylish and economical personal transport solution

Key Competitors Era:

Honda Dio, Kymco Agility 50, SYM Fiddle II 50, Vespa LX 50

Design Philosophy:

Retro-modern styling, emphasizing a classic aesthetic with modern scooter practicality

Versatility:

Ideal for city commuting, short errands, and recreational riding

Ease Of Operation:

Automatic transmission and user-friendly controls make it accessible to riders of all experience levels

📋 Manual Details

Market Segment:

Scooter / Moped

Geographic Coverage:

Global (designed for international markets, likely covering major regional variations if any existed for this model year)

Page Count:

Approximately 250-350 pages (typical for a comprehensive service manual of this era)

Manual Type:

Official Yamaha Factory Service Manual

Manual Purpose:

Repair, diagnostics, maintenance, and troubleshooting

Language:

English

Format:

Digital (PDF) or Printed

📖 Manual Coverage

Engine:

Complete engine overhaul, disassembly, assembly, inspection, tuning, and component replacement (carburetor, ignition, cooling, lubrication)

Transmission:

Automatic CVT (Continuously Variable Transmission) service, clutch, and drive belt maintenance and replacement

Electrical System:

Full wiring diagrams, charging system (stator, regulator/rectifier), ignition system (CDI), lighting, starting system, battery maintenance, and diagnostics

Fuel System:

Carburetor specifications, cleaning, adjustments, fuel pump (if applicable), fuel filter, and fuel tank maintenance

Chassis:

Frame inspection, suspension (front fork, rear shock absorber) overhaul and adjustments, steering system, and wheel bearings

Brakes:

Front and rear brake system service (drum or disc depending on specific Vino Classic variant), brake fluid replacement, caliper/wheel cylinder overhaul, and pad/shoe inspection

Body And Trim:

Panel removal, installation, cosmetic repairs, seat, storage compartment, and fairing components

Cooling System:

Air-cooling system components and inspection (typical for 50cc engines)

Exhaust System:

Exhaust pipe and muffler inspection, gasket replacement

Routine Maintenance:

Oil changes, filter replacements (air, oil if applicable), spark plug service, drive belt inspection, tire pressure checks, chain/belt lubrication (if applicable), and general inspection points

Diagnostic Procedures:

Troubleshooting guides for common issues, electrical system diagnostics, engine performance problems, and component testing

Repair Procedures:

Step-by-step instructions for component removal, installation, and rebuilding (e.g., engine rebuild, carburetor overhaul, brake caliper service)

Adjustment Procedures:

Carburetor idle speed and mixture adjustment, valve clearance (if applicable), brake lever free play, and headlight aiming

Troubleshooting Charts:

Systematic approaches to diagnosing problems based on symptoms

Specifications And Tolerances:

Detailed torque specifications, clearances, fluid capacities, and performance metrics for all components

Depth Level:

Comprehensive (full factory service level, suitable for professional mechanics and skilled DIY enthusiasts)

Diagnostic Tools:

Information on required tools and potential diagnostic equipment

Rebuild Instructions:

Detailed instructions for complete engine and component rebuilding

📊 Manual Specifications

File Type:

PDF (typically)

Searchability:

Searchable text content for quick information retrieval

Image Resolution:

High-resolution diagrams and illustrations for clarity

Document Quality:

Professional layout and formatting as per Yamaha factory standards

Binding:

N/A (if digital) / Professional binding (if printed, e.g., spiral-bound, perfect bound)

Paper Quality:

Durable, high-quality paper suitable for workshop environments (if printed)

⚙️ Engine Specifications

Engine Type:

4-stroke, Air-cooled, SOHC

Engine Displacement:

49 cc (cc - cubic centimeters)

Bore X Stroke:

39.0 mm x 41.4 mm (typical for this engine)

Compression Ratio:

12.0 : 1 (typical for this engine)

Horsepower:

Approx. 4.0 HP @ 7500 RPM (subject to regional regulations and tuning)

Torque:

Approx. 3.0 lb-ft @ 6500 RPM (subject to regional regulations and tuning)

Fuel Delivery:

Carburetor (specific model Mikuni VM16SH or similar)

Fuel Type:

Unleaded Gasoline (minimum 87 octane recommended)

Fuel Tank Capacity:

4.0 Liters (approx. 1.05 US gallons)

Ignition System:

CDI (Capacitor Discharge Ignition)

Lubrication System:

Forced lubrication with separate oil injection system

Spark Plug Type:

NGK CR7HSA or Denso U20FSR-U (verify in manual)

Spark Plug Gap:

0.6 - 0.7 mm (verify in manual)

🔧 Transmission

Transmission Type:

Automatic, V-belt type, CVT

Final Drive:

Gear drive

Clutch Type:

Automatic centrifugal clutch

Drive Belt Maintenance:

Inspection intervals and replacement procedure for the V-belt

📐 Dimensions

Overall Length:

Approx. 1740 mm (68.5 in)

Overall Width:

Approx. 660 mm (26.0 in)

Overall Height:

Approx. 1030 mm (40.6 in)

Wheelbase:

Approx. 1275 mm (50.2 in)

Dry Weight:

Approx. 80 kg (176 lbs)

Wet Weight:

Approx. 85 kg (187 lbs) (with fluids)

Underseat Storage:

Sufficient for a full-face helmet or groceries

Front Tire Size:

3.50-10 4PR

Rear Tire Size:

3.50-10 4PR

Wheel Type:

Cast aluminum alloy

🛡️ Safety Features

Safety Compliance:

Adheres to relevant safety standards for motorcycles/scooters in its target markets

Braking System:

Front disc brake, Rear drum brake (typical configuration, verify in manual)

Lighting:

Halogen headlamp, LED tail/brake lights, standard turn signals

Frame Construction:

Steel tube frame providing rigidity and stability

Parking Brake:

Usually integrated into the rear brake lever or a separate mechanism

💡 Technology Features

Instrument Cluster:

Analog speedometer, odometer, fuel gauge, and indicator lights

ABS:

Not equipped with ABS

Charging Port:

Typically does not feature a built-in charging port for devices

🔧 Maintenance

Engine Oil Change:

Every 3,000 km or 6 months, whichever comes first (refer to manual for exact intervals)

Air Filter Cleaning Replacement:

Every 6,000 km or 12 months, or as needed based on riding conditions

Spark Plug Replacement:

Every 10,000 km or 12 months

Drive Belt Inspection:

Every 12,000 km or 12 months, replacement recommended around 20,000 km or as indicated by wear

Brake Fluid Replacement:

Every 24,000 km or 24 months

Engine Oil Type:

Yamalube 4 (or equivalent SAE 10W-40 API SG or higher)

Engine Oil Capacity:

0.70 Liters (without oil filter change)

Gear Oil Type:

Yamalube Gear Oil (or equivalent SAE 80 hypoid gear oil)

Gear Oil Capacity:

0.11 Liters

Common Wear Items:

Drive belt, brake pads/shoes, tires, and spark plugs are typical wear items requiring periodic replacement.

Carburetor Issues:

Carburetor jets can become clogged over time due to fuel deposits, leading to starting issues or poor performance, requiring cleaning and adjustment.

Electrical Connections:

Corrosion or loose connections in wiring harnesses can cause intermittent electrical faults.

📚 Vehicle History

Yamaha Legacy:

Yamaha Motor Company, established in 1955, renowned for its innovation in motorcycles, musical instruments, and marine products. Yamaha has a long history of producing reliable and performance-oriented scooters.

V Series Lineage:

The Vino nameplate has been used for stylish, retro-styled scooters across various displacement sizes and generations since the late 1990s. The 2007 model represents a refined iteration of this popular design.

Manufacturing Location:

Primarily manufactured in Taiwan by Yamaha's manufacturing partners, adhering to strict Yamaha quality control.

Model Lifespan:

The Vino 50 platform has seen consistent production and updates over many years, making it a stable and well-supported model.

🏆 Awards & Recognition

Model Reputation:

The Yamaha Vino series is generally recognized for its reliability, fuel efficiency, and stylish design within the 50cc scooter segment.