🏷️ Basic Information

Make:

Yamaha

Model:

XV750 Virago

Model Code:

XV750

Year:

1981-1983

👋 Introduction

Market Position:

The Yamaha XV750 Virago was a groundbreaking cruiser motorcycle that helped establish Yamaha's presence in the American cruiser market, often competing with Harley-Davidson and other Japanese manufacturers' V-twin offerings.

Key Features:

Shaft drive, V-twin engine, classic cruiser styling, and Yamaha's reputation for reliability.

📋 Manual Details

Covered Years:

1981, 1982, 1983

Page Count:

358

Manual Type:

Service Workshop Manual

Language:

English

Format:

PDF

📖 Manual Coverage

Engine:

Detailed inspection, diagnosis, repair, and overhaul of the V-twin engine, including carburetion, ignition system, lubrication, cooling, and exhaust.

Transmission:

Service and repair procedures for the gearbox, clutch, and final drive (shaft drive).

Electrical System:

Comprehensive wiring diagrams, troubleshooting for starting, charging, lighting, ignition, and all accessory circuits.

Suspension:

Front fork and rear shock absorber service, adjustment, and replacement, including spring rates and damping.

Brakes:

Front and rear brake system diagnosis, maintenance, and repair, including hydraulic components and friction materials.

Chassis And Frame:

Frame inspection, steering head bearing service, and general chassis components.

Fuel System:

Carburetor (Mikuni BS34) overhaul, adjustment, and synchronization, fuel tank, and fuel pump.

Bodywork And Trim:

Removal, installation, and repair of body panels, fenders, fuel tank, and seat.

Ignition System:

Diagnosis and repair of the CDI ignition system, including ignition coil testing and timing procedures.

Charging System:

Testing and repair of the alternator, regulator/rectifier, and battery charging circuit.

Instrumentation:

Installation, removal, and troubleshooting of the speedometer, tachometer, and indicator lights.

Maintenance:

Routine service tasks, lubrication schedules, filter changes, spark plug replacement, and valve clearance adjustment.

Troubleshooting:

Systematic diagnostic procedures for common and uncommon problems, fault finding charts.

Repair And Rebuild:

Detailed step-by-step instructions for component disassembly, cleaning, inspection, repair, and reassembly.

Technical Specifications:

Torque specifications, clearances, fluid capacities, electrical values, and more.

Wheel And Tire Service:

Tire replacement, wheel balancing, spoke tensioning (if applicable), and bearing maintenance.

Carburetor Sync:

Detailed steps for synchronizing the dual carburetors for optimal engine performance.

Engine Tuning:

Guidance on adjusting idle speed, mixture, and ignition timing.

Steering Head Service:

Inspection, adjustment, and replacement of steering head bearings.

Rear Shock Maintenance:

Removal, service, and installation of rear shock absorbers.

Depth:

Comprehensive, covering from basic rider maintenance to in-depth engine and transmission overhauls, suitable for professional mechanics and experienced enthusiasts.

Diagrams And Illustrations:

Includes detailed exploded views, wiring diagrams, and troubleshooting flowcharts.

📊 Manual Specifications

File Format:

PDF (Portable Document Format)

Searchable Text:

Yes, typically PDF downloads are text-searchable for efficient information retrieval.

Printable:

Yes, the PDF can be printed for workshop use.

Print Quality:

High-resolution scans of original factory manual pages, ensuring clarity of text and diagrams.

Binding Type:

N/A (Digital Download - PDF)

Paper Type:

N/A (Digital Download - PDF)

⚙️ Engine Specifications

Engine Type:

Air-cooled, 748cc, 70-degree V-twin

Bore X Stroke:

83.0 mm x 69.0 mm

Compression Ratio:

8.5:1

Valve Train:

SOHC, 2 valves per cylinder

Carburetion:

Dual Mikuni BS34 carburetors

Cooling System:

Air-cooled

Ignition Type:

CDI (Capacitor Discharge Ignition)

Horsepower Est:

Approximately 55 HP @ 7000 RPM

Torque Est:

Approximately 46 lb-ft @ 5500 RPM

Peak Power Delivery:

Mid-range torque focused, typical for a cruiser engine.

Fuel Capacity:

Approx. 16 Liters (4.2 US Gallons)

Fuel Type:

Unleaded gasoline

🔧 Transmission

Transmission Type:

5-speed manual

Final Drive:

Shaft drive

Clutch Type:

Wet multi-plate

📐 Dimensions

Length:

Approx. 2235 mm (88.0 in)

Width:

Approx. 770 mm (30.3 in)

Height:

Approx. 1170 mm (46.1 in)

Wheelbase:

Approx. 1520 mm (59.8 in)

Ground Clearance:

Approx. 135 mm (5.3 in)

Seat Height:

Approx. 755 mm (29.7 in)

Dry Weight Est:

Approx. 198 kg (436.5 lbs)

Wet Weight Est:

Approx. 218 kg (480.6 lbs)

🛡️ Safety Features

Safety Ratings:

N/A (Motorcycle, safety is primarily rider-dependent and engineering design)

Active Features:

Responsive braking system, stable chassis geometry.

Passive Features:

Robust frame construction, integrated lighting system.

💡 Technology Features

Infotainment Features:

N/A (Basic motorcycle instrumentation including speedometer, tachometer, and warning lights)

Driver Assistance Features:

N/A (No electronic rider aids typical of modern motorcycles)

Connectivity Features:

N/A

🔧 Maintenance

Oil Change Interval:

Every 3,000-5,000 km or 6-12 months, refer to manual for exact specification.

Valve Clearance Check:

Recommended every 10,000-15,000 km, refer to manual for exact specification.

Spark Plug Replacement:

Recommended every 10,000-20,000 km, refer to manual for exact specification.

Engine Oil Type:

Yamaha recommends SAE 10W-40 API SG or similar, check manual for specific viscosity and API rating.

Engine Oil Capacity:

Approx. 2.4 Liters (2.5 US qt) without filter change, 2.6 Liters (2.7 US qt) with filter change. Verify with manual.

Brake Fluid Type:

DOT 3 or DOT 4 (check manual for specific recommendation)

Final Drive Oil Type:

Yamaha recommends SAE 80 hypoid gear oil, check manual for specific viscosity.

Coolant Type:

Air-cooled engine, no coolant required.

Common Issues:

Carburetor synchronization and jetting, potential starter clutch wear, charging system output, and general age-related wear on seals and electrical components.

📚 Vehicle History

Brand Heritage:

Yamaha's long-standing reputation for producing high-quality, innovative, and reliable motorcycles across various categories, from sportbikes to cruisers.

Model Evolution:

The XV750 Virago was part of Yamaha's cruiser line, introduced to capture the growing market segment. It featured a distinctive V-twin engine and styling that evolved over its production run.

Key Innovations Of Era:

The early 1980s saw Japanese manufacturers pushing the boundaries of cruiser design, with Yamaha leading the charge with the Virago's blend of V-twin power and shaft drive, aiming for a sophisticated cruiser experience.

Production Period:

1981-1983 for this specific generation/manual coverage. The Virago line continued with updated models.