Target audience:
Small to medium-sized farms, livestock operations, and hobby farmers
Competitive advantage:
Reliable, fuel-efficient engines, comfortable operator station, and easy maintenance compared to similar utility tractors
Engine:
4-cylinder diesel, high torque reserve
Transmission:
Synchro Shuttle or Dual Command (optional)
Hydraulics:
Open center, up to 3 rear remote valves
Operator environment:
Spacious platform, low noise, excellent visibility
Engine:
Operation, maintenance, fuel system, air cleaner, cooling
Transmission:
Gear shifting, shuttle operation, Dual Command operation
Hydraulics:
Three-point hitch, remote valves, hydraulic oil maintenance
Electrical:
Battery, charging, starting, lights, fuses
PTO:
Rear PTO operation, speed selection, maintenance
Brakes:
Brake adjustment, parking brake
Steering:
Power steering operation, front axle lubrication
Pre-operation checks:
Daily walk-around, fluid levels, tire pressure
Routine maintenance:
Engine oil, oil filter, fuel filter, air filter, hydraulic fluid change
Lubrication:
Grease points, oil types, intervals
Adjustments:
Belt tension, clutch, brakes, tie-rod ends
Troubleshooting:
Engine starting issues, hydraulic problems, electrical faults
Level:
Operator level with some service information
Photographs and diagrams:
Extensive illustrations to aid understanding
Compatibility:
Windows, Mac, iOS, Android, any PDF reader
Requirements:
PDF reader software
Searchability:
Text searchable (electronic PDF)
Print quality:
High resolution, suitable for printing
Binding type:
Digital (no binding)
Paper type:
N/A - digital download
Primary engine:
FPT (Fiat Powertrain Technologies) 4-cylinder diesel
Engine displacement:
3.6 L (WorkMaster 65), 3.6 L (WorkMaster 75)
Rated power:
65 hp (WorkMaster 65), 75 hp (WorkMaster 75) at rated rpm
Maximum torque:
30-40% torque rise
Emission compliance:
Tier 4B / Stage IV (approximate)
Fuel injection:
Common rail direct injection
Fuel tank capacity:
Approximately 13.2 gallons (50 liters)
Wheelbase:
Approximately 82.7 inches (2100 mm)
Length (without 3PL):
Approximately 135 inches (3430 mm)
Height (ROPS):
Approximately 98 inches (2490 mm)
Curb weight:
Approximately 7,500 lbs (3400 kg)
Ratings and Certifications
Crash test rating:
N/A - not applicable for agricultural tractors
Safety start switch:
Engine start only in neutral with PTO disengaged
Deadman switch:
Operator presence switch on seat
Fender-mounted controls:
Easy access promotes safe operation
Rollover protection:
Rollover Protective Structure (ROPS) standard
Seat belt:
Operator seat belt provided
Lighting:
Halogen work lights (optional)
Audio system:
N/A - not factory installed
Digital display:
Instrument panel with digital readouts (engine speed, fuel level, temperature)
Rear camera:
Optional rear vision camera for improved visibility
GPS / auto steer:
N/A - not standard; aftermarket options may be available
Engine oil change:
Every 250 hours or annually, whichever comes first
Oil filter change:
Every 250 hours
Fuel filter change:
Every 500 hours
Air filter service:
Clean and inspect every 50 hours, replace as needed
Hydraulic fluid change:
Every 2,000 hours or 5 years
Coolant change:
Every 4,000 hours or 4 years
Engine oil:
SAE 15W-40, API CJ-4 or higher
Hydraulic oil:
New Holland Ambra Master or equivalent
Transmission oil:
Same as hydraulic oil (shared sump)
Known Issues / Common Wear Items
Electrical connectors:
Corrosion may occur; inspect and clean periodically
Tire pressure:
Check regularly; proper inflation extends tire life
Cooling fan belt:
Inspect for wear every 500 hours; replace as needed
Manufacturer:
New Holland (CNH Industrial)
Heritage:
New Holland brand traces back to 1895, merger with Ford and Fiat
Model series:
WorkMaster series introduced 2015, updated 2019
Predecessor:
Ford / New Holland 6640 and 7740 models
Assembly plant:
Basildon, UK (for European markets)
Other plants:
N/A - not specified for this model
