Target audience:
Technicians, DIY owners, and equipment enthusiasts working on Case 580 Super E backhoe loaders.
Competitive advantage:
Known for durability and reliability, the 580 Super E offers a robust design for demanding construction and agricultural tasks.
Engine power:
Typically 4-cylinder diesel, approx. 70-80 HP (refer to manual for exact specs)
Transmission options:
8-speed synchronised or power shuttle
Hydraulics:
Open centre hydraulic system with detachable backhoe
Systems covered:
Comprehensive service and repair information for all major systems including engine, transmission, hydraulics, electrical, brakes, and more.
Procedures included:
Overhaul, disassembly, reassembly, adjustment, calibration, and troubleshooting.
Technical depth:
Factory-level detail with full specifications and tolerances.
Parts information:
Exploded-view diagrams and OEM part numbers.
Page count:
N/A - not specified for this manual
Manual type:
Service and repair manual (also includes diagnostic and wiring information)
File format:
PDF (searchable, zoomable, printable, bookmarked)
Delivery method:
Instant digital download
Engine:
Mechanical overhaul, disassembly, inspection, reassembly, specifications
Transmission and drivetrain:
Gearbox, clutch, differential service and repair
Hydraulic system:
Pumps, cylinders, valves, hoses - service and testing
PTO and three-point hitch:
Adjustment, repair, calibration
Electrical system:
Alternator, starter, complete wiring diagrams
Brake system:
Service and parking brake overhaul
Steering and front axle:
Power steering, tie rods, kingpins
Cooling and heating:
Not explicitly listed, but covered in general service sections
General information and safety:
Safety warnings and general service procedures
Maintenance schedules:
Scheduled maintenance tasks and intervals
Troubleshooting:
Symptom-based diagnostics and flowcharts
Electrical testing:
Multimeter procedures and wiring diagnostics
Component verification:
Function tests and wear limit inspections
Assembly and disassembly:
Step-by-step illustrations and tool usage
Factory specifications:
All specifications, tolerances, and wear limits
Torque values:
Factory torque specs for all fasteners
Special tools:
Part numbers and illustrations for special service tools
Exploded diagrams:
Detailed parts diagrams with OEM part numbers
Component identification:
Location guides for all systems
Compatibility:
Windows PC, Mac, tablets, smartphones
Requirements:
A PDF reader
Searchability:
Searchable text (OCR-enabled)
Print quality:
High-resolution images and diagrams suitable for clear printing
Binding type:
Digital (no physical binding)
Paper type:
N/A - digital format
Model:
4-390 or similar naturally aspirated diesel
Configuration:
Inline 4-cylinder
Displacement:
Approx. 3.9 L (239 cu in) - refer to manual
Power output:
Approx. 70-80 hp at rated RPM
Torque:
Approx. 220-250 lb-ft (refer to manual)
Fuel system:
Direct injection, mechanical fuel injection pump
Available options:
Standard; some units may have optional turbocharged variant (refer to manual)
Type:
8-speed synchronised manual
Clutch:
Dry disc, hydraulic actuation
Features:
Synchronised gear engagement for smooth shifting
Type:
Power shuttle with 4 speeds forward/reverse
Features:
Direction changes without clutching
Wheelbase:
Approx. 85-90 in (2160-2290 mm) - refer to manual
Overall length:
Approx. 20-21 ft (6.1-6.4 m) depending on configuration
Overall width:
Approx. 8 ft (2.4 m) with standard tires
Height:
Approx. 10-11 ft (3.0-3.4 m) with ROPS
Curb weight:
Approx. 14,000-16,000 lb (6,350-7,260 kg) depending on options
Engine oil:
Every 250 hours or annually (check manual)
Hydraulic fluid:
Check level daily; change per manual (approx. 1000 hours)
Transmission fluid:
Every 500 hours or as per maintenance schedule
Filters:
Replace per scheduled intervals (air, fuel, oil)
Engine oil:
API CF or higher, 15W-40 (typical for diesel)
Hydraulic system:
Case Hy-Tran or equivalent (10W-30)
Transmission and rear axle:
SAE 80W-90 gear oil
Common wear items:
Pins and bushings in loader and backhoe linkages
Common problems:
Hydraulic oil leaks from cylinder seals or hoses; starter motor issues
Manufacturer:
Case Corporation (now Case IH)
Founding:
Founded in 1842 as J.I. Case Threshing Machine Company
Series:
580 Construction King series
Super E generation:
Introduced around 1985, replacing the 580D
Successor:
Replaced by 580K in 1992
Assembly:
Manufactured in Racine, Wisconsin, and Burlington, Iowa
