Model Series:
BF115A / BF130A
Model Variant:
BF115A (115 hp), BF130A (130 hp)
Production Years Covered:
2000-2006 (typical for BF115A/BF130A)
Engine Type:
4-stroke, SOHC, 4-cylinder, water-cooled
Target Audience:
Marine technicians and DIY outboard owners
Positioning:
Mid-range outboard motors for recreational and light commercial boats
Key Advantage:
PGM-FI and electronic ignition for reliable performance and fuel efficiency
Durability:
Engineered for saltwater and freshwater environments
Fuel System:
Programmed Fuel Injection (PGM-FI)
Ignition:
Electronic ignition
Gear Shift:
Forward-Neutral-Reverse (F-N-R) selector
Manual Type:
Service Repair Manual
Format:
PDF (digital download)
Delivery Method:
Instant download after purchase
Binding:
Digital (not physically bound)
Page Count:
N/A - not specified for this manual
Coverage:
BF115A and BF130A outboard motors
Content:
Technical specifications, assembly/disassembly, diagnostics, troubleshooting, maintenance, wiring diagrams, service bulletins
Engine Mechanical:
Cylinder head, valve train, timing belt, pistons, crankshaft, etc.
Fuel System:
PGM-FI components, fuel pump, injectors, fuel lines
Ignition System:
Electronic ignition components, spark plugs, ignition timing
Cooling System:
Water pump, thermostat, cooling passages
Lubrication System:
Oil pump, oil filter, lubrication points
Electrical System:
Battery, charging system, starting system, sensors
Gearcase:
Forward-Neutral-Reverse gear shift, propeller shaft, gears
Power Trim and Tilt:
Trim motor, hydraulic system
Mid-Section:
Mounting brackets, swivel bracket, tilt tube
Steering:
Steering handle, remote control compatibility
Timing Belt Service:
Inspection, replacement, tension adjustment
Belt Tensioner Adjustment:
Procedure and specifications
Spark Plug Replacement:
Gap and torque specifications
Thermostat Inspection:
Testing and replacement
Fuel Injector Service:
Cleaning and testing
Water Pump Impeller:
Replacement and inspection
Lower Unit Removal:
Disassembly and reassembly
Valve Clearance Adjustment:
Specifications and procedure
Diagnostics:
Troubleshooting charts and error codes
Wiring Diagrams:
Full-color schematics
Service Bulletins:
Supplemental technical updates
Part Numbers:
OEM part numbers included where applicable
Exploded Views:
Illustrations of assemblies
File Format:
PDF (searchable, bookmarked, zoomable)
Compatibility:
Windows, macOS, Linux, iOS, and Android — any device with a PDF reader
Requirements:
A PDF reader application (e.g. Adobe Acrobat Reader, free)
Searchability:
Fully text searchable for fast lookup of any topic
Print Quality:
High-resolution digital pages, printable at full clarity
Binding Type:
N/A — digital download, no physical binding
Paper Type:
N/A — digital download, no physical paper
Engine Type:
4-stroke, SOHC, 4-cylinder
Bore x Stroke:
N/A - not specified for this model
Compression Ratio:
N/A - not specified for this model
Fuel System:
Programmed Fuel Injection (PGM-FI)
Horsepower:
BF115A: 115 hp; BF130A: 130 hp
RPM at Max Power:
5500 rpm
Available Models:
BF115A (115 hp), BF130A (130 hp)
Wheelbase:
N/A - not applicable to outboard motors
Length:
N/A - not specified for this model
Shaft Length:
N/A - not specified for this model
Curb Weight:
N/A - not specified for this model
Dry Weight:
Approx. 220 kg (485 lbs) - typical for this class
Crash Test Ratings:
N/A - not applicable to outboard motors
Certifications:
N/A - not specified for this model
Overheat Protection:
Yes - audible alarm and power reduction
Low Oil Pressure Alert:
Yes - warning system
Over-Rev Limiter:
Yes - electronic rev limiter
Emergency Stop Switch:
Yes - lanyard clip
Corrosion Protection:
Yes - sacrificial anodes and coatings
Break-In Period:
First 20 hours: avoid full throttle
Oil Change:
Every 100 hours or annually
Spark Plugs:
Every 200 hours or annually
Timing Belt:
Inspect every 200 hours, replace every 1000 hours or 5 years
Water Pump Impeller:
Replace every 200 hours or annually
Engine Oil:
SAE 10W-30, API SG or higher
Gear Oil:
Hypoid gear oil SAE 90
Fuel:
Unleaded gasoline, 87 octane or higher
Common Wear Items:
Impeller, spark plugs, timing belt, anodes
Corrosion:
Regular flushing recommended after saltwater use
Fuel System:
Injector clogging if fuel left stagnant
Manufacturer:
Honda Motor Co., Ltd.
Marine Division:
Honda Marine, established 1964
Introduced:
Early 2000s as replacement for BF90/BF130 carbureted models
Updates:
PGM-FI and electronic ignition standard
Discontinued:
Mid-2000s, replaced by BF115/BF135 models
