Tractor Type:
Four-wheel drive (4WD) tractor
Primary Purpose:
Versatile utility tractor suitable for a wide range of agricultural tasks including ploughing, tilling, hauling, and operating various implements.
Operator Comfort:
Designed with a focus on operator comfort and ergonomics for extended use.
Versatility:
Capable of operating a wide range of front and rear-mounted implements through its robust PTO and hydraulic systems.
Engine Systems:
Engine overhaul, cooling system, lubrication system, fuel system, intake and exhaust systems, engine diagnostics and troubleshooting.
Drivetrain Systems:
Clutch, gearbox (transmission), front axle, rear axle, differential, PTO (Power Take-Off) system, hydraulics.
Braking System:
Service and repair of mechanical and hydraulic braking systems.
Steering System:
Hydraulic power steering system components and service.
Electrical System:
Wiring diagrams, starter, alternator, battery, lighting, instrument panel, troubleshooting electrical faults.
Hydraulic System:
Hydraulic pump, control valves, cylinders, filters, troubleshooting hydraulic issues, specific hydraulic circuit diagrams.
Chassis And Body:
Frame, fenders, operator's station, hitch system, ballast adjustments.
Maintenance:
Scheduled maintenance tasks, fluid checks and changes, filter replacements, lubrication points.
Troubleshooting:
Systematic diagnostic procedures for identifying and resolving common and uncommon faults.
Repair:
Step-by-step instructions for component disassembly, inspection, repair, and reassembly.
Diagnostics:
Detailed diagnostic charts and procedures for all major systems.
Engine Timing Adjustment:
Detailed procedures for setting fuel injection timing.
Valve Adjustment:
Instructions for checking and adjusting engine valve clearances.
Transmission Overhaul:
Step-by-step guide for complete gearbox disassembly and reassembly.
Hydraulic Pump Rebuild:
Procedures for repairing or replacing the main hydraulic pump.
Electrical Component Testing:
Methods for testing alternators, starter motors, and sensors.
Wiring Diagram Interpretation:
Full electrical schematics with component identification and wire tracing guidance.
Depth Of Coverage:
Comprehensive, covering basic maintenance to major overhaul and repair procedures. Includes detailed technical specifications and tolerances.
Diagnostic Charts:
Includes detailed troubleshooting charts with symptoms, possible causes, and corrective actions.
Torque Specifications:
Comprehensive listing of all critical torque values for fasteners and assemblies.
Special Tools:
Identification of specific tools required for certain repair procedures.
Component Tolerances:
Precise measurements and clearances for critical engine and drivetrain components.
Engine Manufacturer:
Zetor (likely manufactured by Zetor)
Engine Model:
Likely Zetor 6301 (or similar 4-cylinder turbocharged diesel)
Engine Displacement:
Likely around 3.1 to 3.5 Liters (depending on the specific 4-cylinder engine variant).
Horsepower Rating:
Approximately 60-65 HP (net)
Torque Rating:
Specific torque figures would be detailed in the manual, typically in the range of 220-240 Nm.
Injection Type:
Direct injection, likely with mechanical injection pump (e.g., Bosch or Zetor-specific).
Filtration:
Includes details on fuel filters and their replacement intervals.
Cooling Type:
Liquid-cooled
Gearbox Type:
Synchronized Manual Transmission
Number Of Gears:
Typically 10 forward and 2 reverse gears (e.g., 2WD/4WD range selection plus 5 gears in each range).
Power Take Off:
Multi-speed PTO (e.g., 540 RPM and 1000 RPM), rear PTO.
Clutch Type:
Single-plate dry clutch (standard).
Transmission Oil Type:
UTTO (Universal Tractor Transmission Oil) or specific transmission fluid as per Zetor specifications.
Length:
Detailed specifications available in manual, generally around 3.7 - 4.0 meters.
Width:
Detailed specifications available in manual, generally around 1.8 - 2.0 meters.
Wheelbase:
Detailed specifications available in manual, typically around 2.1 - 2.3 meters.
Operating Weight:
Typically in the range of 2800-3200 kg (without ballast).
Front Axle Weight:
Specifications for front axle load capacity available in the manual.
Rear Axle Weight:
Specifications for rear axle load capacity available in the manual.
Engine Oil Change:
Typically every 250-500 operating hours, depending on operating conditions.
Transmission Oil Change:
Usually every 1000-1500 operating hours.
Engine Oil Type:
Diesel engine oil, typically API CG-4 or higher, with viscosity grade like 15W-40.
Hydraulic Fluid Type:
Hydraulic oil, typically ISO VG 46 or equivalent (UTTO - Universal Tractor Transmission Oil might also be specified for transmission and hydraulics).
Coolant Type:
Ethylene glycol based antifreeze/coolant, with a 50/50 mix with distilled water.
Common Wear Items:
Clutch wear, hydraulic seal leaks, PTO clutch engagement issues, electrical connection corrosion.
Hydraulic System Performance:
Potential for reduced hydraulic flow or pressure due to worn pump or leaky cylinders.
Pto Engagement:
Slipping PTO clutch or difficult engagement might require adjustment or replacement.
